Loncin LC192F-A Cylinder Head Gasket - ORIGINAL PART 120150249-0001
- Genuine Loncin LC192F-A Cylinder Head Gasket 120150249-0001. A high-quality replacement part that ensures a tight seal, durability, and proper engine operation. Perfect for repairs and maintenance of Loncin equipment.
Loncin LC192F-A Cylinder Head Gasket 120150249-0001 – Genuine Part for Leak-Free and Reliable Engine Operation
Loncin LC192F-A Cylinder Head Gasket - GENUINE PART 120150249-0001 is a high-quality sealing component designed for installation between the cylinder head and the cylinder of the Loncin LC192F-A engine.Its main function is to ensure that the combustion chamber is properly sealed, to separate the oil and cooling passages, and to maintain proper compression during operation of the engine.
Genuine Loncin LC192F-A Cylinder Head Gasket 120150249-0001.A high-quality replacement part that ensures a tight seal, durability, and proper engine operation.Perfect for repairs and maintenance of Loncin equipment.
This product is chosen by users who expect a reliable fit, durability, and safe engine operation after repairs.Original Part Number 120150249-0001 makes it easier to identify the part and helps reduce the risk of purchasing an incompatible replacement.This gasket is suitable for both professional service and DIY repairs performed by experienced users of equipment with Loncin engines.
Genuine Loncin LC192F-A Cylinder Head Gasket – a secure fit, leak-proof performance, and durability
The most important feature of this gasket is its original design, which meets the requirements of the Loncin LC192F-A engine.As a result, the component is designed to operate under conditions typical of internal combustion engines, where high temperatures, pressure, and variable loads are present.In practice, this means that the unit will operate reliably after the gasket is replaced, and there is greater assurance that the repair will be done correctly.
The second important feature is the effective sealing of the connection between the cylinder head and the cylinder.The cylinder head gasket is responsible for maintaining proper compression in the combustion chamber.If this component is worn out, damaged, or incorrectly selected, the engine may lose power, run rough, have trouble starting, or exhibit signs of backfiring.Using the correct gasket restores the engine to its proper operating parameters.
The third feature is durability in everyday use.The gasket is a small component, but one that is very important for the service life of the entire drive unit.It is ideal for repairing equipment that is used seasonally and intensively, such as gardening equipment, construction machinery, municipal vehicles, or other vehicles equipped with a compatible Loncin LC192F-A engine.
Where is the Loncin 120150249-0001 cylinder head gasket installed??
The Loncin LC192F-A 120150249-0001 cylinder head gasket is installed between the cylinder and the cylinder head.This is an area particularly exposed to the high temperatures and pressures generated during the combustion of the fuel-air mixture.Proper installation of the gasket directly affects compression, sealing, and smooth engine operation.
The first benefit of proper installation is maintaining proper compression.A properly selected gasket helps maintain the pressure needed for efficient combustion.This makes it easier for the engine to start, reach the desired power output, and run more smoothly under load.
The second benefit is protection against exhaust backdrafts.A worn or damaged cylinder head gasket can cause leaks that affect engine performance and may lead to further malfunctions.The original Loncin gasket reduces the risk of such problems, especially after the cylinder head has been removed during a repair or inspection.
The third advantage is the safe separation of the engine's operating zones.The gasket ensures that the channels and working surfaces are properly sealed, which is important for the reliability of the entire unit.In everyday use, this translates to greater operational comfort, a lower risk of unplanned downtime, and the assurance that a part specifically designed for that model has been used.
Use of the Loncin LC192F-A Cylinder Head Gasket in Equipment Maintenance and Repair
The Loncin LC192F-A cylinder head gasket is designed for use during engine repairs, inspections, and overhauls that require removing the cylinder head or replacing a worn gasket.This is a part that should not be overlooked during maintenance, because reusing the old gasket can lead to leaks and the need to disassemble the unit again.
The first typical application is replacing the gasket after removing the cylinder head.If the engine has been disassembled to inspect the valves, clean the combustion chamber, remove carbon deposits, or perform a major overhaul, installing a new gasket is standard service practice.This ensures a proper seal after the engine is reassembled.
