BIOFORCE SERVICE KIT OO-HOZ1510
- Genuine BIOFORCE SERVICE KIT OO-HOZ1510 for Hozelock Bioforce Revolution 6000/9000/14000 filters. Complete set of gaskets: body, control valve and quartz sleeves, guaranteeing full tightness and trouble-free operation of the filter and UV lamp.
BIOFORCE SERVICE KIT OO-HOZ1510 - original gaskets for Hozelock Bioforce Revolution 6000 / 9000 / 14000 filters
BIOFORCE SERVICE KIT OO-HOZ1510 is a complete, original service gasket set designed for pressure filters Hozelock Bioforce Revolution. With it, you will quickly and effectively restore the full tightness and efficiency of the filter operation in a pond, decorative pond or small backyard pond. The kit contains all the key sealing components that naturally wear out over the life of the device.
Original Hozelock service kit.
Suitable for:
* Hozelock Bioforce Revolution 6000
* Hozelock Bioforce Revolution 9000
* Hozelock Bioforce Revolution 14000
The set includes:
main body gasket
control valve gasket
quartz sleeve seals
What is BIOFORCE SERVICE KIT OO-HOZ1510?
Bioforce service kit OO-HOZ1510 is an original set of gaskets designed specifically for pressure filters Hozelock Bioforce Revolution 6000, 9000 and 14000. The set includes:
- Main body gasket - Responsible for the tightness of the filter cover and tank, prevents water leakage and air intake into the system.
- Control valve gasket - takes care of the tightness where the water flow is regulated, which has a direct impact on the efficiency and safety of the filter's operation.
- Quartz sleeve seals - specialized gaskets used in the area of the UV lamp and sleeve elements to prevent water from entering the chamber with the filament.
These elements are made of high quality materials resistant to UV rays, temperature changes and constant contact with water. When you choose an original service kit, you get full compatibility with your device and the assurance of long-lasting, trouble-free operation of the filter.
Where the BIOFORCE SERVICE KIT OO-HOZ1510 is installed?
Gaskets from OO-HOZ1510 set mounts directly into pressure filters Hozelock Bioforce Revolution - inside and at the interface of key components of the device. Proper installation is critical to maintaining the tightness of the filtration system and the safety of the UV lamp operation.
Typical installation locations:
- Connection of the cover to the filter body - long perimeter gasket is inserted into the groove on the edge of the body or cover. Before installation, it is recommended that the socket be thoroughly cleaned of sediment and dirt.
- Flow control valve - the smaller seal is installed within the valve that changes the direction and intensity of water flow. Replacing this gasket solves most leakage problems at the valve.
- UV lamp area, quartz sleeves - quartz sleeve gaskets seal where the sleeve passes through the UV lamp housing. This is a critical point in the system - even a small leak can result in flooding of the filament and its damage.
Assembly of the set is simple and can be done independently by a user with basic technical skills. Simply disassemble the filter according to the manufacturer's instructions, remove the old, worn seals and replace them with new parts from the OO-HOZ1510 kit.
Examples of the use of assembly in practice:
- Periodic servicing of the filter before the season - replacing the seals after winter to prepare the pond for the intensive work of the filter system in spring and summer.
- Removal of an apparent water leak from the filter housing - quick diagnosis and replacement of the body seal instead of costly replacement of the entire unit.
- UV lamp repair after sogging - replacement of quartz sleeve seals after flooding, which protects the new filament from repeated failure.
Applications and benefits of using the Hozelock Bioforce OO-HOZ1510 service kit
Main application of the BIOFORCE OO-HOZ1510 kit is a full reconditioning and sealing of pond filters Hozelock Bioforce Revolution 6000 / 9000 / 14000. Regular replacement of seals is crucial to maintain high water quality, proper mechanical and biological filtration, and effective operation of the UV lamp.
Key user benefits:
- Restoration of factory filter tightness - the kit eliminates leaks and prevents air suction, so the pump runs stably, without performance drops and additional noise.
- UV lamp protection and safety of use - New quartz sleeve seals protect the inside of the lamp from water, extending the life of the filament and minimizing the risk of failure.
- Lower operating costs - replacing a set of seals is much cheaper than buying a new filter, and a well-serviced device can work reliably for many seasons.
Examples of daily use:
- Pond at a single-family house - the owner changes the seals every few seasons to keep the water in the pond clear, without unpleasant odors and excessive algae growth.
