NOZZLE WITH 4 HOLES (FULL CONE) OTH-GSP8740
- Nozzle with 4 holes (full cone) OTH-GSP8740 for Pulmic and Keeper sprayers. Creates a fine, even mist, ideal for spraying plants, orchards, greenhouses and disinfection.
Nozzle with 4 holes (full cone) OTH-GSP8740 is a specialized spray tip designed for modern pressure sprayers. Used in it four liquid outputs form overlapping streams that form a unique full cone spray mist. This makes spraying extremely uniform, effective and precise, even in the most demanding applications.
The nozzle is especially recommended for Pulmic and Keeper brand sprayers, proving itself both in professional cultivation and in home gardens, plant nurseries, orchards or greenhouses. It is an ideal choice for users who value high quality, repeatable effects and equipment reliability.
Nozzle with 4 holes OTH-GSP8740 - what it is and how the full cone works?
Nozzle with 4 holes (full cone) OTH-GSP8740 is a precision work piece mounted on a lance or sprayer tip. Its design is based on four specially designed outlet holes, through which the applied liquid - a solution of plant protection products, foliar fertilizers or disinfectants - flows out in the form of several small, overlapping streams.
The individual streams have been shaped so that they they overlap and form a single, coherent, full cone very fine drops. This design of the nozzle makes it possible to obtain:
- even coverage of the leaf surface and other sprayed elements,
- high efficiency of chemical agents thanks to better adhesion of liquid particles,
- controlled droplet size, reducing the flow of liquid from the surface and increasing the effectiveness of the treatment.
In practice, this means that every spray performed with the OTH-GSP8740 nozzle is accurate, repeatable and economical. It works especially well where a fine, enveloping mist is required for the plants, rather than a strong, pinpoint spray.
Examples of daily use:
- routine protective spraying of garden plants against fungal diseases,
- application of foliar fertilizers in orchards and home fruit seedlings,
- thoroughly covering the underside of the leaves of ornamental plants in the greenhouse.
Where the nozzle with 4 holes (full cone) OTH-GSP8740 is mounted?
The OTH-GSP8740 nozzle is designed for easy and quick installation in popular pressure sprayers. It is recommended for Pulmic and Keeper brand sprayers, in which it is an ideal complement to the factory-supplied lance and nozzle sets.
The standard connector design allows:
- hassle-free screwing or snapping of the nozzle in the lance socket,
- quick replacement as needed (e.g., changing spray type during operation),
- tight connection, minimizing the risk of leakage and loss of working fluid.
Depending on the model of the sprayer, the nozzle can be mounted:
- on straight lance - When larger horizontal or vertical areas are sprayed,
- on broken lance or telescopic - when spraying tall trees and shrubs,
- w systems with several nozzles - When it is necessary to cover a wider lane in a single pass.
In practice, the user of a Pulmic or Keeper sprayer can install the OTH-GSP8740 nozzle by himself, without specialized tools - just unscrew the existing tip and replace it with a new full-cone nozzle.
Examples of installation locations and applications:
- the lance of a backpack sprayer used to protect a vegetable garden,
- the lance of a battery-powered sprayer used in an apple orchard,
- mobile spray kit in the greenhouse with ornamental plants, where precision and gentleness of spraying counts.
Full cone - even coverage and maximum spray efficiency
A unique feature of the OTH-GSP8740 nozzle is the formation of a a full spray cone. Unlike slotted or flat jet nozzles, the full cone provides a an enveloping, three-dimensional cloud of fine droplets, which reaches hard-to-reach places.
Benefits of using a full cone:
- thorough coverage of leaves on all sides - The mist penetrates between the shoots, reaching the undersides of the plants,
- less risk of unsprayed areas - especially important in protecting against diseases and pests,
- better fluid adhesion - fine droplets run off more slowly, so more of the active ingredient remains on the plant.
This solution is very useful in specific applications, where conventional nozzles do not give satisfactory results, such as in crops with dense foliage, in fruit bushes, on climbing plants or hedges.
Examples of the use of the full cone:
- protection of vines and currants, where it is important to reach the undersides of the leaves,
- spraying potted plants set densely in a greenhouse or plastic tunnel,
- protective treatments on hedges and dense ornamental shrubs in private gardens and urban green spaces.
