
Guide




SUNSEEKER accessories for robotic lawn mowers will expand the capabilities of these devices and help protect them from various external factors.Made from high-quality materials, so they'll last a very long time.

The C-MOW-ROOF-X5-7 charging station cover for Cedrus, Sunseeker X5, X7, and X7 PLUS mowers is a sturdy, attractive canopy designed specifically for the charging stations of Sunseeker Elite and Cedrus series robotic mowers.It protects the docking station and the robot itself from rain, sun, snow, falling leaves, and debris while charging, extending the lifespan of the entire set and enhancing charging safety.
The practical design of the cover keeps the charging station dry and clean even in bad weather, and the robot’s sensors and electronics are less prone to malfunctions caused by moisture or dirt.This accessory is recommended for both home gardens and commercial properties, where the robots operate intensively throughout the season.
The C-MOW-ROOF-X5-7 charging station cover is a dedicated protective "canopy" designed to be mounted over the charging base for Cedrus and Sunseeker X5, X7, and X7 PLUS robotic mowers.Its job is to protect the critical component of the entire system—the docking station, where the robot charges its battery every day and usually spends most of its time, including at night and during bad weather.
The specially designed housing allows the robot to enter and exit easily, while providing maximum protection for the electronics against precipitation and UV radiation.This accessory creates a durable, semi-enclosed "shelter" for your robotic lawn mower.By using the cover, you’re not only protecting your equipment but also enhancing the look of your garden—its modern style blends perfectly with the design of Sunseeker Elite robots.
This product is made of durable, weather-resistant materials, so it can stay outside all season long without needing to be taken down.This is a "set it and forget it" solution—once properly installed, the cover will protect the charging station and the robot for many years.

The charging station cover is mounted directly above the robot's charging base—in the same spot where the station used to be.The structure features sturdy mounting points in the base, allowing it to be secured to the ground (e.g., a concrete slab, paving stones, or a solidly paved garden surface).This makes the entire structure resistant to gusts of wind and accidental impacts.
The cover is most often installed:
Example of everyday use:

The C-MOW-ROOF-X5-7 cover is designed specifically for the Cedrus and Sunseeker X5, X7, and X7 PLUS robotic lawn mowers.Its main purpose is to protect the charging station and the robot when they are not in use, but in practice, this translates into a whole range of tangible benefits that can be felt every day:
Examples of situations in the garden:

The charging station cover was designed to meet the high quality standards typical of the Cedrus brand.Durable materials resistant to weather conditions, including UV radiation, temperature fluctuations, and moisture, have been used here.The sturdy frame provides a solid foundation for the entire roof structure, and its carefully designed geometry ensures that water and snow are directed to the sides, away from the base itself.
Key quality features:
In practice, this means that when you purchase the C-MOW-ROOF-X5-7, you are investing in long-term protection for the robot and the charging station.An example from everyday use: owners of large gardens who use the X7 PLUS robot no longer need to check the weather forecast every time or cover the station with makeshift covers—a permanent, durable cover takes over this function, ensuring peace of mind.
The C-MOW-ROOF-X5-7 cover is designed for the following models of robotic lawn mowers:
This means full dimensional compatibility with the docking stations for these devices.In practice, you don’t need any additional adapters—simply mount the charging base inside the cover and secure the entire unit to the floor according to the robot manufacturer’s instructions.
Intended use:
In each of these locations, using a cover offers tangible benefits: less downtime caused by station failures, easier maintenance of the equipment, and a more professional appearance for the entire system.
The following is a summary of the most important technical information relevant to installation and transport:
These dimensions ensure that the product is stable once installed, while also being easy to transport and store.Weighing 6 kg, it demonstrates the robustness of its construction and the use of durable materials, making the cover not a lightweight, easily deformable fixture, but a serious, professional piece of charging station equipment.
When you decide to purchase a charging station cover, you’re investing in long-term protection for the most critical components of your mowing system and in the convenience of everyday use.This particular model offers:
If you want your robotic lawn mower to operate smoothly for many seasons, the C-MOW-ROOF-X5-7 charging station cover is one of the most important accessories to consider when purchasing a new unit or upgrading an existing one.

