Loncin LC192F-A Control Arm - ORIGINAL PART 171630003-0001
- Loncin LC192F-A Throttle Arm – Genuine Replacement Part 171630003-0001 for Loncin Engines. Ensures precise operation of the speed controller, durability, and a perfect fit. EAN 5906434276347.
Loncin LC192F-A Throttle Lever 171630003-0001 – Genuine part for precise engine speed control
Loncin LC192F-A Governor Arm ORIGINAL PART 171630003-0001 is a high-quality component of the engine speed control system, designed to work with the governor mechanism in Loncin engines.This product ensures proper power transmission and adjustment of the control mechanism, allowing the motor to maintain a stable operating speed under varying loads.
This is an original Loncin replacement part, which means it is properly matched to the engine’s design, ensures correct operating geometry, and provides the durability required for combustion-engine equipment used in the garden, on the farm, in the workshop, or for technical work.The part number is 171630003-0001, and the product's EAN code is 5906434276347.
Choosing an original controller arm helps reduce the risk of motor malfunction, speed fluctuations, delayed response to load changes, or problems maintaining a stable operating speed.It is a small but very important component that affects ease of use, operational safety, and the service life of the entire drive system.
Genuine Loncin LC192F-A control arm – secure fit, stable operation, and durability
The biggest advantage of this product is its original design.The Loncin LC192F-A governor arm is designed as a replacement part tailored to a specific engine model, ensuring compatibility during installation and proper operation with the other components of the speed control system.In practice, this means fewer problems during repairs, easier installation, and greater assurance that, once replaced, the engine will operate as intended by the manufacturer.
The second important feature is precise operation.The regulator arm is part of the mechanism responsible for controlling the speed.When an internal combustion engine is subjected to a heavier load—for example, while mowing thick grass, operating a tiller, compacting the ground, or powering other attachments—the control system should respond quickly and maintain stable operation of the unit.A properly functioning throttle arm helps maintain smooth engine operation.
The third benefit is operational durability.The component operates in an environment subject to vibrations, temperature fluctuations, contamination, and mechanical stress.This genuine Loncin part was designed to operate in such conditions, making it a good choice for both service repairs and preventive replacement of worn components.
What is the Loncin LC192F-A 171630003-0001 control arm, and what is its function??
Regulator arm is a mechanical component that works in conjunction with the engine speed regulator.Its function is to transmit motion and settings between the control mechanism and the other components that control the unit's operation.This allows the motor to maintain the set speed regardless of momentary changes in load.
In everyday use, this means that a device with a Loncin engine can operate more smoothly.For example, when the mower encounters taller or wetter grass, the engine requires a stable response from the control system.Similarly, in work equipment such as power units, gardening machines, or equipment powered by an internal combustion engine, proper speed control helps maintain efficiency and reduce overloads.
A worn, bent, jammed, or improperly selected throttle linkage can cause uneven engine operation, problems with throttle response, a loss of power under load, or difficulty maintaining the correct RPM.Replacement with an original part Loncin 171630003-0001 restores the correct operating geometry of the mechanism and increases the reliability of the repaired engine.
Where is the control arm of the Loncin LC192F-A mounted??
The regulator arm is mounted within the Loncin LC192F-A engine speed control system.It is a component that operates within the rotation control mechanism, usually in conjunction with levers, cables, springs, or other elements of the control system.The exact installation location depends on the design of the specific engine model and the device being used.
This part is used when repairing engines in which the speed control system has stopped functioning properly or requires replacement of a damaged component.Installation should be performed carefully, ensuring that the arm is properly aligned, as incorrect positioning can affect the engine's RPM, response, and operational safety.
In practice, a regulator arm may be needed when servicing combustion-engine equipment that is used seasonally and intensively, such as lawn mowers, gardening equipment, work machines, or technical equipment powered by a Loncin engine.This is a part that should be selected based on the catalog number 171630003-0001to ensure that the part you’re ordering matches the reference you’re looking for.
Use in Loncin engines – precise speed control under load
This product is intended for use in engines Loncin LC192F-A as part of the speed control system.It is ideal for repairs, maintenance, and the replacement of wear parts in equipment equipped with a Loncin engine.Thanks to compatibility with the part number 171630003-0001 , it is easier to identify the correct subassembly and avoid mistakes when ordering.
The governor arm is important in any situation where the engine must maintain a stable speed despite varying loads.When mowing, working on uneven terrain, powering attachments, or performing long-term tasks, the control system should operate without delay.A properly functioning component helps ensure smooth operation, reduces the risk of jerking, and promotes even power delivery.
