TEE FOR AUTOMATIC IRRIGATION SYSTEM OO-HOZ7018
- T-UNION FOR AUTOMATIC WATERING SYSTEM OO-HOZ7018 is a robust T-connector for 13mm hoses, ideal for separating the irrigation line into two zones of the garden. Guarantees tightness, easy installation and high UV resistance.
TRUNK FOR AUTOMATIC WATERING SYSTEM OO-HOZ7018 is a high-quality connecting element, designed for modern irrigation systems in home gardens, allotments and professional plantings. With it, you can easily and quickly split the supply line into two independent directions, providing plants with optimal irrigation exactly where they need it.
Allows efficient watering of two different areas of the garden.
Key benefits:
Compatible with all 13 mm hoses.
Allows supply hoses to be routed to two different areas of the garden.
What is a tee for automatic irrigation system OO-HOZ7018?
The OO-HOZ7018 T-piece is a robust, leak-proof "T" shaped connector designed to connect three sections of 13 mm diameter supply hose. This element is part of drip and sprinkler irrigation systems, allowing you to create branches of the main irrigation line without the need for complicated tools and additional seals.
Thanks to its precise design, the tee guarantees a stable hydraulic connection, resistant to the operating pressure typical of domestic water systems. The materials used are characterized by high mechanical strength and resistance to UV radiation, which is crucial for installation on the ground surface or in sunny areas.
The product is ideal for both new installations and upgrades to existing systems. You can use it to extend a single hose line into two branches leading, for example, to two flowerbeds, two planting strips along a path, or to separate crop sectors on a plot of land.
Where the OO-HOZ7018 tee is installed in an irrigation system?
T-piece for automatic irrigation system OO-HOZ7018 is mounted directly on the 13 mm supply line anywhere you need to separate the line into two directions. Thanks to the "quick connection" design, installation is extremely easy: just slide the hose into the connector and tighten the nut for a secure and tight connection.
The most common places to install a tee:
- Branching of the main irrigation line - For example, from a bus routed from a tap or irrigation controller toward two remote parts of the garden.
- Plant zoning of the installation - a separate perimeter can be allocated for a flower bed and another for a vegetable garden or hedge.
- Creating parallel drip lines - T-piece allows you to run wires along two rows of crops or plantings.
Installation can be carried out both on the surface of the ground, lightly covering the wires with bark or gravel, and under the surface of the ground (at a shallow depth), which improves the aesthetics of the garden and protects the installation from mechanical damage and excessive heating.
Examples of assembly applications:
- division of the installation at the terrace - one line leads to plant boxes, the other to pots at the entrance to the house,
- branching by the garden path - irrigating the bed on the left and right side of the alley,
- creating two sectors on the lawn - for example, sprinklers on both sides of the garden.
Application of the tee for automatic irrigation OO-HOZ7018 in practice
The OO-HOZ7018 tee is designed for a wide range of applications in home and semi-professional irrigation systems. Works well in all areas where reliable water distribution to more than one area is required.
Typical application areas:
- Flower and ornamental beds - allows water to be supplied to two separate groups of plants that may have different irrigation requirements.
- Vegetable gardens, beds and plastic tunnels - Ideal for creating dotted lines along rows of vegetables, with flexibility in the layout of the wires.
- Hedges, shrubs and espalier plantings - allows two parallel lines to be routed along long plantings, increasing the uniformity of irrigation.
- Pots, balcony boxes and raised beds - two branches can be led from a single supply point: for example, to boxes on the terrace and to pots by the fence.
- Small lawns and sprinkler zones - allows the sprinkler circuit to be divided into two sectors, making it easy to adjust the watering range to the shape of the plot.
Thanks to its versatility, the OO-HOZ7018 tee is particularly useful for all those who want:
- Expand the existing irrigation system,
- Optimize watering of new plantings,
- Reduce time spent on manual watering and improve water use efficiency.
TRIPLE FOR AUTOMATIC WATERING SYSTEM OO-HOZ7018 - key features, quality and durability
When choosing components of an irrigation system, it is worth betting on reliable components that will withstand many seasons of intensive operation. The OO-HOZ7018 tee is designed with an emphasis on longevity and safety of use.
The most important product features from the customer's point of view:
- Compatibility with 13 mm hoses - Tee fits standard supply lines used in most popular irrigation systems. This allows you to easily incorporate it into your existing installation, without having to replace hoses.
- High tightness of connections - specially profiled sockets and a system of tightened nuts minimize the risk of water leakage, which translates into savings and stable pressure throughout the installation.