1.Does the cover fit all Sunseeker robot charging stations??
The C-MOW-ROOF-X5-7 cover is designed specifically for the charging stations of Cedrus/Sunseeker X5, X7, and X7 PLUS models.It is not intended for use with other robot models or brands, unless the manufacturer explicitly states that it is compatible.
2.Is it complicated to install the cover?
Installation is simple and can be done by the user, provided the instructions are followed.In practice, this involves installing the charging station inside the structure and securing the base of the cover to a stable surface.
3.Can the cover be left outside all winter??
Yes, the structure is designed for year-round outdoor use.During the winter, when the robot is not in use, the charging station and cover can remain in place—you should simply disconnect the power supply and clean any dirt off the components before a long break.
4.Does the cover affect the operation of the robot's sensors or the RTK/GPS system??
The cover is designed so as not to interfere with the robot's docking, charging, or navigation systems.The design leaves enough space for the robot to communicate freely with the base and satellites, and for the proximity sensors to function properly.
5.Are additional mounting accessories required??
Under normal conditions, simply use the fasteners provided by the manufacturer.When installing on non-standard ground (e.g., very soft soil), it is recommended to prepare a stable slab or foundation to ensure the structure has adequate rigidity and wind resistance.
6.Does the guard restrict the robot's movement on steep slopes??
When installed in the correct location, the guard does not obstruct the robot’s entry—you simply need to ensure that the path to the station is as level as possible, and that the approach angle does not exceed the robot manufacturer’s recommendations (these apply to the station itself, regardless of whether a cover is present)..
Warranty Terms and Conditions
Registration: Register your device at https://warranty.elite.sk-robot.com/pl/login within 30 days of the purchase date to receive a 36-month warranty.Without registration, the standard warranty period is 24 months.Battery Warranty: The battery is covered by a 12-month warranty.Regardless of whether the product is registered online.
Warranty Terms and Conditions
1. The warranty is provided by Cedrus Joint Stock Company for a period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases.Warranty
covers goods/equipment purchased on the territory of the Republic of Poland.The rights under this warranty do not cover other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For extended warranties offered by certain manufacturers that exceed 24 months, annual service inspections are required (as noted in the warranty card):
- Weibang lawn mowers: 60 months,
- Cedrus, Cedrus C-TRAC, and Cedrus C-TRAC zero-turn mowers, Simplicity 36 months,
- power tools: 36 months,
- Loncin engines and equipment sold by Cedrus: 36 months,
- Rato motors and equipment sold by Cedrus for 36 months,
- Cedrus generators: 36 months,
- Ariens zero-turn mowers: Edge series—24 months or 150 hours; Ikon Xd—36 months or 300 hours; Apex—48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first).Drive belts, tires, brake pads, batteries, and blades are covered
are guaranteed for 90 days.The 2-belt drive system used in the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z, and ISX 800 is covered by a warranty for a period of 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts).Coilover shock absorbers and all suspension components are covered by the warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- Pubert tillers with a Honda engine: 60 months,
- Cedrus brush cutters with a Kawasaki engine: 36 months,
- Wiper robotic lawn mowers: Trekker series—72 months (notes in the Wiper service app),
- C-MOW robotic lawn mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. For devices with an extended warranty from certain manufacturers, the warranty on motors (manufacturer's warranty), gearboxes, and the paint finish is 24 months from the date of purchase by a consumer or
12 months in other cases.
4. "Warranty repair" refers to specialized work intended to remedy a physical defect covered by the warranty..
5. The following are not covered by the warranty:
a) parts subject to normal wear and tear:
- cutting system components (guides, chains, adapters, blades, wheels, discs, drill bits, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment,
- rubber components (covers, shock absorbers, control O-rings),
- drive components (clutch drums, clutches, drive sprockets, chains, drive shafts, pulleys, V-belts and toothed belts, equipment drive wheels),
- air, oil, fuel, water, and hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, bushings, diaphragms, carburetor jets and valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damage resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
(c) damage caused by the use of fuel, low-quality mixture.
(d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Spółka Akcyjna.
(e) mechanical, thermal, chemical, corrosive and all other damage caused by an act or omission by the User.
f) damage caused by natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
(h) damage resulting from:
- modifications, repairs, and design changes made by the User,
- improper installation, assembly, or use, or failure to follow the instructions, or failure to take proper care of the equipment (use of non-genuine replacement parts and accessories),
- transportation.
(i) damage caused by the use of parts, accessories or cutting system other than original parts.
(j) intentional damage to equipment.
(k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
(l) damage caused by lightning, fortuitous events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months.The warranty for other batteries is 24 months for consumer purchases or 12 months for all other purchases
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The advertiser has the right to exchange the product/device for a new one if an Authorized Service Center confirms in writing that it is impossible to repair the defect or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center.The product/device being returned should be complete and in the same condition as it was at the time
damages.It should also be in appropriately secure packaging.
11. The Authorized Service Provider is obliged to consider the complaint within 14 days from the day the Complainant delivers the goods/device.If recognized as Authorized
The service is obliged to perform its duties within 30 days.
12. The warranty card must be properly filled out.The rights under the warranty may be exercised only after the User presents a valid
warranty card and proof of purchase.Unauthorized changes to the warranty card or performing repairs on your own will void the warranty.
13. In the case of a warranty for rechargeable devices, the serial numbers of all components of the set must be entered in the warranty card.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018.Act of 2018, No..1,000) and as described in the fault report
Ensure uncompromising security.Learn about the details of Sunseeker's warranty and see for yourself why thousands of users choose the Sunseeker brand as a guarantee of reliable performance for many seasons.
TheSunseeker Limited Warranty provides protection against manufacturing and material defects in the device and its components.This applies to products used under normal operating conditions.If a defect is detected, the manufacturer (Sunseeker) or its authorized service center will repair the unit or replace the defective parts with new ones.
To maintain your right to free repairs, please follow these guidelines:
The warranty does not cover defects resulting from:
To file a claim, you must provide valid proof of purchase (a receipt or invoice) that shows the date and place of the transaction.Warranty repairs do not extend the original warranty period—it continues from the date of the original purchase.
This warranty is a voluntary offer by the manufacturer and does not limit the consumer's statutory rights under the warranty.