The second application is repairing signs of gasket wear.Such symptoms may include a loss of power, rough idling, difficulty starting, reduced compression, or signs of a leak around the cylinder head-to-cylinder joint.Replacing the gasket with an original Loncin part can be an important step in restoring the device to full working order.
The third application is preventive maintenance of equipment operating under load.Engines used in garden, industrial, work, or seasonal machinery often operate for extended periods under demanding conditions.A high-quality cylinder head gasket helps reduce the risk of downtime, which can be particularly disruptive during periods of heavy equipment use.
Why Choose the Genuine Loncin Part 120150249-0001?
Choosing a genuine Loncin part is a decision that ensures a proper fit.For components such as a cylinder head gasket, it is not only the overall shape that matters, but also the precision of the holes, the correct thickness, the material's durability, and compatibility with the engine's working surfaces.Even a slight difference can affect the tightness and durability of the repair.
The first advantage of the original is its compatibility with the LC192F-A model.Catalog Number 120150249-0001 makes it easier to match the part with the technical documentation or an old gasket.This is particularly important in maintenance operations, where quickly identifying a component and minimizing assembly errors are key.
The second advantage is greater confidence in the quality of workmanship.The original gasket was designed as a replacement part for a specific design, which is why it works well in repairs where durability and predictable performance are essential.For the customer, this means fewer problems after installation and a better chance of long, trouble-free engine operation.
The third advantage is the cost-effectiveness of the repair.Although a gasket is a small component, its failure can have serious consequences for the engine.Using the correct part during service helps avoid having to disassemble the unit again, incurring additional labor costs, and causing unnecessary equipment downtime.
Technical and product identification data
| Product name | Loncin LC192F-A Cylinder Head Gasket - ORIGINAL PART 120150249-0001 |
| Part Type | Engine cylinder head gasket |
| Brand | Loncin |
| Engine model | LC192F-A |
| Part Number / External System Code | 120150249-0001 |
| EAN | 5906434276149 |
| Installation location | Between the cylinder head and the engine cylinder |
| Purpose | Repair, maintenance, and replacement of the cylinder head gasket in compatible Loncin LC192F-A engines |
| Part Type | Original part |
Before purchasing, it's a good idea to compare the part number 120150249-0001, engine model LC192F-A , and the appearance of the gasket with the old part.This ensures that the product is suitable for the specific engine version and the planned repair.
Benefits for the user – reliable repairs, stable operation, and engine protection
What matters most to the customer is the assurance that the engine will work properly after the repair is completed.The Loncin LC192F-A cylinder head gasket (part number 120150249-0001) supports this goal by providing a precise seal for a critical connection in the powertrain.This component helps restore proper engine operating conditions and reduce the risk of another failure.
The first practical benefit is smoother startup and more stable operation, provided that the previous problems were caused by a cylinder head leak.In equipment used seasonally—for example, after a long period of inactivity—proper compression is crucial for smooth startup and operational efficiency.
The second benefit is protection against further damage.A leaky gasket can negatively affect engine performance, cause a drop in performance, and increase the risk of more serious repairs.Replacing it with a properly selected part helps protect the unit from the consequences of operating under improper conditions.
The third benefit is time and cost savings.An original part designed specifically for the LC192F-A model reduces the risk of installation problems and minimizes the likelihood of having to remove it again.This is especially important for service providers, companies, and users who need to get their equipment back up and running quickly.
FAQ – Frequently Asked Questions About the Loncin LC192F-A 120150249-0001 Cylinder Head Gasket
What is the Loncin LC192F-A 120150249-0001 cylinder head gasket??
This is the original cylinder head gasket designed for the Loncin LC192F-A engine.It is installed between the cylinder head and the cylinder to ensure the combustion chamber is airtight and the engine operates properly.
Where is this gasket installed??
The gasket is installed at the joint between the cylinder and the cylinder head.This is a location that requires a very tight seal due to the high pressure and temperature generated during the operation of the power unit.
When Should the Cylinder Head Gasket Be Replaced??
