6007-2Z Cedrus Bearing, CEDST77H-PRO Vibrating Foot 540660
- 6007-2Z Cedrus 540660 Bearing for the CEDST77H-PRO Vibrating Foot. A durable replacement part that ensures smooth operation, load-bearing capacity, and reliability of the equipment during soil compaction.
6007-2Z Cedrus Bearing for CEDST77H-PRO Vibrating Foot 540660 is a high-quality replacement part designed for use in demanding operating conditions.This component ensures proper rotational movement, reduces friction, and ensures stable operation of the mechanism in the Cedrus CEDST77H-PRO vibrating foot..Thanks to the use of a properly selected bearing, the device can operate more smoothly, more quietly, and with a lower risk of excessive wear on the associated components.
6007-2Z Cedrus 540660 Bearing for the CEDST77H-PRO Vibrating Foot.A durable replacement part that ensures smooth operation, load-bearing capacity, and reliability of the equipment during soil compaction.
This product is especially recommended as a replacement for worn-out or damaged bearings in equipment used for compacting soil, ballast, sand, gravel, and the subbase for paving stones.This is a practical choice for service providers, construction companies, pavers, and individual users who want to restore their vibrating foot to full working order without replacing the entire mechanism.
6007-2Z Cedrus 540660 Bearing for the CEDST77H-PRO Model – Precise Fit, Smooth Operation, and Effective Repair
The most important advantage of the bearing is its compatibility with the Cedrus CEDST77H-PRO vibrating foot.In practice, this means it's easier to select a replacement part, there's less risk of making a mistake when placing an order, and the device can be repaired more quickly.Product code 540660 and EAN code 5906434258749 make it easier to identify parts in documentation, in the warehouse, or when contacting customer service.
The second important feature is the smooth operation of the mechanism.The bearing reduces friction between rotating components, which is particularly important in machines subject to intense vibrations.In a vibratory rammer, which generates strong dynamic loads during operation, a properly functioning bearing ensures stable operation, minimizes unwanted play, and helps maintain consistent compaction efficiency.
The third benefit is effective and cost-efficient repair.Replacing a worn bearing can restore the equipment to its proper operating parameters, reduce noise, minimize vibrations transmitted to other components, and extend the service life of the entire working unit.This is particularly important in day-to-day use on a construction site, where equipment failure leads to downtime, delays, and additional costs.
What is the 6007-2Z Cedrus bearing for the CEDST77H-PRO vibration foot (540660)??
6007-2Z Bearing is a mechanical component designed to enable smooth, stable, and low-friction rotational movement.Designation 6007 refers to a common type of ball bearing, while the symbol 2Z indicates metal shields on both sides of the bearing.Covers help prevent larger contaminants from entering the bearing and support its operation in environments containing dust, particulates, and fine debris.
In the Cedrus CEDST77H-PRO vibrating foot, the bearing is part of the system responsible for transmitting motion and ensuring the operation of the vibration mechanism.During soil compaction, this component is exposed to loads, vibrations, and varying operating conditions; therefore, its technical condition directly affects the machine’s comfort of use and performance.
This product is effective as a service part when symptoms such as louder operation, noticeable play, uneven operation of the mechanism, increased temperature within the working unit, or reduced compaction efficiency occur..Replacing the bearing with the correct model restores the machine to proper operation and reduces the risk of further damage.
Where is the 6007-2Z Cedrus CEDST77H-PRO bearing installed??
The bearing is installed in the working assembly of the vibrating foot Cedrus CEDST77H-PRO, in the location designated by the device’s design for a bearing with the designation 6007-2Z.This part interacts with moving components, so its proper installation is critical to the machine's durability and operational safety.
In everyday use, a vibrating plate is used on construction sites, for compacting excavations, for preparing the subgrade for pavement, around foundations, for sewer, water, and electrical installations, as well as during paving work.In each of these applications, the bearing must withstand intense vibrations and the load resulting from the operation of the impact mechanism.
During installation, it is important to check that the housing is clean, that the mating parts are in good condition, and that the bearing is properly seated.Improper installation, misalignment, or installation in a contaminated area may shorten the service life of the part.For best results, we recommend replacing the part according to the device's service manual or having it repaired by a qualified service provider..
Applications of the Cedrus 6007-2Z Bearing – Construction, Paving, and Maintenance of Compaction Equipment
The bearing is primarily used as a a replacement part for the Cedrus CEDST77H-PRO vibrating foot.This machine is used in situations where effective compaction of the subgrade is needed in hard-to-reach areas, on small surfaces, or for work requiring precision.A properly functioning bearing ensures stable operation of the machine when compacting soil in trenches, along curbs, at foundations, along fences, or around underground utilities.
