O-ring 170x3.55 Cedrus vibrating foot CEDST82H-PRO 540765
- Cedrus 540765 170x3.55 O-ring for the CEDST82H-PRO vibrating foot. A durable seal that ensures a tight seal, protects components, and ensures proper operation of the device. Genuine Cedrus spare part.
170x3.55 Cedrus 540765 O-ring for the CEDST82H-PRO vibrating foot – original replacement seal
O-ring 170x3.55 Cedrus vibrating foot CEDST82H-PRO 540765 is an original Cedrus replacement part designed to seal the working components of the CEDST82H-PRO.This is a sealing ring with dimensions of 170 x 3.55 mm, designed to ensure a tight seal, protect components from contamination, and support the proper operation of the equipment during intensive soil compaction.
Cedrus 540765 170x3.55 O-ring for the CEDST82H-PRO vibrating foot.A durable seal that ensures a tight seal, protects components, and ensures proper operation of the device.Genuine Cedrus spare part.
This product is especially recommended for maintenance work, periodic inspections, and repairs of the Cedrus CEDST82H-PRO vibrating foot..By using a properly selected gasket, you can reduce the risk of leaks, extend the service life of the associated components, and restore the device to full operational efficiency.
Cedrus 170x3.55 O-ring for the CEDST82H-PRO vibrating foot – precise sealing and a secure fit
The Cedrus 170x3.55 O-ring is designed as a sealing component for a specific application in a vibrating screed CEDST82H-PRO.Its dimensions 170 x 3.55 mm allow for proper installation in the designated mounting location, which is crucial for the device’s seal and stable operation.In construction machinery, such as compactors and vibrating plates, even a minor leak can lead to faster wear and tear on components, reduced operational efficiency, or the need for more frequent maintenance downtime.
The most important function of this component is to protect the interior of the work unit from dust, aggregate particles, moisture, and other contaminants typical of a construction site.During daily operation, the vibrating foot is exposed to intense vibrations and contact with soil, sand, ballast, gravel, and cement dust.A properly selected seal helps maintain the correct operating conditions for the mechanism and reduces the risk of malfunctions caused by contamination or loss of sealing integrity.
The second important feature is compatibility with the CEDST82H-PRO model.When selecting the part with the code 540765, the customer receives a part designed for a specific Cedrus device, which simplifies servicing and eliminates the problem of accidentally selecting an incompatible replacement part.The third advantage is service life — As a sealing element, the O-ring operates under pressure, vibration, and varying loads, so its quality directly affects the reliability of the entire machine.
What is the 170x3.55 Cedrus 540765 O-ring, and why is it important for the rammer's operation??
O-ring is a ring-shaped seal with a circular cross-section, used in technical connections that require a tight seal.For the product O-ring 170x3.55 Cedrus 540765 , this is a replacement part designed for the Cedrus CEDST82H-PRO vibrating foot.This component acts as a sealing barrier between the mating parts of the device, limiting the ingress of contaminants and helping to maintain proper operating conditions for the mechanical assembly.
In practice, this means greater safety when operating the machine during soil compaction, preparing the subbase for paving stones, excavating, repairing road surfaces, or working in hard-to-reach areas.The vibrating foot operates dynamically, generating strong impacts and vibrations.Under these conditions, the seal must fit well, be resistant to deformation, and be installed correctly.A worn, cracked, or incorrectly selected O-ring can lead to leaks and, as a result, increased wear on mating components.
For the end user, the most important benefits are fewer outages, more reliable machine operation and easier maintenance to keep the equipment in good working order.Replacing this part during a maintenance check may be a minor expense compared to repairing damaged components, so the Cedrus 540765 O-ring should be considered an important part of preventive maintenance..
Where is the 170x3.55 Cedrus O-ring installed in the CEDST82H-PRO vibrating foot??
The 170x3.55 Cedrus O-ring is installed in the location specified by the design of the vibration foot CEDST82H-PRO, specifically in the sealing socket of the corresponding working unit or housing, where a leak-tight connection is required.The exact installation location should always be verified against the device’s service documentation or by comparing it to a removed component with the same catalog number 540765.
During installation, please pay attention to the following three points.First, cleanliness of the mounting surface — the O-ring seat should be free of sand, dust, old seal residue, and contaminants.Second, the correct positioning of the ring – The O-ring should not be twisted, overstretched, or cut during assembly.Third, dimensional compatibility – using a 170x3.55 mm ring with the correct part number helps prevent leakage issues.
In routine maintenance, such an O-ring is most often replaced when disassembling the assembly in which it serves as a seal, upon noticing signs of wear, during a periodic inspection, or after a leak is detected.This is particularly important for machines operating on construction sites, in excavations, and along roads, sidewalks, and driveways, where the equipment is constantly exposed to abrasive materials and contaminants.
