POWER BANK MOBILE POWER STATION OLEO-MAC PSI 1650 65019006
- Oleo-Mac PSI 1650 power bank (1024 Wh, 1650 W) is a professional mobile power station for home, workshop and camping. Silent, emission-free power source with 3000 cycle LFP battery, 3x230V, USB, 12V. Ideal for power failures.
ENERGY BANK Mobile power station OLEO-MAC PSI 1650
The portable power station can be used to charge various electronic devices or use electrical equipment at home (e.g. during an emergency), but also in the open air, during trips or on camping trips. Quiet and effective support in power outage situations. Easy to operate and low maintenance.
It is equipped with several USB sockets (three type A and two type C), three 230 V AC outputs and one 12 V DC output. It can be charged using a wall socket (230 V) or a car charger (12 V) - both connectors are included as standard.
- LFP (lithium iron phosphate) battery with overheat protection, supports up to 3,000 full charge cycles.
- The display shows various information, such as the remaining state of charge, or the instantaneous load or input charge.
- LED light on the front, easy to use, for ambient lighting.
- Possibility of charging with 12V voltage from the car.
- 3 USB type A sockets
- 3 USB Type-C slots
- 1 12V socket
- 3 230V outlets (max input. 1200W)
Technical specifications:
| Battery data | LFP (lithium iron phosphate, 1024 Wh capacity) battery with overheat protection, up to 3000 charging cycles with high efficiency. |
| Rated power | 1650 W |
| Maximum power | 2700 W (so-called peak power) |
| Charging time | about. 1.5 h (for 230 V mains) |
| Weight | 13 kg |
| Dimensions | 336 x 286 x 263 mm |
| Capacity | 1024 Wh |
| Additional features | car socket charging 1 x 12.6V 10A (120W max).), solar charging input 11V-55V 10A (up to 500W) - NOT AVAILABLE IN OUR STORE |
What is a power bank Oleo-Mac PSI 1650 mobile power station 65019006?
The Oleo-Mac PSI 1650 power bank is an advanced portable power station with a capacity of 1024 Wh and a power rating of 1650 Watts. It is a fully self-contained, low-noise power source that combines an efficient lithium-iron-phosphate (LFP) battery, a power inverter and an extensive output panel. This allows the device to simultaneously power a number of 230-volt consumers, 12-volt devices and USB-powered electronics.
In practice, this means that the Oleo-Mac PSI 1650 is an alternative to a traditional generator - but without the exhaust fumes, noise and need for refueling. It will work well as an emergency power source at home, mobile power supply at the allotment, workshop, car, camper or camping site. With a compact design and weighing only 13 kg, it can be easily taken anywhere access to the power grid is limited or impossible.
Where to install and how to use the Oleo-Mac PSI 1650 mobile power station?
Oleo-Mac PSI 1650 is a fully portable unit - it does not require permanent assembly or complex electrical installation. Simply set the station on a stable, dry surface, connect the devices to the appropriate output jacks, and turn on the power with the ON/OFF button. With integrated transport handles, the equipment can be conveniently moved between rooms, put in the trunk of a car or taken on trips.
The station can work:
- home - In the living room, basement, garage, as an emergency power source for electronics/appliances, routers, CO pumps or lighting,
- at work and in the workshop - For powering power tools, charging machine batteries or backing up computer and measuring equipment,
- outdoors and camping - As a central power point for a travel refrigerator, lighting, audio equipment, phone and laptop chargers,
- in the car, camper and boat - thanks to the possibility of charging from a 12-volt socket, the station perfectly complements the on-board installation.
To charge the power bank, all you need is a classic 230-volt outlet or a 12-volt car cigarette lighter socket. Once fully charged, the station is ready to work anywhere - no permanent connection to the mains required.
The most important advantages of Oleo-Mac PSI 1650 - power of 1650 W, capacity of 1024 Wh and operation up to 3000 cycles
Oleo-Mac PSI 1650 is distinguished by a very favorable combination of power and capacity, which translates into real benefits for the user. Rated power 1650 watts i peak power 2700 watts allow running devices with higher power consumption, such as power tools, electric grills, kettles or small compressors. This ensures that the power bank is not limited solely to sensitive electronics.
Capacity 1024 Wh allows multiple charging of smartphones, tablets, laptops and long-lasting power supply for LED lights, travel refrigerator, router or home appliances. For example:
- smartphone (4000 mAh battery) - even a dozen full charges,
- laptop with 60 watts of power - several hours of work without access to the network,
- lED lighting 10 W - dozens of hours of uninterrupted illumination.
Used lithium-iron-phosphate (LFP) battery provides up to 3,000 full charge cycles while maintaining high efficiency. This means many years of intensive use without a noticeable drop in capacity. LFP cells are also much more resistant to overheating and damage than classic lithium-ion batteries, which increases the level of safety in use.
Versatile use - home, camping, outdoor work and emergency power supply
Thanks to its extensive output panel and high power, the Oleo-Mac PSI 1650 will perform well in many everyday situations. This is a practical solution for people who want to become independent of the power supply from the grid and protect themselves from the effects of power outages.
Home applications:
- sustaining the router's operation, so that in the event of a power failure, you can continue to use the Internet,
- powering a TV, set-top box, console or audio equipment - ideal for short-term power outages,
- emergency lighting of the premises and maintaining the operation of small household appliances.
Outdoor and camping applications:
- powering a travel refrigerator, electric kettle, small induction hob or coffee maker,
- charging phones, cameras, drones, Bluetooth speakers and other mobile devices,
- lighting of a campsite, gazebo or work tent using LED lights.
Professional applications:
- powering power tools on a construction site where there is still no electrical system,
- remote work in the field - supporting the work of a laptop, mobile printer, scanner, measuring equipment,
- emergency power supply for monitoring systems, pumps, automatic gates or emergency lighting.
