24W UV LAMP BULB FOR BIOFORCE 1502 FILTERS OO-SPAHOZ1502
- UV lamp bulb 24W for Bioforce 1502 filters OO-SPAHOZ1502 (Bioforce Revolution 18000 UVC) effectively eliminates algae, bacteria and microorganisms, providing crystal clear water in ponds, ornamental ponds and fish tanks. Ideal d
24W UV LAMPS FOR BIOFORCE 1502 FILTERS OO-SPAHOZ1502 - reliable water disinfection in Bioforce filters
24W UV LAMPS FOR BIOFORCE FILTERS 1502 OO-SPAHOZ1502 is a specialized UVC filament designed for use in Bioforce filtration systems. By using UV-C ultraviolet radiation, it effectively neutralizes algae, bacteria and other microorganisms responsible for the turbidity and greening of water. This is an original consumable item for the Bioforce Revolution 18000 UVC filter (1353) and filter-pump set (1403), ensuring optimal performance of the entire water treatment system.
24W bulb for Bioforce Revolution 18000 UVC filter (1353) and pump filter kit (1403)
This 24W UV bulb model is specifically designed to work with Bioforce Revolution 18000 UVC pressure filters and complete pump sets. Properly selected power, length and type of handle guarantee a perfect fit in the sterilizing chamber, which translates into high efficiency of disinfection. The use of the original filament ensures even UV-C radiation, stable system operation and long life, thus reducing the need for frequent replacement.
What is 24W UV lamp bulb for Bioforce 1502 filters OO-SPAHOZ1502?
UV lamp bulb 24W for Bioforce 1502 filters OO-SPAHOZ1502 is a linear UV-C ultraviolet light source, used as a replacement cartridge in the UVC lamp that is an integral part of the Bioforce Revolution 18000 UVC filter. The short-wave radiation it emits affects the DNA and cellular structures of microorganisms in the flowing water, effectively preventing them from multiplying further. As a result, the water in the filtration system remains clear, transparent and free of excessive algae and dangerous bacteria.
In practice, this means that the UV bulb is the "heart" of the disinfection system - it is responsible for the physical inactivation of microorganisms, without the need for additional chemicals. It is environmentally friendly, safe for fish and aquatic plants (with properly selected filter and correct installation) and very economical to operate.
Where you mount the 24W UV bulb for Bioforce 1502 filters OO-SPAHOZ1502?
The 24W UV bulb is designed to be mounted inside the Bioforce filter housing only (m.in. Bioforce Revolution 18000 UVC) or a complete filter set with pump (1403). It is placed in a special sterilizing chamber, usually in a quartz shield, through which water flows. This design ensures maximum contact between the UV-C radiation and the water, while preventing harmful light from escaping the device.
Installation of the bulb requires matching the dedicated stem and socket on the UVC lamp. This assures the user that the filament is properly stabilized and the integrity of the sterilization chamber remains preserved. The bulb is not designed for direct room lighting or for operation outside the filter housing - its purpose is to disinfect water in filter systems.
Typical mounting locations for complete Bioforce filters, and consequently for this UV bulb, are:
- ponds and backyard decorative ponds,
- bathing ponds and recreational reservoirs,
- small tanks with ornamental fish (e.g., koi carp, goldfish),
- water filtration systems for gardens and recreational areas.
The use of UV lamp 24W Bioforce - crystal clear water without chemicals
The primary use of the Bioforce 24W UV bulb is to disinfect water in backyard water tanks, ornamental ponds and filtration systems working with pumps. UV-C radiation effectively destroys single-cell algae cells, so that the characteristic "green milk" in the water disappears and the tank regains its natural clarity. In addition, the growth of pathogenic bacteria and microorganisms is reduced, which has a positive effect on the condition of fish and other aquatic organisms.
Examples of daily use of a 24W UV bulb in Bioforce filters:
- Water pond at a single-family house - The bulb keeps the water clear throughout the season, even with plenty of sunshine.
- Ornamental pond with fish - Reduces the number of pathogenic bacteria, and thus reduces the risk of skin and gill infections in fish.
- Reservoir with aquatic vegetation - UV-C radiation reduces algal blooms, allowing plants to grow better and making it easier to admire their decorative qualities.
- Small recreational reservoirs - UVC lamps inside Bioforce filters with this bulb help keep water in rest areas hygienically clean.