Replacement is recommended after removing the cylinder head, during an engine overhaul, or if there are signs of a leak, such as a drop in compression, rough idling, difficulty starting, or visible signs of blow-by around the cylinder head.
Is it an original part?
Yes, the product is described as a genuine Loncin part with the number 120150249-0001, intended for use in a compatible LC192F-A engine.
How to check if a gasket will fit?
It's best to compare the part number 120150249-0001, engine model LC192F-A, and the EAN code 5906434276149 and a photo of the gasket’s shape with the old part or the device’s technical documentation.
Can the old gasket be reused??
When repairing the engine, it is recommended to use a new gasket.Once removed, the old gasket may not provide a proper seal, which could lead to a loss of compression and recurring engine problems.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
Warranty terms and conditions
1. The guarantee is granted by Cedrus Joint Stock Company for the period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases. Warranty
covers goods/equipment purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims related to damage
goods/equipment and claims for lost profits or incurred costs resulting from damage to the goods/equipment.
2. For the extended warranty of some manufacturers over 24 months annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Cedrus C-TRAC, Cedrus zero-turn C-TRAC, Simplicity 36 months,
- power tools 36 months,
- loncin brand engines and equipment sold by frma Cedrus 36 months,
- rato brand motors and equipment sold by frma Cedrus 36 months,
- cedrus brand aggregates 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, blades covered
are guaranteed for 90 days. the 2-belt drive train used on the IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 is warranted for 36 months or 300 hours
(warranty covers in the first year parts and labor, in the second and third year only parts). Coilover shock absorbers and all suspension related components are covered under warranty
60 months with no limit on the number of hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: the Trekker series 72 months (annotated in the Wiper service application),
- c-MOW automatic mowers, Sunseeker X 36 months,
- jonco D16, R13 shredders 36 months commercial purchase, 60 months consumer purchase.
3. In the case of equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer), gearboxes and paint finish is 24 months consumer purchase or
12 months in other cases.
4. Warranty repair is understood as activities of a specialized nature, appropriate for the removal of a physical defect covered by the warranty .
5. Warranty is not covered:
a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, augers, grinding wheels, component holders),
- cables: starter, drive, brake, adjustment cables,
- rubber parts (covers, shock absorbers, control orings),
- drive components (clutch drums, couplings, drive wheels, chains, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- air , oil, fuel, water, hydraulic fluid filters,
- spark plugs, ignition wires, springs, shock absorbers, bearings, pan, diaphragms, nozzles and carburetor valves,
- electrical, fuel lines, injectors, brushes, brushstops, fuses, light bulbs, manual and electric starters, safety bolts, chocks.
b) damages resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
c) damage caused by the use of fuel, low-quality mixtures.
d) damage to machinery and parts resulting from repairs outside the service network of Cedrus Joint Stock Company.
e) mechanical, thermal, chemical, corrosive and any other damage caused by an act or omission by the User.
f) damages resulting from natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, installation, use, lack of care for the equipment (use of non-original spare parts and accessories),
- transportation.
i) damage caused by the use of parts, accessories or the cutting system other than original parts.
j) intentional damage to equipment.
k) maintenance activities, cleaning, service inspections, adjustments, installation, operation, replacement of consumables.
l) damage caused by lightning, random events, accidents or natural disasters.
6. Batteries in power tools are guaranteed for a period of 6 months. Warranty for other batteries is 24 months consumer purchase or 12 months in other
cases.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that the removal of the defect is impossible or
economically unjustified.
10. The complainant should deliver the goods/device to the Authorized Service Center. The claimed goods/equipment should be complete and in the condition they were in at the time of the
damages. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the complaint within the period of time 14 days from the date of delivery of the goods/equipment by the Complainant. In the case of recognition, the Authorized
The service is obliged to perform its duties within the time limit of 30 days.
12. The warranty card must be properly filled out. The rights under the guarantee may be exercised only upon presentation by the User important
warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a guarantee for rechargeable devices the serial numbers of all components must be written in the warranty card set.
14. Goods, equipment and engines purchased for rental or hire are warranted for a period of 6 months.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and according to the fault description