PUMP FOR MB 800 365200273CR
- Genuine high-pressure pump POMPA FOR MB 800 365200273CR for MB800 and AM162 sprayers. Increases the spraying range, ensures even spray distribution, saves resources and reliable work in orchard, garden and disinfection. EAN 8026619083441.
PUMP FOR MB 800 365200273CR - professional high pressure pump for MB800 and AM162 sprayers
Pump for MB 800
Pump that allows the liquid to be delivered at maximum pressure, greatly increasing the range.
This kit is used as an optional accessory for the MB800 Sprayer.
This kit comes standard with the AM162 Sprayer.
What is the MB 800 PUMP 365200273CR and why you should choose it?
MB 800 PUMP 365200273CR is a high-quality liquid pump designed for use with MB800 and AM162 series diesel and electric sprayers. Its main task is to increase the working pressure of the spray liquid, which directly translates into greater spray coverage, better atomization and even surface coverage. Thanks to its precise design and refined flow rate, the pump makes efficient use of every liter of working medium, reducing wastage and increasing work efficiency.
The body of the pump is made of resistant plastic that stands up well to contact with water and commonly used pesticides and disinfectants. The pump is lightweight yet sturdy, which makes it easy to install, move and operate in difficult field conditions - in an orchard, garden, greenhouse or vegetable farm.
For the user, this primarily means:
- greater spray coverage without having to get close to the area being sprayed,
- the ability to work on taller trees, building facades, in hard-to-reach corners,
- saving time - one pass allows to cover a larger area,
- stable, repeatable pressure, which translates into an even spraying effect.
Where the pump is mounted PUMP FOR MB 800 365200273CR - compatibility with MB800 and AM162 sprayers
The MB 800 Pump 365200273CR is designed specifically for installation in sprayers:
- MB800 - as an optional extra, which significantly increases the operating parameters of the device,
- AM162 - As a piece of serial equipment, playing a key role in the liquid feed system.
It is installed in the fluid circuit between the tank and the spray section (lance, nozzles or nozzle set). Properly shaped inlet and outlet ports allow the pump to be quickly plugged into the existing system using the hoses provided for the sprayer model. This makes replacing an old or worn out pump with a new one simple and does not require specialized tools.
Typical examples of assembly applications:
- Service and repair of the MB800 sprayer - in case of pressure drop, uneven flow or visible leaks, replacing the pump with a new one 365200273CR restores full efficiency of the device.
- MB800 sprayer modernization - the addition of a pump as an optional accessory allows you to increase the working range, which is especially important in high orchards, ornamental tree care or hedges.
- Keeping the AM162 sprayer in optimum condition - use of the original pump dedicated to this model guarantees that the pressure and performance will be in accordance with the manufacturer's specifications.
Professional use of the MB 800 365200273CR pump in daily work
The pump for MB 800 365200273CR, thanks to its ability to supply liquid under high pressure, works well wherever accurate, efficient and uniform liquid application is required. This applies to plant protection products as well as disinfectant fluids or foliar fertilizers.
Most common areas of use:
- Agriculture and horticulture - Spraying fruit trees, berry bushes, vegetable plantations or ornamental plants. The high pressure ensures that the droplets are better dispersed and that the product reaches the underside of the leaves and the depth of the tree crown.
- Home and allotment gardening - Regular protection of ornamental plants, conifers, lawns from diseases and pests, as well as the application of foliar fertilizers to improve the condition of plants.
- Disinfection of facilities - use of disinfectant liquids in outbuildings, greenhouses, foil tunnels, warehouses or livestock facilities where even application of the product is crucial to the effectiveness of the treatment.
In each of these applications, the pump is responsible for:
- maintaining constant pressure,
- stable flow of the working fluid,
- effective and safe use of preparations.
Key features of the MB800 / AM162 sprayer pump for MB 800 365200273CR
In order to best match the product to your needs, it is worth highlighting the most important features of the pump POMPA DO MB 800 365200273CR from the point of view of daily operation:
- High operating pressure - the pump is structurally designed to operate at the maximum pressure for the sprayer type. This allows you to increase the range of the jet, which is especially important when spraying tall trees and building facades. The user can perform treatments from a safe distance, standing on the ground, without using a ladder.
- Resistant body material - durable plastic resistant to contact with water and chemicals extends the life of the pump and minimizes the risk of corrosion or seizure of components. Even with regular operation in harsh field conditions, the pump maintains its performance for a long time.