In the paving industry, this element is important when preparing the subbase for pavers, sidewalk slabs, and garden paths.Uneven or unstable operation of the vibrating plate can make it difficult to achieve uniform compaction; therefore, replacing a worn bearing helps maintain proper performance.For the contractor, this means fewer revisions, more efficient project execution, and greater confidence in the final result.
This product is also a good choice for service centers and companies that maintain their own machinery fleet.Having the right bearing in stock allows you to respond more quickly to breakdowns and minimize equipment downtime.This is particularly important during the construction season, when every hour of downtime can affect the timely completion of the work.
Durability and Load Capacity – Why You Should Choose the 6007-2Z Bearing?
The 6007-2Z bearing is designed for rotational motion and the loads encountered in machine mechanisms.Three characteristics are particularly important in a vibrating foot: vibration resistance, tracking stability , and protection against contamination.Metal guards on both sides help limit the ingress of dust and debris, which are a natural hazard to moving parts in construction environments.
The bearing's durability reduces the risk of sudden failure during operation.In practice, this means greater safety for the operator, more predictable machine behavior, and better control over the compaction process.A properly selected part also helps reduce wear on mating components, as it reduces friction and prevents excessive play.
The benefit for the customer is not only the replacement of the damaged part itself, but also the restoration of the device's functionality.This is a cost-effective solution because it extends the service life of the Cedrus CEDST77H-PRO vibrating foot and helps avoid costly replacements of major components if the problem is detected and resolved early enough.
Technical and product identification data
| Product name | 6007-2Z Cedrus Bearing, CEDST77H-PRO Vibrating Foot 540660 |
| Part Type | Ball bearing / replacement part |
| Bearing Designation | 6007-2Z |
| Covers | 2Z – metal covers on both sides |
| Purpose | Cedrus CEDST77H-PRO Vibratory Plate |
| Brand | Cedrus / Cedrus Parts |
| Product code / symbol | 540660 |
| EAN Code | 5906434258749 |
| Typical dimensions for designation 6007 | Inner diameter 35 mm, outer diameter 62 mm, width 14 mm |
| Weight | No data available |
Before making a purchase, it's a good idea to compare the old bearing's designation, part number, and device model.Selecting the right component is crucial for the proper operation of a vibrating foot, as even a slight difference in dimensions or design can affect installation, service life, and safety during use.
Benefits for the user – less downtime, greater reliability, and a longer service life for the equipment
By choosing the 6007-2Z Cedrus 540660 bearing, you’re investing in the performance of a machine that often operates in harsh and dusty conditions.It is a small component, but it plays a very important role: it reduces friction, ensures smooth operation, and ensures proper transmission of motion within the mechanism.This allows the operator to use the machine in a more comfortable and predictable way.
In day-to-day construction work, reliability is what counts.A vibratory plate used for soil compaction must operate evenly, because the durability of the subsequent pavement or structure depends on the quality of the compaction.A properly functioning bearing helps maintain the machine's optimal performance, which results in more precise task execution and a lower risk of unevenness.
It's also a cost-effective solution.Regular inspection and replacement of worn-out parts helps prevent more serious breakdowns.Instead of causing damage to other components, you can replace the bearing at the right time and continue to use the machine to its full potential.
FAQ - frequently asked questions
Which device is the 6007-2Z Cedrus 540660 bearing compatible with??
This bearing is designed for a vibrating foot Cedrus CEDST77H-PRO.Before purchasing, we recommend comparing part number 540660 and bearing designation 6007-2Z with the equipment documentation or the old part..
What does the symbol 6007-2Z mean??
The designation 6007 specifies the type and standard dimensions of the bearing, while the 2Z designation indicates that metal shields are used on both sides.The covers help protect the interior of the bearing from larger contaminants.
Where is this bearing installed??
The bearing is installed in the working assembly of the Cedrus CEDST77H-PRO vibrating foot, in the location designated for the component designated 6007-2Z.It is part of a system that works in conjunction with the mechanism responsible for the device's vibration function.
When Should the Bearing in a Vibrating Foot Be Replaced??
Replacement may be necessary if the unit is operating more noisily than usual, if there is play, uneven operation, excessive heating, or a decrease in compaction efficiency.In such situations, it is a good idea to inspect the condition of the bearing and its mating parts.
Is the 6007-2Z bearing suitable for use in a dusty environment??
2Z metal shields help prevent contaminants from entering the bearing, which is important when working on a construction site.However, it is important to remember that the service life of the parts also depends on proper installation, the condition of the socket, and operating conditions.
What are the typical dimensions of a 6007 bearing??
For part number 6007, the typical dimensions are: inner diameter 35 mm, outer diameter 62 mm, and width 14 mm.Before installation, it is a good idea to verify compatibility with the old bearing and the requirements of the specific device.
Can I replace this bearing myself??
Replacement is possible with the proper technical preparation and the right tools.If you have no experience repairing compaction machines, it is safer to have a service technician perform the installation to avoid damaging the bearing or bearing housing..
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description