O-ring 105x5.7 Cedrus Vibrating Foot CEDST77H-PRO 540709
- The Cedrus 540709 105x5.7 O-ring for the CEDST77H-PRO vibrating foot is a durable seal that ensures a tight seal and reliable operation of the device. Genuine Cedrus Replacement Parts for Service and Maintenance.
Cedrus 105x5.7 O-ring (540709) for the CEDST77H-PRO vibrating foot – original replacement seal
O-ring 105x5.7 Cedrus CEDST77H-PRO vibrating foot 540709 is a precision-fit technical seal designed for use in the Cedrus CEDST77H-PRO vibrating foot.This is a functional component responsible for maintaining the tightness of the connection, ensuring the proper operation of subassemblies, and protecting the system against the uncontrolled ingress of contaminants, moisture, or the working medium into areas where stable sealing performance is required..
Product dimensions: 105x5.7 mm and product code 540709 has been designed as a replacement part for servicing, maintenance, and repair of the device.Because it is specifically designed to fit a particular machine model, it allows you to quickly restore the vibratory foot to proper operation, reduce the risk of breakdowns, and extend the service life of your equipment.
Cedrus 540709 105x5.7 O-ring for the CEDST77H-PRO vibrating foot This durable seal ensures a tight seal and reliable operation of the device.Genuine Cedrus Replacement Parts for Service and Maintenance.
Cedrus 105x5.7 O-ring for the CEDST77H-PRO model – precise fit, leak-tightness, and reliability
The most important advantage of this component is it fits the Cedrus CEDST77H-PRO vibrating foot perfectly.In practice, this means easier installation, a secure fit in the socket, and proper sealing of the work area.The 105x5.7 mm O-ring is designed for a specific application, which helps prevent problems typical of randomly selected seals, such as leaks, slipping out of the mounting groove, or premature wear.
The second important feature is maintaining a tight seal while the device is in operation.The vibrating foot operates under conditions involving loads, vibrations, and contact with dust, soil, and dirt.Under such conditions, a properly selected O-ring plays a very important protective role—it prevents the connection from losing its seal and ensures the mechanism operates correctly.
The third benefit is reliability in the everyday use of construction and gardening equipment.Replacing a worn gasket with the correct replacement part helps minimize the risk of downtime, which can be particularly disruptive during subgrade compaction, paving work, site preparation for paving stones, pavement repairs, or installation work.
What is the 105x5.7 Cedrus 540709 O-ring, and why is it important in a vibrating foot??
O-ring is a ring-shaped seal with a circular cross-section, used in machines and equipment to seal joints between components.For the product Cedrus 540709 , we are dealing with a gasket measuring 105x5.7 mm, designed for a specific service application in the CEDST77H-PRO.
The first key function of an O-ring is to ensure a tight seal.Even a minor leak can affect work comfort, component durability, and the safe operation of the device.An O-ring creates a flexible barrier between mating components, thereby helping to maintain proper operating conditions for the machine.
The second function is protection against dirt.Vibratory rammers are used in harsh environments—on construction sites, for earthwork, and for compacting aggregate, sand, or soil.The seal prevents dust and contaminants from entering areas that should remain protected.
The third function is supporting the device's long service life.Regular inspection and replacement of wear parts, such as O-rings, is a simple way to reduce the risk of costly repairs.In day-to-day maintenance, this part may seem insignificant, but it plays a very important role in the reliability of the entire device.
Where is the 105x5.7 Cedrus O-ring installed on the CEDST77H-PRO vibration foot??
O-ring 105x5.7 Cedrus 540709 Install in the appropriate sealing location on the Cedrus CEDST77H-PRO vibrating foot, in accordance with the unit’s design and service documentation.This component is designed for use in a joint that requires a tight seal, where the sealing ring operates between mating surfaces.
The first practical benefit of proper installation is restoring the factory-sealed tightness of the connection.If the old O-ring is brittle, deformed, cracked, or has lost its elasticity, the device may not operate at full capacity.The new gasket helps restore proper operating parameters.
The second benefit is better protection of components during intensive use.The vibrating foot generates vibrations and operates in contact with the ground, so the seal must be able to withstand the operating conditions well.A properly installed O-ring fits snugly against the surface and ensures trouble-free operation of the machine.
The third benefit is faster and more predictable service.Use the part with the correct code, namely 540709, makes it easier to identify the part and reduces the risk of errors when ordering.This is especially important for service providers, construction companies, equipment rental companies, and users who want to get their devices back up and running quickly.
