SUBMERSIBLE DIRTY WATER PUMP SP 4001 OB-SP4001
- Dirty water submersible pump SP 4001 OB-SP4001 - power 400 W, capacity 7500 l/h, head 5 m. Ideal for basements, trenches, ponds and sumps. It can handle dirt up to 25 mm, has 1" and 32 mm connections, a compact, resistant o
Dirty water submersible pump SP 4001 - what is this device?
Dirty water submersible pump SP 4001 OB-SP4001 is a compact, electric device designed for rapid pumping out of dirty water from flooded rooms, building excavations, tanks, ponds or sumps. With a power of 400 watts and a maximum capacity of 7,500 l/h, the pump efficiently copes with emptying small and medium-sized tanks in a short time, ensuring safety and comfort at home and in the garden.
The pump is designed to operate completely submerged in water. The body design, leak-proof seals and convenient carrying handle make installation and operation a breeze - just plug in the hose, submerge the pump in water, plug the power cord into the outlet and start the unit.
Where the submersible dirty water pump SP 4001 OB-SP4001 is installed?
The SP 4001 submersible pump is mounted directly on the site from which water is to be pumped out. Place the device on as even, hard surface as possible (e.g., concrete, slab, tank bottom), so that it does not suck excessive sediment from the bottom itself. The pump works perfectly:
- in flooded basements and garages - just set it at the lowest point of the room, connect a garden hose and direct the water to the sewer system or outside the property,
- in manholes and process tanks - installed temporarily when the water level needs to be lowered quickly,
- in ponds and small ponds - for seasonal emptying of the tank before cleaning or maintenance,
- in construction excavations - for dewatering foundation pits, formwork, drainage ditches.
With 1" (25 mm) and 32 mm hose connections, the pump can be easily connected to typical garden hoses and discharge hoses used in home and garden work. The lightweight design makes it easy to move between different work points - ideal for home users, DIYers and contractors alike.
Application of submersible pump for dirty water SP 4001
The SP 4001 OB-SP4001 DRAINAGE PUMP FOR DRAINAGE WATER has been developed for everyday tasks of dewatering and removing contaminated water. Thanks to its ability to pump liquids with solid particles up to 25 mm in diameter, the device can cope with water containing sand, silt, small stones or organic residues.
Typical applications include:
- Recovery from flooding and waterlogging - after heavy rainfall, the pump allows you to quickly lower the water level in the basement, garage, boiler room, or utility rooms.
- Drainage of ponds and decorative reservoirs - When seasonally cleaning the pond, changing the water or removing sediment from the bottom.
- Garden and drainage work - Pumping water out of pits for foundations, septic tanks, expansion pools, manholes, drainage ditches.
- Land and farm applications - emptying rainwater tanks, barrels, small reservoirs for technical water.
The SP 4001 pump is therefore an all-purpose tool for all jobs where fast, efficient and as trouble-free as possible evacuation of dirty water from hard-to-reach areas is required.
SP 4001 OB-SP4001 submersible dirty water pump - performance, power and durability
The SP 4001 combines high performance with compact dimensions and economical operation. The 400-watt motor ensures stable operation while not consuming excessive electricity, which is important for longer pumping cycles.
Product description
Submersible pump for dirty water sp 4001
Power 400W
Maximum output of 7500l/h
Maximum lifting height 5m
Maximum diameter of impurities 25mm
Hose connection 1" (25 mm) and 32 mm
Technical specifications:
| Engine power | 400 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Maximum output | 7500 l/h |
With a maximum head of 5 m, the pump can pump water to a higher level - for example, from a basement to the first floor of a building or from a trench to a nearby ditch. With a capacity of 7,500 l/h, a significant amount of water can be removed in a short period of time, which is crucial when fighting flooding.
The housing of the device is made of durable materials resistant to corrosion and contaminated water. The design ensures stable operation even in harsh conditions, and properly selected seals protect the motor from moisture, extending the life of the pump.
Operating comfort and safety of the SP 4001 submersible pump
DRAINAGE WATER PUMP SP 4001 OB-SP4001 has been designed with domestic users in mind, so its operation is simplified as much as possible. Simply connect the appropriate hose to the discharge port, submerge the pump in the tank, and plug the power cord into a standard 230-volt outlet. Compact dimensions and a convenient handle make it easy to transport and position the device in hard-to-reach places - for example, in a narrow well.
Safety at work is ensured by m.in. sealed construction and adaptation to 230 V / 50 Hz mains power supply. The pump is suitable for typical domestic and outdoor conditions, such as increased humidity or occasional contact with dirt.
User benefits - why choose the SP 4001 OB-SP4001 DRAINAGE WATER PUMP?
- Saving time - high efficiency of 7500 l/h allows to empty a flooded room or tank in a short time.
- Universal application - copes with dirty water, containing solid contaminants up to 25 mm, making it suitable both at home and in the garden or on construction sites.
- Simple installation - 1" (25 mm) and 32 mm connections allow easy connection of hoses with standard diameters.
- Mobility - compact housing and carrying handle give you the ability to quickly move the pump to another location according to your current needs.
- Economical work - 400 W power provides a favorable ratio of energy consumption to real pumping capacity.
FAQ - Frequently asked questions about the SP 4001 OB-SP4001 submersible dirty water pump
1. Can the SP 4001 pump be used to pump clean water?
Yes, the pump can handle both clean and dirty water. However, it is designed primarily for contaminated water, so its design and contaminant passage of up to 25 mm is particularly well suited for water with sand, silt or organic debris.
2. What is the maximum water head?
The maximum head of the SP 4001 pump is 5 m. This means that the pump can pump water to a level higher up - for example, from the basement to the first floor of a building or from an excavation to a drainage ditch above the level of the pump.
3. What diameter hose can I connect to the pump?
The pump is equipped with a 1" (25 mm) and 32 mm hose connection. This allows you to use typical garden hoses and discharge hoses used in households, workshops or small construction companies.
4. What size of debris can the pump pump?
The maximum diameter of the dirt is 25 mm. This means that the pump can handle small pebbles, leaf fragments, sand or other small solids present in the water.
5. Is the pump suitable for continuous operation?
The SP 4001 pump is designed for periodic pumping out of dirty water - for example, when flooding or emptying the tank. Continuous operation time depends on ambient conditions (temperature, water level, pollution). It is recommended to turn off the device after pumping and let it cool down, which will prolong its life.
6. How the SP 4001 pump is powered?
The pump operates using standard mains voltage of 230 V and frequency of 50 Hz. Requires connection to a grounded electrical outlet. The motor power is 400 watts, which guarantees good performance with low power consumption.
7. Does operating the pump require special skills?
No, operation of the pump is intuitive. Just connect the hose, immerse the pump in water, make sure it stands steady, and then connect it to the mains. It is recommended that you familiarize yourself with the instruction manual and follow basic safety rules when working with electrical equipment.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.