CEDRUS SB56 Two-Stage Gas-Powered Snow Blower, 6.5 KM

The CEDRUS SB56 two-stage gas-powered snowblower , equipped with a Loncin H200 Snow Series engine (6.5 KM), is designed for clearing snow from driveways and sidewalks with an area of 200–800 m².It combines the metal construction of the chimney and rotor with the most advanced drivetrain in its class—5 forward gears and 2 reverse gears.As an official CEDRUS distributor, we offer a full 2-year consumer warranty and access to authorized service centers.

Key features of the CEDRUS SB56:

• Loncin H200 Snow Series Engine – tested down to -30°C, equipped with a primer to facilitate starting and an oil-level sensor to prevent dry running.
• Metal chimney and deflector – they won’t crack in the cold, unlike the plastic versions found in cheaper models.
• 5 forward gears + 2 reverse gears – the most in the segment of snow blowers priced up to 2,500 PLN.You'll adjust your speed to the snow conditions and terrain.
• Working height: 51 cm – 11 cm more than the NAC STP196L model, which translates to higher performance in deep snow.
• 13" winter tires with an aggressive tread pattern – good traction without the need for snow chains in most conditions.
• Rotor Lubrication Wiper – facilitates maintenance and extends the machine’s service life.

Order the CEDRUS SB56 with free shipping and a 14-day return policy.We are an official distributor of CEDRUS—with us, you get the genuine product and full service support.

Technical characteristics

Who this product is for

The CEDRUS SB56 is a snowblower designed for owners of single-family homes who have a driveway for 2–3 cars, a walkway around the house, and a path to the garage or gazebo.If shoveling snow takes you an hour and leaves you with a sore back, and you don't want to spend a few thousand on professional equipment—you've come to the right place.The SB56 can clear snow from a typical property in 20–40 minutes, with no physical effort required.

Where it works best:

• Driveways made of cobblestones and asphalt, up to 50 m long
• Sidewalks around homes and access paths to outbuildings
• Parking spaces at single-family homes
• Access roads on flat terrain and with gentle slopes
• Areas ranging from 200 to 800 m²—that is, a standard Polish property

When it’s better to choose something else: If you only have a small patio or balcony (less than 50 m²), an electric snowblower will suffice .If you're looking for an electric starter, check out the CEDRUS SB56-E model with ESTART.If the terrain is very steep, consider a tracked model.

Main advantages

Loncin H200 Snow Series Engine – The Winter Specialist Loncin supplies engines m.in.for Husqvarna, Stiga, and AL-KO, and the Snow Series version was designed specifically for use in low temperatures.Tested down to -30°C, with a primer (fuel pump) that makes starting easier after a cold night and an oil-level sensor that automatically shuts off the engine when the oil level is too low.No general-purpose engine offers such guarantees in winter.

Metal chute and deflector – durability you can’t see with the naked eye Many snow blowers in this price range have a plastic chute and deflector.In the cold, plastic becomes brittle—all it takes is a blow from a rock or an icy chunk for it to crack.Both components of the CEDRUS SB56 are made of metal.This isn't just a minor detail—it's the difference between a snowblower that lasts 3 seasons and one that lasts 10 years.

5 forward gears + 2 reverse gears – the most comprehensive drivetrain in its class The competing NAC STP196L has only 4 forward gears and 1 reverse gear.With the SB56, you can smoothly adjust your speed to suit the conditions: slower in wet, heavy snow; faster in light powder.Two reverse gears make it easier to maneuver on narrow inclines and turn around.

Working height of 51 cm – you can clear even deep snow A working height of 40 cm is standard in this segment (the NAC STP196L has this height).SB56 measures 51 cm—that's a difference of 11 cm.When there's heavy snowfall and snowdrifts, this difference determines whether the snowblower can clear the path in a single pass or if you'll have to go over it twice.

13" winter tires with an aggressive tread pattern – traction without chains Wide tires with deep treads provide good traction on snow and ice.In most conditions, you don't need snow chains—the snowblower handles even slightly sloped terrain with ease.It's worth buying chains only for exceptionally slippery surfaces.

Rotor Lubrication Tool – Maintenance in 30 Seconds It’s a small but practical detail. Instead of disassembling the housing to lubricate the rotor, simply squeeze the grease through the grease nipple.Do this every time you refuel, and you can be sure the rotor is running smoothly.Simple, fast, effective.

Check the availability of the CEDRUS SB56 and order with free shipping.When you buy from an official distributor, you get a 2-year warranty and authorized service.