It's a good choice for private users, service centers, mechanics, and companies that repair combustion-engine equipment.An original part allows you to perform repairs in accordance with the manufacturer's specifications, which is particularly important for equipment that operates regularly and under heavy loads.
Benefits for the user: reliability, safety, and a lower risk of failure
When selecting the Loncin LC192F-A regulator arm (ORIGINAL PART 171630003-0001), you’re getting a component that supports proper engine operation and helps maintain its optimal performance parameters.The original fit reduces the risk of play, collisions with other components, and malfunction of the rotation control system.
For users, this means greater peace of mind in their daily work.The motor can respond better to changes in load, and the device behaves more predictably.This is important both for occasional use in the garden and for heavy-duty use at a service center, farm, or service company.
A durable and properly selected replacement part also helps reduce the cost of future repairs.Instead of using a random replacement part with uncertain dimensions, it’s best to choose a genuine Loncin part that’s designed to work with a specific engine model.It's an investment in stability, performance, and a longer service life for the equipment.
Technical Specifications and Product Identification
| Product name | Loncin LC192F-A Control Arm - ORIGINAL PART 171630003-0001 |
| Part Type | Speed control lever |
| Brand | Loncin |
| Model / Application | Loncin LC192F-A |
| Catalog number | 171630003-0001 |
| EAN code | 5906434276347 |
| Product type | Original spare part |
| Function | Interaction with the engine speed control mechanism |
| Weight | No data available |
When Should You Replace the Throttle Arm on a Loncin Engine??
It may be necessary to replace the regulator arm if the part is mechanically damaged, worn out, deformed, corroded, or does not operate smoothly.Symptoms of problems with the control system may include unstable RPM, rough engine operation, difficulty setting the operating speed, a loss of power under load, or a delayed response to changes in operating conditions.
It's also a good idea to check this component after the device has been in use for an extended period or following a malfunction related to the control system.In seasonal machines that remain unused for several months, the adjustment mechanisms may become dirty or seized.The original regulator arm allows you to restore proper system operation and improve the engine's reliability the next time it is started.
Before purchasing, we recommend comparing the part number 171630003-0001, the engine model, and the appearance of the part with the old part.This ensures that the selected product will be compatible with the device in question.
Why You Should Choose a Genuine Loncin Part Instead of a Generic Replacement?
Genuine replacement parts are designed with the specifications of a specific engine in mind.For a regulator arm, the length, shape, profile, location of the points of interaction, and load-bearing capacity are important.Even a slight difference in geometry can affect the operation of the speed control system.
When you choose a genuine Loncin control lever, you’re getting a product designed for a specific application.This is particularly important for devices that must operate reliably during heavy use.A properly selected part helps maintain optimal engine performance, reduces the risk of unplanned downtime, and facilitates a professional repair..
An original part also means greater comfort for the service technician.Installation goes more smoothly, the part fits better into the existing system, and it's easier to get the correct adjustment after the repair.This allows the device to resume operation more quickly, giving the user greater peace of mind.
FAQ - frequently asked questions
1.What is the Loncin LC192F-A 171630003-0001 control arm??
This is an original replacement part for the Loncin LC192F-A engine speed control system..This component works with the control mechanism to help maintain stable engine operation under varying loads.
2.Where this part is assembled?
The arm is installed in the Loncin LC192F-A engine speed control system, in the location specified by the engine design.It works in conjunction with rotation control elements such as levers, cables, or regulator springs.
3.Which motor is the 171630003-0001 controller arm compatible with??
This product is designed for the Loncin LC192F-A engine.Before purchasing, it's a good idea to compare the part number 171630003-0001 and the appearance of the part with the component removed from the device.
4.Is it an original part?
Yes, the product is described as an original Loncin replacement part, designed to work properly with the engine speed control system.
5.What are the symptoms of damage to the regulator arm??
Possible symptoms include fluctuating RPM, rough engine operation, difficulty maintaining a constant operating speed, poor response to load, or problems with the RPM control system.
6.Will replacing the regulator arm improve the engine's performance??
If the problems are caused by a damaged, worn, or malfunctioning throttle body, replacing it with an original part may help restore stable and proper operation of the engine speed control system.
7.What is the EAN code of the product?
The product's EAN code is 5906434276347.
8.What is the part number for this part??
The part number is 171630003-0001.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description