Expanded outlet panel - 3 x 230 V, multiple USB ports and 12 V output
One of the key strengths of the Oleo-Mac PSI 1650 is its rich set of outlets, which allows simultaneous connection of multiple devices with different power consumption. This allows the station to serve as a central power source for all equipment used at the site.
- 3 230 V AC outlets - Ideal for connecting classic plugs of home and workshop appliances, such as computers, televisions, power tools, kettles or power tool chargers,
- 3 USB type A sockets - For fast charging of smartphones, tablets, sports cameras, Bluetooth speakers,
- 3 USB Type-C slots - Conveniently power modern laptops, portable consoles, powerbanks and other devices that support the USB-C standard,
- 1 12 V DC socket - for powering automotive equipment, compressor refrigerators, pumps or 12-volt lighting.
Such a rich configuration of outlets makes the power bank perfect for use as a home or mobile "power center". You can simultaneously charge household phones, power lights, work on your laptop and use small household appliances or power tools.
Quickly charge 1.5 h, charge from a 12-volt car and be ready to go anytime
One of the biggest advantages of the PSI 1650 is the very short charging time. Plugged into a 230-volt outlet, the station is able to fully charge the battery in about 1.5 hours. This is extremely important in emergency situations - when you expect power outages, you can quickly prepare in advance.
With the ability to charging from a 12-volt socket in the car the station is the perfect companion for long journeys, off-road trips and campervan trips. Just plug it into the cigarette lighter socket so that it will replenish power while driving and be ready to go when you reach your camping or construction site.
This combination of functionality makes the Oleo-Mac PSI 1650 perfect for active, mobile business owners, as well as for technical services, service crews or outdoor event organizers who need a reliable power supply anywhere.
Safety, operating convenience and robust design of Oleo-Mac PSI 1650 power station
Oleo-Mac PSI 1650 is designed for intensive use and maximum safety. The LFP battery is not only durable, but also resistant to overheating - an electronic circuit controls temperature and operating parameters, minimizing the risk of damage. This is especially important during prolonged loading or operation at higher ambient temperatures.
On the front of the device there is easy to read display, which shows the current state of charge of the battery, the instantaneous load and the charging power. This allows you to control your energy consumption at any time and predict the time of remaining operation. Built-in lED lighting allows convenient use of the station after dark - both at home and in the field.
The station's housing is compact (336 x 286 x 263 mm) and sturdy, and the integrated transport handles make the device easy to carry. With a weight of 13 kg, one person can easily carry the power bank from the car to the house, to the allotment or to the tent.
Technical data Oleo-Mac PSI 1650 - summary
- Product type: power bank / mobile power station
- Model: Oleo-Mac PSI 1650
- Battery capacity: 1024 Wh (LFP - lithium-iron-phosphate battery)
- Battery life: up to 3,000 full charge cycles
- Rated power: 1650 W
- Maximum (peak) power: 2700 W
- Charging time from 230 V mains: about. 1,5 h
- Input power supply: 230 V AC, 12 V DC (car socket)
- Outputs: 3 x 230 V AC, 3 x USB-A, 3 x USB-C, 1 x 12 V DC
- Additional features: display of operating parameters, LED lighting, protection against overheating
- Weight: 13 kg
- Dimensions (L. x width. x height.): 336 x 286 x 263 mm
- Product code: 65019006
- EAN code: 8026619110208
FAQ - Frequently asked questions about Oleo-Mac PSI 1650 power bank
1. What can I power with the Oleo-Mac PSI 1650 station?
The power bank successfully powers most home and travel devices up to 1650 watts (with brief spikes to 2700 watts). You can connect m.in. laptops, TVs, travel refrigerators, power tools, LED lighting, routers, audio equipment or small appliances, as well as charge phones and other mobile devices via USB.
2. How long the station can run on a single charge?
Operating time depends on the total power consumption of the connected devices. With a light load (e.g., a few LED lights and a Wi-Fi router), this can be many hours of continuous operation. With a heavier load, such as power tools or a kettle, the working time will be shorter, but sufficient to complete the planned tasks. 1024 Wh capacity allows you to flex your usage to suit your current needs.
3. How to charge the Oleo-Mac PSI 1650 power bank?
The device can be charged in two ways: from a 230 V mains socket (charging time approx. 1.5 h) and from the car's 12-volt socket. This makes it easy to replenish your energy both at home and on the go. The technical description also provides for the possibility of charging with solar panels (11-55 V, up to 500 W), but this option is not available in the configuration offered in our store.
4. Is the power station noisy during operation?
Compared to traditional generators, Oleo-Mac PSI 1650 operates very quietly - it does not generate exhaust fumes or noise associated with the internal combustion engine. This makes it ideal for use at home, at the campsite or at night, without disturbing householders or neighbors.
5. How long will the LFP battery last in this station?
The lithium-iron-phosphate battery used is rated for about 3,000 full charge cycles while maintaining high efficiency. This means many years of reliable operation, even with regular intensive use. Additional electronic protections protect the battery from overheating and overloading.
6. Do I need special knowledge to use this device?
Not. Operating the Oleo-Mac PSI 1650 power bank is intuitive. All you need to do is charge the station, plug the devices into the appropriate outlets, turn on the power and monitor the parameters on the display. Clear markings for sockets and buttons, as well as an easy-to-read screen, mean that even less experienced users can cope with operation.
7. For whom this mobile power station is especially recommended?
Oleo-Mac PSI 1650 is the ideal choice for people who need an independent and reliable source of energy: owners of single-family houses, plots of land and cottages, RV users, camping enthusiasts, construction and maintenance crews, organizers of outdoor events, as well as anyone who wants to protect themselves in case of power grid failure.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.