Use of the Cedrus 540765 O-ring in construction, paving, and maintenance work
The 170x3.55 Cedrus 540765 O-ring is primarily used as a replacement part for a vibrating foot CEDST82H-PRO.Equipment of this type is used for soil compaction in areas where strong pressure, precision, and the ability to operate in confined spaces are essential.A compactor is useful, among other things, for preparing the subgrade for foundations, curbs, sidewalks, pavers, underground utilities, and surface repairs following earthwork.
Under these conditions, the O-ring ensures the system’s tightness, which ensures stable operation and reduces the risk of contamination of sensitive components.For example, when compacting the bedding material under paving stones, the machine operates in an environment filled with fine particles of sand and aggregate.A good gasket helps prevent them from getting into areas where they could cause accelerated wear.
This product is also ideal for construction companies, equipment rental firms, garden and construction machinery service centers, and individual users who maintain their own vibratory plates.Regular inspection and replacement of sealing components is a simple way to keep equipment ready for operation, minimize unplanned downtime, and maintain high compaction efficiency.
Genuine Cedrus Replacement Parts – Quality, Durability, and Reliability in Everyday Use
Choosing an original replacement part is particularly important for machines operating under heavy loads.Cedrus 540765 O-ring has been selected for the CEDST82H-PRO vibrating foot, making it a safe solution for users who expect compatibility with the device and predictable performance after installation.An original gasket helps maintain the equipment's operating parameters and reduces the risk of problems resulting from the use of a non-original part with similar but not identical dimensions.
Three features that are particularly important from the customer's perspective are precise dimensions, component protection , and service reliability.The precise dimensions of 170 x 3.55 mm make it easy to fit correctly.Protecting the components reduces the risk of contaminants entering the sealed area.Service Assurance means that a part can be selected by its part number 540765 and the EAN code 5906434259241, which simplifies ordering and reduces the risk of errors.
In everyday use, this means greater comfort for both the operator and the equipment owner.A machine that is ready for operation, with its consumable parts replaced, can perform tasks on the construction site more effectively.A well-maintained vibrating plate means fewer downtime periods, fewer unplanned repairs, and greater assurance that the machine will be ready when needed.
Technical Specifications: O-ring 170x3.55, Cedrus Vibrating Foot CEDST82H-PRO 540765
| Product name | O-ring 170x3.55 Cedrus vibrating foot CEDST82H-PRO 540765 |
| Product type | O-ring / ring gasket |
| Brand | Cedrus |
| Destination | Cedrus CEDST82H-PRO Vibratory Foot |
| Dimension | 170 x 3.55 mm |
| Part number / code | 540765 |
| EAN code | 5906434259241 |
| Type of part | Genuine Cedrus spare part |
| Sales Unit | 1 piece |
Why Choose the Cedrus 540765 O-Ring?
- Designed specifically for the CEDST82H-PRO model – makes it easier to select the correct parts for a specific Cedrus vibrating foot.
- Dimensions: 170 x 3.55 mm – ensures a proper fit in the designated mounting location.
- Genuine replacement part – a more reliable choice than a random replacement with unconfirmed compatibility.
- Seal Protection – helps protect components from dirt, moisture, and dust.
- A practical service tool – useful during inspections, repairs, and maintenance of the device.
- Reducing Downtime – Replacing a worn gasket can help prevent more serious operational problems.
FAQ - frequently asked questions
Does the Cedrus 540765 170x3.55 O-ring fit the CEDST82H-PRO vibrating foot??
Yes, this product is designed for the Cedrus CEDST82H-PRO vibrating foot and is identified by part number 540765.
What does the dimension 170x3.55 mean??
The dimension 170 x 3.55 mm specifies the size of the O-ring.This is a key factor in selecting a gasket, as it affects its fit and sealing effectiveness.
When Should You Replace the O-Ring in a Vibrating Foot??
The O-ring should be replaced if there are visible signs of wear, cracking, deformation, loss of elasticity, or leakage, or when disassembling the assembly in which the seal is installed.
Is this an original Cedrus replacement part??
Yes, the Cedrus 540765 O-ring is available as an original replacement part for Cedrus brand devices.
Can I install the O-ring myself??
Installation is possible provided that service guidelines are followed; however, it requires thorough cleaning of the socket, proper positioning of the gasket, and careful assembly of the components.If in doubt, it's best to have the replacement done by a service center.
What is the O-ring in a vibrating foot used for??
The O-ring is used to seal the connection between the device's components.It helps protect components from dust, dirt, and moisture, and supports the proper operation of the vibrating foot.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description