HOSE COUPLING WITH 3/4" ALLOY OO-HOZ2065P0000
- Hose coupling with 3/4" stop OO-HOZ2065P0000 Hozelock Aqua Stop - garden quick coupling with shut-off valve. Provides leak-proof 3/4" hose connection, soft grip, kink protection and water savings. Ideal for garden irrigation.
Hose coupling with 3/4" stop OO-HOZ2065P0000 - reliable garden quick coupling with shut-off valve
HOSE COUPLING WITH 3/4" ALLOY OO-HOZ2065P0000 is a high quality garden quick coupling designed for 3/4" (19 mm) diameter hoses. Equipped with built-in shut-off valve (Aqua Stop), automatically stops the flow of water when the sprinkler or other accessory is disconnected, which significantly increases the comfort of work in the garden, reduces water consumption and protects against accidental flooding of the environment.
The coupling is mounted on the end of the 3/4" garden hose, by sliding the hose onto the spigot and tightening with the clamping mechanism. On this side there is a flexible anti-kink nozzle, which further protects the hose from kinking, while on the other side - a quick-connector compatible with standard garden accessories (sprinkler guns, sprinklers, lances, washers, tap connections).
Hozelock Aqua Stop OO-HOZ2065P0000 - convenient and leak-proof 3/4" hose connection with shut-off valve
High quality 3/4" (19 mm) hose coupling with shut-off valve has been designed for users who expect failure-free, leak-free and comfortable operation from garden accessories. The materials used, which are resistant to UV radiation and changing weather conditions, allow you to use the product for many seasons, without the risk of cracks or loss of tightness.
Soft to the touch for comfort - side grip surfaces are covered with a soft, non-slip coating. This ensures that the connector fits securely in your hand, even when you are working with wet gloves or have wet hands. This is an important advantage when frequently changing accessories, such as between a sprinkler gun and a pendulum sprinkler.
Flexible end prevents kinking and twisting of the hose - specially designed flexible sleeve at the outlet of the connector makes the hose bend freely, while at the same time there is no bending at an acute angle. This reduces the risk of pressure drops and interruption of the water stream, which is important especially with long garden hoses.
Disconnecting the accessory cuts off the water flow - built-in Aqua Stop valve closes the water flow immediately when the accessory tip is removed. This way, you don't have to go back to the tap to turn off the water every time you want to change the gun, lance or sprinkler. This solution increases the convenience of work, reduces the time of doing garden work and helps to save water.
What is the 3/4" alloy hose fitting OO-HOZ2065P0000 and how it works?
Hose coupling with 3/4" alloy OO-HOZ2065P0000 is a component of the irrigation system that connects the garden hose to the end accessories. It is equipped with an integrated aqua Stop mechanism - a special valve inside the body that automatically closes the flow of water when the accessory is disconnected.
In practice, this means that when you want to:
- detach the sprinkler gun to attach the automatic sprinkler,
- replace the watering lance with a paving stone washer,
- temporarily stop watering to move the sprinkler to another location,
- you simply unfasten the accessory, and the water stops flowing. There is no uncontrolled ejaculation of water from the end of the hose, no flooding of the terrace, paths or walls of the building.
Thanks to this design, the connector acts as both a quick coupler and a shut-off valve, greatly simplifying the operation of the home irrigation system.
Where the 3/4" alloy hose coupling is mounted OO-HOZ2065P0000?
The coupling with a stop is designed to be mounted directly on the the end of a 3/4" (19 mm) garden hose. Proper installation is done in a few simple steps:
- Cut off the end of the hose evenly (if it is deformed or worn).
- Loosen the coupling nut and slide the end of the hose as far as it will go onto the inner spigot.
- Tighten the nut so that the hose is tightly clamped on the body.
- On the opposite side of the connector, plug in the accessory of your choice - a gun, sprinkler, lance or other device compatible with the 3/4 quick-connector".
The connector is installed most often:
- at the end of the main garden hose used for hand watering flower beds and lawns,
- on the section of hose used to supply automatic sprinklers,
- in backyard installations, allotments, as well as at cottages, where quick installation and removal of fittings is important.