Professional use of OTH-GSP8740 nozzle in Pulmic and Keeper sprayers
The 4-hole nozzle (full cone) OTH-GSP8740 is recommended for Pulmic and Keeper brand sprayers, which are renowned for their high quality, ergonomics and durability. In combination with these devices, it forms a a complete, professional spraying kit in different working environments.
Possible applications for working with Pulmic and Keeper sprayers:
- agriculture and horticulture - Spraying fruit trees, berry bushes, vegetable plantations,
- amateur and professional gardening - Care of private gardens, greenhouses, plastic tunnels,
- urban green areas - Maintenance of ornamental plants in parks, squares, flowerbeds and hedges,
- disinfection and sanitary applications - Gentle spray of disinfectants on hard-to-reach surfaces.
In each of these areas, the user gets controlled, even spraying, which translates into:
- reduced use of chemicals,
- better effectiveness of the treatments,
- saving time and work.
The main advantages of the nozzle with 4 holes (full cone) OTH-GSP8740
- Four liquid outputs - provide an even, full cone of spray.
- Specially shaped streams - overlap to form a uniform cloud of atomized liquid.
- High efficiency - Excellent coverage of the plant surface with optimal use of chemicals.
- Destination for special tasks - Ideal for specific applications where gentle yet thorough spraying is required.
- Compatible with Pulmic and Keeper sprayers - easy installation and secure fit.
- Easy to use - quick replacement, easy cleaning and maintenance.
Data and performance characteristics of the OTH-GSP8740 nozzle
The following collects the most important usage and operating information about the 4-hole nozzle (full cone) OTH-GSP8740:
- Nozzle type: full cone (full cone) with four outlet holes,
- Number of liquid outputs: 4, forming overlapping streams,
- Purpose: handheld, cordless and backpack sprayers,
- Recommended sprayer brands: Pulmic, Keeper,
- Spray type: a fine mist with an even distribution over the entire surface of the cone,
- Typical working medium: plant protection products, foliar fertilizers, disinfectant preparations (as recommended by the manufacturer of the products),
- Design: durable, suitable for use in horticultural and agricultural conditions.
Exact flow parameters (capacity, cone angle, operating pressure) depend on the specific sprayer and pressure settings and may be specified in the equipment manual. The nozzle is designed to provide an optimal compromise between droplet fineness and spray coverage in typical horticultural and agricultural applications.
FAQ - frequently asked questions about the 4-hole nozzle (full cone) OTH-GSP8740
1. To which sprayers the OTH-GSP8740 nozzle fits?
The nozzle is recommended primarily for Pulmic and Keeper brand sprayers. On many of these manufacturers' models, mounting is done directly on the lance or working tip. For other brands, check the compatibility of the thread and type of connector with your device.
2. What is the difference between a full cone nozzle and a regular slotted nozzle?
A full cone nozzle, such as the OTH-GSP8740, creates a three-dimensional, full cone of atomized liquid, which ensures very even surface coverage. Slotted (flat jet) nozzles generate a flattened fan of liquid and are more directional. Full cone works better for spraying dense plants and hard-to-reach areas.
3. What agents can I use this nozzle for?
The nozzle can be used with most crop protection products, foliar fertilizers and disinfectants, unless the manufacturer of the agent in question stipulates a different type of tip. It is important to follow the recommendations for the concentration, working pressure and conditions of the treatments.
4. Is the nozzle suitable for fine spraying in the home garden?
Yes. With its fine mist and full spray cone, the OTH-GSP8740 nozzle is ideal for everyday use in the garden - Plant protection against diseases, foliar fertilizer application or ornamental plant care.
5. How to take care of a 4-hole nozzle to make it last as long as possible?
After the work is completed, it is recommended flush the system with clean water and possible gentle cleaning of the holes with a soft brush or a special nozzle needle (without using sharp objects that could damage the holes). Regular cleaning prevents clogging and loss of spray quality.
6. Can I replace the nozzle on the sprayer myself?
Yes. On most sprayers, nozzle replacement is simple and does not require specialized tools. Simply unscrew or detach the old tip, then install the OTH-GSP8740 nozzle in its place, making sure that the connection is tight and stable.
7. Is the nozzle suitable for indoor spraying (e.g., in a greenhouse)?
Yes, the gentle, full cone of spray makes the nozzle works well in greenhouses, plastic tunnels and other enclosed spaces, where uniform plant coverage and control of spread are required.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.