Detailed Product Description

Loncin H200 Snow Series Engine – The Heart of the Snowblower

The 196 cm³ engine, with 6.5 KM (4.2 kW) of power, is a proven winter-use engine.Loncin designed the Snow Series with sub-zero temperatures in mind—hence the reinforced electrical system, freeze-resistant seals, and cold-start primer.The oil level sensor is a safety feature you'll appreciate when you forget to check the oil before the season starts—the engine simply won't start until you top off the oil.This prevents costly seizure.

Two-stage snow removal system – how it works?

In single-stage snow blowers, the auger picks up the snow and immediately ejects it.This works well only with light, dry powder.In the two-stage SB56, the first stage (auger) scoops up and crushes the snow, while the second stage (impeller) ejects it with great force through the chute.As a result, the snowblower can handle wet, heavy snow and snowdrifts, and its discharge range reaches 11 m.You can precisely adjust the direction of the snow discharge using the deflector—the snow lands exactly where you want it to, rather than on the section you just cleared.

Transmission – 5 forward gears, 2 reverse gears

The wheel drive is independent of the rotor's speed—you can drive slowly while the rotor continues to run at full speed.The 5 forward gears offer plenty of flexibility: first and second gears work well in deep, wet snow; third and fourth in standard snowfall; and fifth in light powder.Two reverse gears make it easier to maneuver on narrow inclines—you don't have to turn around every meter.

Construction and materials – metal, not plastic

The rotor housing, chimney, and deflector are made of metal.This is no coincidence—these are critical components that, during operation, are exposed to impacts from rocks, chunks of ice, and other obstacles hidden beneath the snow.Metal is frost-resistant and impact-resistant; plastic becomes brittle at low temperatures.The frame and housing are sturdy, and all the controls (gear lever, handles) are designed to be easy to operate even while wearing thick gloves.

Performance in Practice – How Many Meters Can You Clear in an Hour??

With a working width of 56 cm and an actual working speed of approximately 2–3 km/h (including maneuvering), the snowblower can clear 500–800 m² per hour.For example: It takes about 20–30 minutes to clear snow from a 300 m² driveway..The sidewalk around the house (approx..100 m²) is another 10 minutes.For a standard property, the whole process takes less than an hour—instead of 2–3 hours with a shovel.

Comparison with Other Models

The table below shows how the CEDRUS SB56 compares to competing models in the two-stage snowblower segment.You can find a detailed overview in our ranking of gas-powered snow blowers priced up to 2,500 zł.

The CEDRUS SB56 offers the most comprehensive drive system and the highest working height in its class, while retaining a metal construction for its critical components.The SB56-E model is an option for those who prefer an electric starter—it has a more powerful engine (7 KM) and offers a smoother starting experience.

Buy from an official distributor—2-year warranty and authorized service.No anonymous seller can offer you what we do.

Tips / User Guide

Step-by-Step First-Time Setup

1. Check the oil level – unscrew the dipstick, wipe it dry, put it back in, and pull it out.The level should be between the MIN and MAX lines..If there is no oil, add some (recommended oil: 10W-30).
2. Fill up with fuel – use fresh unleaded gasoline (95).Don't keep fuel in the tank for more than 30 days—it will lose its properties.
3. Use primer – press the rubber pump 3–4 times to get fuel to the carburetor.This makes starting the engine much easier, especially when the engine is cold.
4. Set the choke lever – close the choke (closed position), pull the starter cord.Once the engine starts, open the choke.
5. Warm up the engine – let it idle for 2–3 minutes before you start clearing snow.

How to Maintain a Snowblower—Before, During, and After the Season

Before the season (October/November):

• Change the oil to fresh oil (10W-30).
• Check the condition of the spark plug—if it's worn out, replace it.
• Check your tire pressure and tread depth.
• Lubricate all lubrication points, including the rotor through the grease nipple.
• Check to make sure the bolts and nuts are tight.

During the season:

• Check the oil level every 3–4 uses.
• Lubricate the rotor through the grease nipple every time you refuel.
• After each use, clear the housing and chimney of snow and ice.
• If your snowblower starts to perform poorly, check the spark plug and the air filter.

Off-season (March/April):

• Empty the fuel tank or add a fuel stabilizer (fuel without a stabilizer loses its properties after 30 days and can clog the carburetor).
• Change the oil—contaminants accumulate in the engine at the end of the season, and these can damage the seals over the summer.
• Clean the entire machine and lubricate the moving parts.
• Store in a dry, covered area—preferably in a garage or shed.