Applications for the Cedrus 540709 O-ring – servicing, maintenance, and repair of the device
The Cedrus 105x5.7 O-ring is primarily used during servicing the CEDST77H-PRO vibrating foot.It is the right choice when the existing gasket shows signs of wear, has lost its elasticity, has been mechanically damaged, or needs to be replaced as part of routine equipment maintenance.
The first typical application is repairing a connection that has lost its seal.In day-to-day operations, this may mean shutting down the equipment, removing the worn part, and installing a new O-ring.This allows the equipment to resume work on soil compaction, subgrade preparation, paving with pavers, or performing installation work.
The second application is preventive maintenance.Replacing the gasket before a more serious failure occurs helps prevent unplanned downtime.This is particularly important during peak seasons, when any downtime can delay the completion of an order.
The third application is preparing the equipment for continued, safe operation.Regular replacement of small spare parts, such as O-rings, improves the equipment’s performance, reduces wear on other components, and increases the machine’s reliability in challenging off-road conditions.
Key benefits for the customer—genuine Cedrus parts, durability, and reliable selection
When choosing the 105x5.7 Cedrus O-ring for the CEDST77H-PRO 540709 vibrating foot, the customer receives a replacement part tailored to a specific device.This solution is designed for people who expect reliability, easy installation, and the assurance that the part they order meets the service requirements for their specific model.
The first advantage is that it was originally designed for Cedrus equipment.As a result, this product is ideal for repairing and maintaining the specified model of vibrating foot, without the need to take the risk of selecting random replacement parts.
The second advantage is durability under operating conditions.The seal operates in an environment subject to vibration, pressure, contamination, and varying operating conditions.The right O-ring helps maintain a tight seal and protects the connection from premature wear.
The third advantage is time and maintenance cost savings.A small component can play a major role in ensuring the continuous operation of a device.Replacing a worn O-ring is a much simpler and less expensive solution than repairing a failure caused by prolonged operation with a damaged seal.
Technical Specifications: O-ring 105x5.7, Cedrus CEDST77H-PRO Vibrating Foot 540709
| Product name | O-ring 105x5.7 Cedrus Vibrating Foot CEDST77H-PRO 540709 |
| Product type | O-ring, technical seal, replacement part |
| Brand | Cedrus |
| Dimension | 105 x 5.7 mm |
| Destination | Cedrus CEDST77H-PRO Vibratory Plate |
| Product code / system code | 540709 |
| EAN code | 5906434258985 |
| Application | Service, Maintenance, and Repair of a Vibrating Foot |
| Weight | No value specified |
Why You Should Replace a Worn O-Ring in a Cedrus Vibrating Foot?
A worn gasket can cause a loss of seal integrity, impair the device's performance, and lead to faster wear of adjacent components.Replacing the O-ring with the correct model Cedrus 540709 is a simple way to improve the reliability of your equipment and reduce the risk of more serious technical problems.
The first sign that an O-ring needs to be inspected may be visible deformation, flattening, or cracking of the old seal.Second—signs of a leak at the point where the component is installed.Third—periodic maintenance of the device, during which it is advisable to perform a preventive inspection of the seals and replace them if they no longer ensure a proper seal.
In practice, it’s a good idea to keep an O-ring on hand in your workshop, service center, or parts warehouse, especially if the vibrating foot is used regularly.It's a small component that can quickly get your equipment back up and running and prevent prolonged downtime.
FAQ - frequently asked questions
What is the 105x5.7 Cedrus 540709 O-ring??
This is a O-ring-type technical seal measuring 105 x 5.7 mm, designed for use in the Cedrus CEDST77H-PRO vibrating foot..This component ensures that the connection is airtight and that the device operates properly.
Which model does this O-ring fit??
The O-ring is designed for the Cedrus CEDST77H-PRO vibrating foot.The part number is 540709.
Where is the Cedrus 540709 O-ring installed??
Installation is performed at the sealing point of the vibrating foot, in accordance with the unit's design and service recommendations.The gasket should be installed in the appropriate sealing seat.
When Should You Replace the O-Ring in a Vibrating Foot??
Replacement is recommended if the gasket is cracked, brittle, deformed, flattened, or if there are signs of a leak.It's also a good idea to replace it as a preventive measure during routine maintenance of the device.
Is this an original Cedrus replacement part??
Yes, the product with part number 540709 is a Cedrus replacement part intended for the service and maintenance of the CEDST77H-PRO vibrating foot..
What is the EAN code of the product?
The product's EAN code is 5906434258985.
Why You Should Choose the Right O-Ring Instead of a Generic Gasket?
An O-ring designed for a specific model ensures a better fit, a more secure seal, and greater assurance of leak-tightness.Using the wrong gasket may result in leaks, accelerated wear, or installation problems.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description