AERATION PUMP 2700 OO-HOZ1820
- Aeration pump 2700 OO-HOZ1820 is a powerful blower for ponds and garden ponds. Provides a flow rate of 2700 l/h and effective aeration to a depth of 2 m, improving fish health and water clarity.
Aeration pump 2700 OO-HOZ1820 - reliable aeration of garden ponds and ponds
Aeration pump 2700 - basic information
Maks. flow 2700 l/h Max. 2 m deep
AERATION PUMP 2700 OO-HOZ1820 is a high-performance electric device designed for continuous aeration of water in ponds, decorative ponds, breeding tanks and smaller water installations. Its task is to provide adequate oxygen to the water, which directly translates into fish health, water clarity and a stable biological ecosystem in the tank.
Thanks to maximum flow rate of 2700 l/h and working to depth of 2 m, model OO-HOZ1820 works well both in backyard ponds and in larger garden ponds where intensive and even aeration is required.
The pump is designed for quiet, energy-efficient and maintenance-free operation. A robust housing protects the mechanism from moisture and external factors, and a modern design minimizes the need for servicing.
Aeration pump 2700 OO-HOZ1820 - construction, installation and installation site
Where the aeration pump 2700 OO-HOZ1820 is installed? The device is installed outside the water body - on a stable, dry and level surface near the pond or pond. The pump is a classic aeration pump (blower), which means that it it is not immersed in water. From the pump comes an air duct that distributes air to aeration stones, diffusers or aeration bars already placed below the water surface.
Practical installation tips:
- Stable base - Place the pump on a hard surface (concrete slab, cobblestone, board) to minimize vibration and noise.
- Protection from rain - although the housing is resistant to outdoor conditions, it is recommended to place the device under a canopy, in a technical box or a small filter gazebo.
- Correct positioning of the air hose - avoid kinks and sharp bends in the duct so as not to restrict air flow. Choose the length of the cable so that it easily reaches the deepest part of the tank.
Examples of daily use of assembly:
- Pond by the terrace - pump set up next to the wooden structure of the terrace, air hose introduced discreetly along the edge of the pond to the diffuser in the middle of the tank.
- Garden pond on the plot - a device mounted in a small technical box next to the pressure filter, with an air distributor feeding several aeration stones.
- Breeding tank - pump placed in a dry utility room, a cable routed through the wall to several tubs of ornamental fish.
Aeration capacity and efficiency - why 2700 l/h matters?
Parameter maximum flow of 2700 l/h means that the aeration pump 2700 OO-HOZ1820 is able to deliver a very large amount of air to the tank, which directly translates into a high concentration of dissolved oxygen in the water. Oxygen is crucial for all aquatic organisms - from fish, to beneficial filter bacteria, to plants.
Three key benefits of efficient aeration:
- Fish health and condition - with the right amount of oxygen, fish are more active, take in food better, grow faster and show greater resistance to disease. The risk of suffocation is also reduced, especially in hot weather.
- Water purity and clarity - well aerated water promotes the development of good nitrifying bacteria that break down harmful nitrogen compounds (ammonia, nitrites). As a result, the water becomes clearer and more biologically stable.
- Safety in winter - intensive movement and aeration of the water reduces the freezing of the entire surface of the pond, creating ice breaks and allowing the discharge of septic gases formed at the bottom of the tank.
Examples of applications of 2700 l/h capacity:
- Pond with a stock of koi carp - a large number of fish requires intensive aeration, so that even in hot weather oxygen is maintained at a safe level.
- Pond with cascade - aeration pump additionally supports natural aeration with the stream, stabilizing water parameters.
- Reservoir of biological moving bed filter - strong airflow drives the bed operation and supports biological filtration processes.
Aeration pump 2700 OO-HOZ1820 - garden, farming and aquaculture applications
Model OO-HOZ1820 is a universal aeration pump designed for many types of water tanks. Thanks to its compact size and high efficiency, it will work well for both individual users and small livestock farms.
Main application areas:
- Ponds and decorative ponds - provides constant aeration, which improves the appearance of the water, reduces the growth of algae and supports the work of mechanical and biological filters.
- Ponds with ornamental fish - Ideal for tanks with koi carp, goldfish and other species that require well-oxygenated water.
- Breeding tanks - supports intensive fish breeding in tubs, pools and small ponds, stabilizing water parameters and reducing stress in animals.
Practical examples of use:
- Private garden - the owner installs a pump at the pond with a waterfall to keep the water moving and oxygenated throughout the year, so the reservoir remains visually appealing.
- Recreational plot - the pump works seasonally from spring to autumn, aerating the pond where consumable fish swim and aquatic plants grow.
