1/2" HOSE COUPLING WITH ALLOY OO-HOZ20756002
- The 1/2" hose coupling with stop OO-HOZ20756002 is a garden quick coupler with Aqua Stop function that fits 1/2" and 5/8" hoses. It provides a leak-proof connection, a comfortable soft plastic handle and saves water when watering the garden.
Hose Coupling 1/2" with Alloy OO-HOZ20756002 is a high quality garden quick coupling designed for 1/2" and 5/8" (12.5 and 15 mm) hoses. Equipped with an automatic water shut-off function (Aqua Stop), it provides convenient, safe and fully controlled operation of the irrigation system in the garden, on the allotment, terrace or when washing the car. Ergonomic soft plastic grip part improves comfort and guarantees a firm grip even with wet hands.
What is the 1/2" hose fitting with stop OO-HOZ20756002 and how its Aqua Stop system works?
Hose coupling 1/2" with alloy OO-HOZ20756002 is a component of the irrigation system, which is installed at the end of the garden hose. Its purpose is to allow quick and tight connection of various accessories - sprinkler guns, sprinklers, lances, washers or tap connectors - without having to turn off the water on the tap. Built-in Aqua Stop valve automatically cuts off the flow of water when the accessory is disconnected from the fitting. This ensures that when the gun or sprinkler is disconnected, there is no uncontrolled splashing or wasting of water.
In practice, the operation is as follows: the water in the hose remains under pressure, but when the tip is disconnected, the flow is immediately blocked inside the fitting. When the accessory is plugged back in, the valve opens automatically and the water begins to flow. This is convenient especially if you frequently change tips, for example, switching between a gun with adjustable spray pattern and a sector sprinkler.
Where the connector OO-HOZ20756002 is installed and what hoses it is compatible with?
Hose coupling 1/2" with alloy OO-HOZ20756002 is designed to be mounted on the end of a flexible garden hose. Fits the two most popular diameters of garden hoses: 1/2" and 5/8" (12.5 and 15 mm). This means that you can use it both in small home gardens and in more elaborate watering systems on allotments or at single-family houses, where longer, thicker hoses are used.
Installation is extremely simple: just slide the cut, straight end of the hose into the fitting, tighten the compression nut and you're done - no tools required. This type of connector is usually installed:
- at the end of the hose leading to the sprinkler gun or lance,
- on sections of hose connecting the tap to the main irrigation line,
- in mobile watering systems, where accessories are frequently changed,
- in areas where we are particularly concerned about avoiding water spills when the tip is unfastened.
Thanks to the standard of garden quick couplers, this product is compatible with most of the popular systems available on the market. So you can easily connect it to your existing plumbing components - no need to replace the entire watering kit.
High quality 1/2" and 5/8" (12.5 and 15 mm) hose coupling
Allows quick connection and disconnection of 1/2 diameter hose accessories"
Grip part with soft plastic inserts
The valve cuts off the flow of water when disconnected from the gun, sprinkler, etc.
Garden connector OO-HOZ20756002 - comfortable handling due to soft plastic
One of the key advantages of the 1/2" hose coupling with alloy OO-HOZ20756002 is the ergonomic grip part with soft plastic inserts. This design guarantees:
- firm grip - The connector does not slip out of your hands even when they are wet or soiled with soil,
- convenient tightening - Soft inserts improve friction, making it easy to mount on the hose and connect to accessories without tools,
- comfort during prolonged work - Watering a large garden or washing a car is often dozens of minutes of continuous work. Soft plastic reduces hand fatigue.
In everyday use, this means that even the elderly or those with less grip strength can easily operate the irrigation system themselves. The connector will come in handy for regular watering of flower beds, lawn, vegetable garden, washing the terrace or garden equipment. High ease of use will also be appreciated by anyone who frequently changes hoses between different water points.
Durability and reliability - why choose model OO-HOZ20756002?