UV bulb 24W for Bioforce Revolution 18000 UVC filter - durability, performance and economy
The use of a suitable 24W UV bulb in the Bioforce Revolution 18000 UVC filter guarantees high disinfection efficiency with low energy consumption. These types of light sources are designed for many thousands of hours of continuous operation, providing stable UV-C radiation levels for most of their lifetime. In practice, it is most often recommended to replace the filament once a year, which is a compromise between convenience of use and maintaining maximum efficiency of water sterilization.
Key user benefits:
- Stable power of 24W - perfectly matched to the water flow and size of the tank served by the Bioforce Revolution 18000 UVC filter.
- Long life - filament design allows operation for thousands of hours with high bactericidal and algicidal efficiency.
- Lower operating costs - Less frequent replacement and low energy consumption translate into savings throughout the season.
In day-to-day use, this translates into less frequent service, fewer problems with algae blooms, and significantly better comfort with your pond or pond. The user does not have to worry about a sudden decline in water quality - regular seasonal replacement of the UV filament and simple maintenance of the filter are most often enough to keep the water clear all year round.
Safety of the 24W Bioforce UV bulb in daily use
UV-C radiation is extremely effective, but also harmful to the skin and eyes. Therefore, the 24W UV bulb for Bioforce 1502 OO-SPAHOZ1502 filters must only be used in a closed, designated filter housing. During installation and replacement, it is essential to disconnect the device from the power supply and follow the manufacturer's instructions.
Practical rules for safe use:
- Do not turn on the UV lamp outside the filter housing.
- Avoid looking directly at the glowing UV filament.
- Perform installation and service with power off.
- Take care of the cleanliness of the quartz cover - deposits can reduce the effectiveness of disinfection.
By following the above rules, the user gains maximum protection from UV-C radiation and at the same time the full benefits of the lamp - clean, clear and healthy water in his tank.
Technical highlights of the 24W UV bulb for Bioforce 1502 filters OO-SPAHOZ1502
- Power: 24 W (UV-C, Bioforce filter water disinfection).
- Purpose: Bioforce Revolution 18000 UVC filter (1353) and filter set with pump (1403).
- Product type: UV bulb (filament) for UVC lamp in pressure filter.
- Application: ponds, ornamental ponds, tanks with fish and vegetation, small recreational tanks.
- Method of action: physical inactivation of algae, bacteria and microorganisms by UV-C radiation.
- EAN: 5010646055352.
- External system code: OO-SPAHOZ1502.
Thanks to the use of the original filament with the correct power and parameters, the Bioforce filter maintains full performance, and you can be sure that your pond or pond will look aesthetically pleasing throughout the season.
FAQ - frequently asked questions about the 24W UV lamp bulb for Bioforce 1502 filters OO-SPAHOZ1502
How often should you replace the 24W UV bulb in the Bioforce filter?
It is recommended to replace the UV bulb once a season (once a year), even if it is still lit. After several thousand hours of operation, the effectiveness of UV-C radiation gradually decreases, making the lamp worse at dealing with algae and bacteria. Regular seasonal replacement ensures that disinfection remains highly effective.
Does the 24W UV bulb fit all UVC filters?
Not. This model was primarily designed for the Bioforce Revolution 18000 UVC filter (1353) and the filter-pump kit (1403). Before purchasing, always check the filter markings and compare them with the bulb symbol (OO-SPAHOZ1502, 24W, EAN 5010646055352).
Is UV-C radiation safe for fish and plants?
Yes, as long as the UV bulb works inside a properly installed UVC lamp housing in the filter. The radiation only affects the water flowing in the sterilizing chamber and does not directly reach the organisms living in the tank. As a result, water is disinfected without the need for chemical dosing.
Can I use a Bioforce filter without a working UV bulb?
The mechanical and biological filter will continue to work, but without an active UV-C bulb, effective disinfection of the water will not take place. In practice, this leads to faster algal blooms and deterioration of water clarity. To get the most out of the Bioforce filter, the 24W UV bulb should be in working order and replaced regularly.
What to pay attention to when installing a new light bulb?
Before starting work, disconnect the filter from the power supply, carefully open the housing and remove the old filament. Install the new bulb, matching the contacts to the socket and making sure it is firmly seated. It is worthwhile on occasion to clean the quartz cover from deposits, since dirt and scale can significantly reduce the effectiveness of UV-C radiation. Once the filter is reassembled, the unit can be connected to the mains and the filtration system can be put into operation.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.