- Small fish farm - the device feeds several air diffusers located in different parts of the tank, evenly supplying oxygen to all sectors.
Working depth up to 2 m - optimal aeration also in deeper ponds
Aeration pump 2700 OO-HOZ1820 is designed to work with diffusers placed at a depths of up to 2 meters. This means that the airflow is strong enough to also effectively aerate the deeper zones of the tank, where sediment is most likely to accumulate and where oxygen is least available.
Three key advantages of aeration at depths of up to 2 m:
- Better mixing of water layers - Air bubbles lift water from the bottom toward the surface, preventing stagnation and the formation of anaerobic zones.
- Reduction of sludge and odors - under aerobic conditions, the decomposition process of organic matter proceeds faster and without the noxious odor of putrefaction.
- Safety throughout the tank - fish that seek cooler, deeper parts of the water in hot weather still have access to sufficient oxygen.
Examples of daily use of deeper aeration:
- Pond with a depth of 1.8 m - a diffuser placed at the deepest point ensures even mixing of the entire water column.
- Pond with a swimming area - in the deeper zone, intended for swimming, aeration reduces the growth of algae and improves the comfort of users.
- Economy tank - pump-supplied diffusers are placed alternately at different depths, so that the water remains well oxygenated in each zone.
Durability, reliability and comfort of the aeration pump 2700 OO-HOZ1820
The 2700 OO-HOZ1820 REPAIR PUMP is designed for many seasons of trouble-free operation. A robust enclosure protects internal components from mechanical damage and weather conditions, while a thoughtful design minimizes noise and vibration.
Three key features from the perspective of durability and convenience:
- High quality workmanship - the use of durable materials translates into resistance to corrosion, moisture and UV radiation, which is particularly important for outdoor installation.
- Quiet operation - the pump generates a low level of noise, so it can also work near the terrace, gazebo or rest areas without disturbing relaxation.
- Easy operation and service - access to the components requiring periodic inspection is easy, which makes it possible to quickly clean the air filters or replace worn operating parts.
Examples of practical use:
- Year-round operation - the user leaves the pump in continuous operation, and only in winter additionally protects it from snow and ice.
- Seasonal use - the pump is started in spring and turned off in late autumn; before winter, the user cleans the air filter and stores the unit in a dry room.
- Installation in the rest area - thanks to quiet operation, the device can be placed just behind the hedge next to the terrace, without the risk of noise nuisance.
Technical data of aeration pump 2700 OO-HOZ1820
- Model: Aeration pump 2700 OO-HOZ1820
- Maximum airflow: 2700 l/h
- Maximum working depth of the diffuser: 2 m
- Device type: aeration pump / air blower
- Mounting type: installation outside the tank, above the water surface
- Application: ponds, garden ponds, breeding tanks, small aquaculture installations
- Product code: OO-HOZ1820
- EAN: 5010646043397
FAQ - Frequently asked questions about aeration pump 2700 OO-HOZ1820
Question 1: Can the 2700 OO-HOZ1820 aeration pump operate around the clock??
Yes, the 2700 OO-HOZ1820 aeration pump is designed for continuous operation 24/7. It is recommended to constantly aerate the tank to ensure that the fish get enough oxygen and stable water parameters.
Question 2: Can the device be mounted in the rain?
The pump has a rugged housing, but for maximum durability it is recommended to install it in a place sheltered from direct rainfall, for example, under a canopy, in a technical box or special enclosure.
Question 3: How deep can I place the aeration stone?
The recommended maximum working depth is 2 meters. Placing the diffuser deeper can restrict airflow and reduce aeration efficiency.
Question 4: Is the pump suitable for winter operation in a pond?
Yes, aeration pump 2700 OO-HOZ1820 can also work in winter. In this case, the diffuser should not be placed at the deepest point tank so that the water does not cool excessively at the bottom. Winter aeration makes it easier to maintain the break and drain septic gases.
Question 5: What size pond is this pump designed for??
With a capacity of 2,700 l/h the OO-HOZ1820 model will work well in medium and larger ponds and garden ponds. When selecting the device, it is worth considering not only the volume of water, but also the number of fish and the intensity of sunlight in the tank.
Question 6: Can the pump be used in tanks with farmed fish?
Yes, the pump is suitable for farming tanks and small aquaculture systems. Ensures stable oxygenation of the water, which is crucial for the health and rapid growth of fish.
Question 7: How often should the pump be serviced?
Frequency of servicing depends on operating conditions. Usually it is enough periodic cleaning of the air filter and inspection of the cable and diffuser. If there is a worrying drop in performance, it is worth checking the condition of the membranes or other operating parts.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.