- Weather resistance - the plastics used are resistant to UV radiation, temperature differences and typical mechanical loads (e.g., accidental stepping on, lightly covered with soil or bark).
- Ease of assembly and disassembly - bolt-on connections allow quick adjustment or reconfiguration of lines without specialized tools, making seasonal garden modifications easy.
- Reusable - The tee can be disassembled and reused in new irrigation projects, making it an economical and environmentally friendly solution.
Practical examples:
- If you enlarge your vegetable garden or establish a new flower bed in the next season, simply unscrew the nuts and move the tee to another location, adjusting the layout of the line to the new plantings.
- If you need to repair a section of the system (for example, a damaged section of hose), it is easy to cut out the damaged section and reconnect the line using a tee and straight connectors.
Benefits of using the OO-HOZ7018 tee in your garden
When you invest in the OO-HOZ7018 automatic irrigation system tee, you gain a number of tangible benefits that you will feel both on a daily basis and in the long term.
- Saving time - thanks to the effective separation of supply lines, you do not have to manually move the hose between different zones of the garden. The system works automatically, watering two areas simultaneously.
- Better plant health - Even distribution of water to the two sections of the garden ensures that plants are watered regularly, reducing water stress and promoting lush growth.
- Lower water consumption - A well-designed system with appropriate branches brings water to where it is needed, reducing losses due to excessive or untargeted watering.
- Flexibility in garden design - the possibility of easy expansion and modification of the irrigation system encourages the introduction of new plantings, rearrangement of beds or expansion of green zones.
- Professional effect on a household budget - the use of proven, robust connectors allows you to do the installation yourself with a quality similar to the systems installed by specialized companies.
Technical data and product parameters OO-HOZ7018
- Product type: t-piece for automatic irrigation system
- Model: OO-HOZ7018
- EAN code: 5010646057875
- Purpose: power line separation in garden irrigation systems
- Hose working diameter: 13 mm
- Shape: T (three spigots)
- Connection type: bolted couplings with compression nuts
- Material: high-quality UV-resistant plastic
- Application: drip systems, sprinkler lines, irrigation of flower beds, hedges, vegetable gardens, pots and lawns
- Assembly: surface or shallow underground, without the use of special tools
How to install and use a tee for automatic irrigation OO-HOZ7018?
Installation of the tee is intuitive and requires no plumbing experience, making the product ideal for both novice gardeners and those expanding existing systems.
Installation steps:
- Plan the route of the main irrigation line and branch locations.
- Disconnect the water supply, then cut the 13 mm hose at the desired location.
- Put the nuts of the tee on both ends of the hose and on the third section, which will be the new branch.
- Slide the ends of the hoses onto the spigots of the tee until they stop, then tighten the nuts evenly.
- After the installation is complete, start the system and check the tightness of the connections.
In daily use, the tee requires no special maintenance. It is only worthwhile to check the condition of the wires and nuts once in a while, especially after winter or after intensive gardening work.
FAQ - Frequently Asked Questions about TRIPLE FOR AUTOMATIC WATERING SYSTEM OO-HOZ7018
1. Does the OO-HOZ7018 tee fit all 13mm hoses?
Yes, the tee is compatible with all standard 13mm diameter hoses and supply lines used in popular irrigation systems.
2. Does the installation require special tools?
No, assembly is done manually. All you need to do is cut the hose in the right place, slide it onto the ferrules of the tee and tighten the compression nuts.
3. Can the tee be used outdoors all year round?
Yes, the tee material is resistant to UV rays and typical weather conditions. However, it is recommended that in areas with very cold winters, before the winter season, the water should be drained from the system or protected from freezing.
4. Is it suitable for drip and sprinkler systems?
Yes, the OO-HOZ7018 tee can be used both in classic drip lines and in systems with sprinklers - wherever 13 mm cable is used.
5. What are some examples of garden applications?
It is most often used to divide the main irrigation line into two zones: for example, a flower bed and a vegetable garden, two planting strips along a path, or two parts of a lawn with separate sprinklers.
6. Can I move the tee to another location in the future?
Of course. The element can be easily disassembled by unscrewing the nuts, and then reused in another part of the system or in a completely new irrigation system.
7. Is the tee suitable for self-assembly by a novice gardener?
Yes, the product is ideal for novice users. Clear operating principle, easy installation and high reliability make it easy for you to do the installation branching on your own.
TRIPLE FOR AUTOMATIC WATERING SYSTEM OO-HOZ7018 is a simple but extremely effective element that will ensure that your plants are watered evenly and without unnecessary effort. Choose a proven solution and enjoy a healthy, green garden all season long.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.