Safety During Snow Removal – What to Watch Out For

• Never put your hands in the exhaust pipe while the engine is running. If the chimney becomes clogged, turn off the engine and wait for the rotor to stop.Use the included drain-cleaning tool—not your hands.
• Watch out for obstacles hidden under the snow — curbs, rocks, cables, toys.They may damage the rotor or be ejected with great force.
• Clear snow when visibility is good – avoid working in heavy snowstorms when you can’t see what’s in front of the machine.
• Do not clear snow on steep slopes – the snowblower may lose traction or tip over.
• Always turn off the engine before making adjustments or cleaning — this is a basic rule that’s easy to forget when you’re in a hurry.

Must-Have Accessories

• Snow chains for wheels – useful on extremely slippery surfaces and on steeper hills.Available at Ewimax.en.
• 10W-30 Engine Oil – for topping off and changing.It's a good idea to keep a supply in the garage.
• Spare spark plug – inexpensive, and it could save your season if your old one fails.
• Fuel Stabilizer – required at the end of the season.Prevents the carburetor from clogging.
• Rotor Grease – for use with a calamite.Extends the service life of bearings.

You'll find all the accessories in the Ewimax product lineup.pl – check out the snowblower accessories category.

Frequently Asked Questions (FAQ)

How does a two-stage snowblower differ from a single-stage one??

In a single-stage snowblower, the auger picks up the snow and immediately discharges it.It works well only with light, dry powder on small surfaces.In a two-stage system (such as the CEDRUS SB56), the auger feeds snow to the impeller, which ejects it with great force.This allows it to handle wet, heavy snow, snowdrifts, and larger areas.A two-stage model is a choice that will last for years—a single-stage model will suffice for a season or two if winters are mild.

Can the CEDRUS SB56 handle wet, heavy snow??

Yes.The two-stage snow removal system and the powerful 6.5 KM Loncin engine easily handle wet, packed snow.The key factor here is the 51-cm working height—in deep snow, this gives you the extra clearance that models with a 40-cm height lack.In very wet snow, just drive in a lower gear.

Does a snowblower damage pavers??

No, if you use it correctly.The auger is equipped with rubber strips (known as rubber sliders) that protect the surface from scratches.It's important not to force the snowblower down too hard and not to drive too fast over uneven cobblestones.Under normal use, paving stones are safe.

What is the difference between the SB56 and the SB56-E??

The SB56 has a manual starter (cable).The SB56-E also features an electric starter (ESTART)—simply turn the key to start the engine.The E version also has a more powerful engine (Loncin LC170FDS, 7 KM instead of 6.5 KM).If you want maximum comfort—especially when starting the engine frequently in very cold temperatures—it makes sense to pay extra for the E version.If you shovel snow once or twice a week, the basic model will be more than enough.

How much fuel does the SB56 consume per hour of operation??

The Loncin H200 engine is fuel-efficient—its 3-liter fuel tank lasts for about 1–1.5 hours of continuous operation.This means that for a typical property (300–500 m²), you'll need to refuel once every 2–3 snow removal sessions.Fuel consumption depends on the load—in deep, wet snow, fuel consumption is higher than in light, powdery snow.

Is it worth buying a snowblower from an authorized dealer??

Yes, and for several reasons.First of all, you can be sure that the product is genuine—you won't end up with a counterfeit or an item from a defective batch.Second, the 2-year consumer warranty is provided by an authorized service center, not by an anonymous seller on the platform.Third, you have access to over 20,000 genuine CEDRUS Parts.The price difference between an official distributor and a random seller is often several hundred zlotys—but if the product breaks down after the season is over, those several hundred zlotys in savings turn into the inability to have it repaired.

What is the actual area that the SB56 can clear of snow??

In reality, under normal use (including maneuvering, turning around, and avoiding obstacles), the SB56 clears 500–800 m² of snow per hour.You can clear snow from a 300 m² driveway in 20–30 minutes.The sidewalk around the house (approx..100 m² in 10 minutes.This means that a standard property of up to 800 m² can be cleaned in less than an hour.

Are you ready for winter??The CEDRUS SB56 is waiting for you at Ewimax.pl – the official store of the CEDRUS distributor.Free shipping, 14-day return policy, and 0% interest installment plans.If you have any questions, please contact us—we'll help you choose the model that's best for you.Be sure to check out our guide: How to Choose a Snow Blower to make an informed decision.