- OPENING KIT FOR MB 900 56062004 - professional accessories for MB 900 sprayers. Enables precise spreading of powders, granules and seeds. Large 27 l tank, 5 nozzles, quick installation. Ideal for orchards, plantations and gardens.
OPPOSITION KIT FOR MB 900 56062004 is a specialized set of accessories, designed to work with MB 900 series diesel sprayers. Allows precise spreading of crop protection products available in powder, granular agents and seeds, significantly increasing the functionality of a standard sprayer. With a large 27-liter tank and a set of 5 calibrated nozzles, the user gains full control over the application rate and coverage, resulting in higher treatment efficiency and optimal material consumption. DUSTING KIT FOR POWDER AND GRANULAR AGENTS: Ideal for spreading materials available in powder or granular form and seeds, equipped with a 27-liter tank and 5 calibrated nozzles to control the flow rate. What is the OPPOSITION KIT for MB 900 56062004? This is a factory add-on kit for the MB 900 sprayer/sprayer that transforms a traditional liquid sprayer into a powerful device for spraying powders (e.g., sulfur), granular agents (fertilizers, insecticides, granular herbicides), and for sowing small seeds. The kit consists of a large chemical-resistant plastic tank, flexible hoses, mounting adapters, calibrated nozzles and fasteners. Where do you mount the OPENING KIT for the MB 900 56062004? The set is mounted directly on the body of the MB 900 sprayer, in the place provided by the manufacturer at the factory. The tank is set on the frame of the device, and the hoses and nozzles are connected to the air duct of the sprayer. Thus, the airflow produced by the MB 900 carries the powder or granules to the plants or the growing surface. Installation is simple and intuitive - it relies on clamps, bands and adapters included in the kit, allowing the machine to be quickly converted from liquid to spray mode. Application of the set: - precise dusting of plants with powdered agents (e.g. against fungal diseases), - spreading granular mineral and foliar fertilizers, - application of insecticides and herbicides in granular form, - sowing of small seeds (e.g., grasses, cover crops, catch crops) on small and medium areas, - protective treatments and fertilization in orchards, forest nurseries, vegetable crops and home gardens, - work in greenhouses, plastic tunnels and communal green areas. User benefits: - significantly increase the functionality of the MB 900 sprayer - one machine for spraying and dusting, - time saving - large 27 l tank reduces the number of breaks for refilling, - precise control of the application rate thanks to 5 calibrated nozzles, - even, long-range application coverage thanks to the use of the MB 900's powerful air flow, - high durability and resistance to typical chemicals used in agriculture and horticulture.
DIPPING KIT FOR MB 900 56062004 - precise application of powders and granules in demanding crops

Durable design and reliable performance of the MB 900 dusting kit in daily operation

Easy installation and convenient operation of the dusting kit for the MB 900 - maximum functionality from one machine

The most important technical and performance features of the dusting kit for MB 900

- Tank capacity: 27 liters - provides long, uninterrupted operation with a single fill, ideal for medium and larger acreages.
- Number of nozzles: 5 calibrated nozzles to control the flow - allows you to match the application rate to the type of material, weather conditions and planting density.
- Purpose: powders, granular agents, fine seeds - a wide range of materials used in agriculture, horticulture and landscape care.
- Compatibility: mB 900 series sprayers/blowers - a complete, original set dedicated to a specific device.
- Construction: resistant plastic tank, flexible hoses, mounting clamps and ties, air duct adapter, replacement nozzle set.
- Service: quick assembly and disassembly, convenient filling and cleaning, easy dose adjustment with nozzles.
- Application: orchards, berry plantations, vegetable crops, nurseries, home gardens, urban green areas.
- Product code: 56062004
- EAN: 8026619062217
FAQ - Frequently Asked Questions about the MB 900 Dusting Kit 56062004
1. What device does the MB 900 OPENING KIT fit into 56062004?
The kit is designed to work with MB 900 series sprayers/blowers. This is a dedicated set, whose mounting components and adapters are tailored to the construction of this model.
2. What materials can I spread with this kit?
OPPOSITION KIT FOR MB 900 56062004 is suitable for the application of powders (e.g. fungal disease control agents), granular agents (fertilizers, pesticides) and small seeds, such as grasses or post-harvest crops.
3. How big is the tank and for how long does it last?
The tank has a capacity of 27 liters. The operating time per fill depends on the type of material and the selected calibrated nozzle, but in practice it allows you to perform many treatments without frequent refills.
4. Is the assembly of the set complicated?
Installation is relatively simple and intuitive. This uses the included clamps, bands and adapters. If the manufacturer's recommendations are followed, the whole operation can be carried out by yourself in a short time.
5. Does the set require special maintenance?
After the work is completed, it is recommended to empty the tank and hoses of residual material and clean them. Regular maintenance of the condition of the nozzles and hoses will maintain high precision application and long life of the kit.
6. Is it possible to regulate the amount of dumped material?
Yes. The kit is equipped with 5 calibrated nozzles that control the flow, so the operator can choose the right dose for the specific task, type of preparation and working conditions.
7. Where this set is most often used in practice?
The most common areas of application are orchards, berry plantations, vegetable crops in the ground and in tunnels, nurseries of ornamental trees and shrubs, home gardens and urban green spaces, where even and precise distribution of powders, granules and seeds is required.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.