- Decorative pond in the garden of a restaurant or hotel - professional maintenance staff use the service kit for regular maintenance of Bioforce filters, providing guests with an aesthetically pleasing and clean water tank.
- Pond with ornamental fish (e.g. koi carp) - attention to the tightness and performance of the filter has a direct impact on the health of fish; the use of original seals allows you to maintain stable water parameters.
Key features and benefits of the Hozelock Bioforce OO-HOZ1510 service kit
- Genuine Hozelock parts - Guarantee of perfect fit with Bioforce Revolution 6000, 9000, 14000 filters and full compatibility with the design of the device.
- High material resistance - gaskets are made of durable, flexible plastics resistant to UV, water, temperature changes and water treatment agents.
- Complete service kit - includes all key gaskets necessary to renew the filter seal: main body gasket, control valve gasket and quartz sleeve gaskets.
Benefits from the user's point of view:
- Simple, quick repair - no need to fit replacements, the set includes everything needed for one comprehensive service.
- Filter and installation safety - no leaks reduces the risk of damage to electrical equipment, flooding of the environment or erosion of the ground around the pond.
- Better conditions for plants and fish - stable filter operation translates into clean, oxygenated water, which promotes a healthy tank ecosystem.
Using bioforce original service kit OO-HOZ1510, you are investing in the long-term reliability of the entire filtration system. This solution is especially appreciated by owners of extensive water gardens and users who expect maintenance-free, stable operation of equipment for many seasons.
Technical data - BIOFORCE SERVICE KIT OO-HOZ1510
- Purpose: hozelock Bioforce Revolution 6000, 9000, 14000 pressure filters
- Product type: original set of service gaskets
- Components included:
- main filter body gasket,
- control valve gasket,
- quartz sleeve seals.
- Environmental Purpose: ponds, garden ponds, decorative tanks, tanks with ornamental fish
- Filter type: pressure filter with UV module (Bioforce Revolution line)
- Compatibility: only with original Hozelock Bioforce Revolution filters with capacities of 6000, 9000, 14000 l
- Product code: OO-HOZ1510
- EAN code: 5010646055406
FAQ - Frequently asked questions about BIOFORCE SERVICE KIT OO-HOZ1510
Question 1: Which filters the Bioforce OO-HOZ1510 service kit fits into?
The kit is designed for pressure filters Hozelock Bioforce Revolution 6000, 9000 and 14000. It is not recommended to use it on other models or filters from other manufacturers, because the seals have specific dimensions to fit this series.
Question 2: How often should the seals in the Bioforce filter be replaced??
Frequency of replacement depends on the intensity of use, water quality and operating conditions of the device. It is usually recommended to check the condition of the gaskets every season and to replace them every few years or at the first signs of leakage (leaks, air intake, drop in performance).
Question 3: Can gasket replacement be done by yourself?
Yes. Installation of service set OO-HOZ1510 is simple enough that most users are able to carry it out on their own using the filter manual. It is important to thoroughly clean the gasket slots and properly align the new components.
Question 4: Does the kit contain all the necessary gaskets?
Kit Bioforce OO-HOZ1510 contains the most important sealing components: main body gasket, control valve gasket and quartz sleeve gaskets. This is a set that in most cases fully restores the integrity of the filter and UV lamp sections.
Question 5: What do I gain by choosing an original set instead of cheaper substitutes?
Original Hozelock gaskets guarantee perfect fit, high durability and full compatibility with Bioforce Revolution filter design. This reduces the risk of leaks, accelerated wear of components, and unforeseen failures. As a result, the filter works stably and efficiently, and you avoid the costs associated with possible repairs or replacement of the device.
Question 6: After replacing the gaskets, do I need to additionally lubricate them with silicone?
In most cases, proper seating of new gaskets in clean sockets is sufficient. If the manufacturer allows the use of silicone gasket grease, a thin layer can be applied to make installation easier and increase tightness, but remembering to use only preparations designed for contact with water in ponds.
Question 7: Does replacing gaskets affect pond water quality?
Yes, indirectly is of great importance. An efficient, leak-proof filter ensures a steady, proper flow of water, which translates into effective mechanical filtration, biological filtration and effective UV lamp operation. As a result, the water remains clear and the living conditions for plants and fish are much better.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.