The dimensional standard and quick-connect design make the connector compatible with most popular irrigation systems on the market.
Use of 3/4" alloy hose coupling OO-HOZ2065P0000 in daily garden work
Thanks to its versatility and built-in shut-off valve, 3/4" alloy fitting OO-HOZ2065P0000 will prove itself in many situations:
- Watering plants in the garden - quick connection of various sprinkler attachments (multi-function gun, telescopic lance, fan sprinkler) allows you to adjust the water flow to delicate flower beds, ornamental shrubs, trees or dense lawn.
- Washing the car, terrace and garden furniture - the ability to temporarily shut off the water flow without closing the tap makes it easier to use foamers, brushes and washing nozzles. Simply detach the accessory to interrupt the flow of water, move to another location and reconnect the tip.
- Irrigation of greenhouses and foil tunnels - changing watering tools inside an enclosed space is more convenient and safer when the water automatically stops flowing when the tip is removed, protecting plants from flooding.
The product will be suitable for both small home gardens and larger commercial gardens, ROD plots or cottage home areas.
Key features and benefits of the Hozelock Aqua Stop 3/4" fitting OO-HOZ2065P0000
- Hose diameter: 3/4" (19 mm)
- Product type: hose coupling with stop (quick-connector with shut-off valve)
- Aqua Stop function: automatic shut-off of the water flow when the accessory is disconnected
- Soft, non-slip handle: comfortable operation even with wet hands
- Flexible tip: protects the hose from kinking and twisting
- High quality workmanship: durable plastics resistant to UV and weather conditions
- Easy installation: intuitive attachment to the hose, without the use of specialized tools
- Universal compatibility: fits most garden accessories with quick release system
- Product code: OO-HOZ2065P0000
- EAN code: 5010646051910
The combination of ergonomic design, water shut-off function and high durability makes the 3/4" hose coupling with stop OO-HOZ2065P0000 an excellent choice for discerning users who value convenience, tidiness and water saving during any garden hose work.
Why choose a 3/4" alloy hose coupling OO-HOZ2065P0000?
When you invest in a branded connector with a shut-off valve, you gain:
- Safety and control of water flow - no uncontrolled water leakage when the accessory is disconnected, which protects against accidental flooding of the terrace, garden paths or building walls.
- Saving time - there is no need to return to the tap each time to turn off the water when changing the hose end. You perform the entire operation directly at the work site.
- Less water consumption - Aqua Stop valve reduces water loss that usually occurs when switching accessories. This has both environmental and economic significance.
For example, when watering a large garden, where you frequently change the watering mode (rotary sprinkler to handgun or tree lance), the connector with a stop will allow you to do it in seconds, without splashing the environment and wasting water.
FAQ - Frequently asked questions about 3/4" alloy hose coupling OO-HOZ2065P0000
Question 1: What hose does this fitting fit into?
The coupling is designed for garden hoses with a diameter of 3/4" (19 mm). It should not be used with 1/2" or 1" hoses, as this will not ensure a proper seal.
Question 2: Does the connector fit standard garden guns and sprinklers?
Yes. The connector is designed to the standard of popular garden quick couplers, making it compatible with most guns, sprinklers, lances and other accessories on the market.
Question 3: How does the stop function (Aqua Stop) work??
Inside the connector is a valve that opens automatically when the accessory is connected to the end of the quick-connector. When it is disengaged, the valve automatically closes, cutting off the outflow of water hose. So you can safely change accessories without turning off the tap.
Question 4: Is the connector frost resistant?
It is recommended that for the winter period drain the system of water and store the connector in a dry, covered place. This will avoid damage caused by water freezing inside the component and ensure long-term, trouble-free operation.
Question 5: Does the fitting require tools?
Not. Assembly is very simple and is done without the use of specialized tools. Simply slide the hose evenly onto the fitting ferrule and tighten the compression nut firmly by hand.
Question 6: Does the flexible end really prevent the hose from kinking?
Yes. The specially shaped, flexible end acts as a stress reliever - the hose can bend freely, but does not break sharply at the very end, preventing sudden pressure drops and watering interruptions.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.