- Simple installation and operation - well-thought-out arrangement of ferrules and compact dimensions make the replacement or installation of the pump does not require specialized service. This is important especially during the season, when every day without downtime at work counts.
Examples of daily use:
- the farmer replaces the worn pump on the MB800 sprayer with a new 365200273CR before the spraying season and gains an even spray across the width of the tree row,
- the owner of an amateur orchard uses a pump in a set with an AM162 sprayer to protect stone and pome trees, maintaining adequate pressure during treatments,
- the administrator of a storage facility uses a sprayer with this pump to apply disinfectants to walls, floors and hard-to-reach corners.
Technical and identification data PUMP for MB 800 365200273CR
Key product identification information has been collected below to facilitate replacement part selection and order processing:
- Product name: PUMP FOR MB 800 365200273CR
- Purpose: liquid pump for MB800 (optional equipment) and AM162 (standard equipment) sprayers
- Type of device: high-pressure pump for working fluids (water, crop protection solutions, disinfectants, foliar fertilizers - as recommended by the sprayer manufacturer)
- External system code / part number: 365200273CR
- EAN: 8026619083441
- Body material: corrosion- and chemical-resistant plastic
- Connections: ferrules for connecting flexible hoses in the liquid system of the sprayer (input / output)
- Application: agriculture, horticulture, gardening, disinfection of objects, cleaning work with the MB800 / AM162 sprayer
Using an original pump with the correct part number is key to maintaining the sprayer's performance and user safety. Replacements of unknown origin may not provide adequate pressure, tightness or compatibility of connections.
Key benefits for the user of the pump for MB 800 365200273CR
Choosing an original pump POMPA DO MB 800 365200273CR is an investment in reliability and comfort. From the user's point of view, the most important advantages are:
- Significantly increased spraying range - the possibility of conducting treatments on higher objects (trees, facades of buildings) without additional equipment. Spraying range translates directly into shorter working time and less operator fatigue.
- Better surface coverage - high pressure promotes uniform spraying of the spray and more accurate reaching of hard-to-reach plant fragments, which increases the effectiveness of plant protection products and disinfectant preparations.
- Saving on chemicals - uniform distribution of the liquid reduces excessive wetting of some zones and the resulting loss of the product. This is not only an economic benefit, but also a reduced environmental burden.
- Hassle-free service and fast replacement - simple installation allows you to replace the pump on your own, even during the busy season, without having to wait for a long time for service.
In practice, this means that the user of the MB800 or AM162 sprayer, investing in the pump 365200273CR, gains not only a new spare part, but, above all, the guarantee of stable, efficient and comfortable work during all protective and disinfecting treatments on the farm, garden or service company.
FAQ - Frequently asked questions about MB 800 PUMP 365200273CR
1. Does the MB 800 365200273CR pump fit on any sprayer?
Not. The pump is designed specifically to work with sprayers MB800 (as an optional accessory) and AM162 (standard equipment). Before buying, it is a good idea to check the model of your device and the part number to be sure of full compatibility.
2. Can I replace the pump on my sprayer myself?
Yes, in most cases, replacing the pump is a simple and do-it-yourself activity. Simply disconnect the hoses from the old pump, remove it from its mounts, and then connect the new pump 365200273CR in reverse order. However, always follow the instruction manual for your specific sprayer model and use caution.
3. What liquids can I use with this pump?
The pump is designed to work with water and solutions of plant protection products, disinfectants and foliar fertilizers recommended by the sprayer manufacturer. Before use, always check that the product is approved for use on the type of sprayer and that it does not react with the material of the pump components.
4. Which means the pump increases the spraying range?
By operating at high pressure, the pump enables the creation of a stronger jet of liquid, which is able to reach further from the nozzle. In practice, this means you can spray on taller trees, larger shrubs or building facades without having to get close to the object being sprayed or use a ladder.
5. How to take care of the pump to make it last as long as possible?
After operation, it is recommended to flush the system with clean water, which removes residual chemicals that can damage pump components over time. In winter, protect the pump from freezing of the liquid inside the body - it is best to drain the system and store the device in a dry, positively heated room.
6. Is the EAN number 8026619083441 valid when ordering parts?
Yes, EAN number makes it easier to uniquely identify the product in sales systems. Specifying it at the time of ordering allows you to complete the purchase of the right pump more efficiently and without confusion PUMP FOR MB 800 365200273CR.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.