The 1/2" hose coupling with alloy OO-HOZ20756002 is designed for heavy, long-term use. It is made of high quality plastic that is resistant to UV radiation, temperature changes and typical mechanical loads found in the garden. This means:
- resistance to cracking and deformation - The connector is not damaged by frequent connection and disconnection,
- stable, tight connection - Properly designed seals minimize the risk of leaks at the connection to the hose and accessories,
- trouble-free operation of the stop valve - Aqua Stop mechanism is protected against dirt and corrosion, so it remains fully functional for a long time.
In practice, when you buy this fitting, you get an accessory that will serve you for many seasons, without having to replace it every year due to leaks or cracks. It's a real time and money saver, and there's less risk of sudden failure during heavy watering in hot weather.
Key features and benefits of 1/2" hose coupling with alloy OO-HOZ20756002
- Compatibility with popular hoses - Fits 1/2" and 5/8" hoses (12.5 and 15 mm), making it easy to fit into an existing installation.
- Aqua Stop function - automatic water shut-off when gun, sprinkler, etc. are disconnected., eliminating splashing and wasting water.
- Quick installation without tools - Intuitive design allows fitting in seconds.
- Ergonomic grip section - soft inserts improve handling comfort and grip security.
- High quality workmanship - durable, weather-resistant plastic for long life.
- Universal application - Watering the garden, greenhouse, vegetable garden, washing the car, cleaning tools, terrace or garden furniture.
Practical application - where the OO-HOZ20756002 connector will work best?
Hose coupling 1/2" with alloy OO-HOZ20756002 was created for users who value convenience and order on the property. Excellent performance:
- in home gardens - During daily watering of flower beds, lawns, potted plants on the terrace,
- on recreational plots - When frequently changing the hose between the water point and different watering zones,
- in the garage and the home workshop - When washing a car, motorcycle, bicycle, garden equipment or facade,
- in small farms and greenhouses - Where fast and tight re-wiring of sprinkler tips is appreciated.
Thanks to the stop function, you will avoid unnecessary wetting of yourself, the walls of the building or neighboring landscaping elements when you change the sprinkler tip. This is especially important when watering near patio doors, windows or electric garden equipment.
Technical data of 1/2" hose coupling with alloy OO-HOZ20756002
- Purpose: garden quick coupler with stop function (Aqua Stop)
- Hose diameter: 1/2" and 5/8" (12.5 and 15 mm)
- Function: automatically cut off the water flow when the accessory is disconnected
- Body material: high quality plastic
- Grip elements: soft plastic inserts to improve ergonomics
- Applications: irrigation systems for gardens, allotments, greenhouses, washing of vehicles and outdoor surfaces
- Connection type: quick release compatible with standard garden accessories
FAQ - Frequently asked questions about 1/2" hose coupling with alloy OO-HOZ20756002
1. Does the OO-HOZ20756002 fitting fit any 1/2 hose"?
Yes, the connector is compatible with most standard 1/2" and 5/8" (12.5 and 15 mm) garden hoses. It is important that the end of the hose is straight and evenly cut to ensure proper sealing.
2. Does the stop function work regardless of water pressure?
Yes, the Aqua Stop valve cuts off the flow when the accessory is disconnected regardless of the standard pressure in the home network. This prevents water from escaping from the hose when the gun is discharged.
3. Can I use this connector with other brands of guns and sprinklers?
Yes, the 1/2" hose coupling with alloy OO-HOZ20756002 uses the popular garden quick connect standard, so it works with most accessories on the market.
4. How to take care of the connector to make it last as long as possible?
After the season is over, it is a good idea to empty the hose of water and store the connector in a dry, covered place, protecting it from frost. Periodic flushing of the interior will remove any dirt that could impede the operation of the valve.
5. Does the installation require the use of tools?
No, the installation of the connector is completely tool-free. Simply slide the hose inside the fitting and tighten the pressure nut by hand using the ergonomic soft grip part.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.