FOGGER 365200203A
- FOGGER 365200203A is a professional fogging kit for MB800 and AM162 sprayers. Provides a very fine mist, uniform plant coverage, less use of protection products and high spraying efficiency. Ideal for orchards, berries and greenhouses
FOGGER 365200203A - professional fogging for MB800 and AM162 sprayers
FOGGER 365200203A is a specialized fogging kit designed to work with combustion sprayers, which significantly increases the effectiveness of each plant protection treatment. Enables optimum fogging of liquids at the outlet, thus enabling accurate spraying and preventing waste of spray agent. This kit is used as an optional accessory for MB800 sprayer. This kit comes as standard equipment AM162 sprayer. Thanks to the precise spraying of the spray, you gain an even coverage of the plants with a minimum use of the product.
It is the ideal solution for demanding users - orchardists, gardeners, contractors and farms that expect from spraying not only efficiency, but also economy and comfort of work. The fogger allows you to create a very fine mist that penetrates deeply into the plants, also reaching hard-to-reach places, such as the underside of leaves or dense crowns of trees and shrubs.
What is ZAMGULATOR 365200203A and how it works on MB800 and AM162 sprayers?
FOGGER 365200203A is a complete fogging kit mounted on the outlet of the sprayer. Its task is to transform the traditional jet of liquid into a fine, uniform mist (working aerosol) that settles on the sprayed surface as a thin, highly effective layer of protective agent. This solution makes it possible to reduce the unit amount of liquid while maintaining or increasing the effectiveness of the treatment.
The key feature of the set is a specially designed fogging nozzle and shield, which direct the air and liquid flow in such a way that it is possible to obtain:
- Very fine drops - Better coverage of the plant surface, greater effectiveness of the preparation.
- Stable spray cone - Controlled direction and range, less loss and wind drift of liquid.
- Consistent spray quality - Repeatability of parameters in subsequent treatments.
In practice, this means that the fogger works well in protecting orchards, greenhouses, plastic tunnels, as well as in the care of urban greenery. Where precision, reproducibility and reducing the cost of chemical preparations are important, the 365200203A kit becomes an invaluable support for daily work.
Installation of the CLOSER 365200203A - where and how to install it?
The 365200203A CAPABLE is designed for quick and easy installation on the the air/liquid outlet of the sprayer. The kit is compatible with:
- MB800 sprayer - As optional equipment, installed additionally if the user wants to achieve the fogging effect.
- AM162 sprayer - As a standard equipment item, factory provided to work with this model.
A typical installation includes:
- Placement of the fogger body at the outlet of the sprayer discharge pipe.
- Fixing the clamp fixing that stabilizes the set and prevents it from moving during operation.
- Liquid line connection supplying the spray agent to the fogging nozzle.
- Check for leaks and adjust spray direction as recommended by the sprayer manufacturer.
Depending on the model of the sprayer, the installation may differ in details, but the general principle remains the same - the fogger works at the end of the spray system, exactly where the air and liquid flow leaves the device. With this, you can:
- Transform a standard sprayer into a efficient fogger for protective treatments.
- Quickly switch between classic spraying and fogging modes (for demountable models).
- Adjust the working parameters according to the type of crop, plant height and specificity of the preparation.
Examples of practical applications:
- Apple orchard - you mount the kit on the MB800 to get a very fine mist reaching inside the tree canopy.
- Foil tunnel with tomatoes - thanks to the fogger on AM162 you ensure even distribution of the fungicide.
- Blueberry or currant plantation - Easier coverage of dense shrubs with a minimum amount of liquid.
Application of fogger 365200203A - precise spraying without wasting agent
The biggest advantage of the FOGGER 365200203A is the possibility of obtaining optimum fogging of liquids at the outlet from the sprayer. This allows the spray agent to be deposited on the plants in the form of very fine droplets, which significantly increases the surface area in contact with leaves and stems, while reducing the total amount of liquid used.
Applications:
- Protection of orchard plants - Apple trees, pear trees, cherry trees, plum trees, apricot trees, peach trees.
- Berry crops - blueberry, raspberry, currant, gooseberry, blackberry.
- Vegetable farming in tunnels and greenhouses - tomatoes, peppers, cucumbers, lettuce, herbs.
- Urban and decorative greenery - flower beds, ornamental shrubs, hedges.
- Disinfection and decontamination of farm premises (depending on the recommendations of the sprayer manufacturer and the preparations used).
User benefits:
- Thorough spraying - The mist penetrates into the dense parts of the plants, reaching where the classic stream may not be enough.
- Saving on security measures - smaller doses while maintaining high treatment efficiency.
- Higher work efficiency - quick treatment of a large area with a single pass.
- Better control over liquid drift - fine mist and proper jet orientation reduces wind loss.
Sample daily scenarios:
- The farmer performs an evening spray against fungal diseases in the orchard - thanks to the fogger, he achieves an even mist, and the amount of liquid used is less than with traditional spraying.
- Gardener in the greenhouse uses fogging of insecticide - the fog easily penetrates between plants, without causing excessive dripping of liquid on the ground.
- Urban greenery maintenance service company performs spraying of green belts and shrubs - high quality coverage with limited work time and preparation consumption.
The quality, durability and reliability of the CLOSER kit 365200203A
Fogger 365200203A is designed to meet the demanding work in agriculture and horticulture. Metal and plastic components were selected for resistance to chemicals, moisture, UV radiation and changing weather conditions.
Quality Features:
- Solid construction - Stable body, durable clamp attachment and precisely designed liquid flow components.
- Resistance to operation - set intended for multi-season use with proper maintenance.
- Compatibility with branded sprayers - cooperation with popular MB800 and AM162 models increases confidence in the overall system.
For the user, this means:
- Less risk of failure during busy spraying season.
- Lower service and parts replacement costs compared to cheaper, non-original solutions.
- Confidence that the fogging parameters will remain stable for a long time.
The fogger will be ideal for:
- Orchard farms focused on quality commodity production.
- Professional nurseries of ornamental plants, where the precision of each treatment counts.
- Organic farms, where it is important to reduce the number of agents used while maintaining the effectiveness of protection.
Technical and product identification data CLAMMER 365200203A
Below is important identifying information to help you select and order the right kit:
- Product name: FOGGER 365200203A
- External system code/index: 365200203A
- EAN product codes: 8026619083434
- Purpose: fogging kit for MB800 (optional) and AM162 (standard equipment) sprayers
Technical data such as exact dimensions, weight or mounting diameter depend on the configuration of the sprayer and can be specified in its instruction manual. From a practical point of view, it is crucial that the fogger has been factory-fitted to the indicated models, which guarantees the proper tightness of the connection and the correct characteristics of the fog stream.
Thanks to the unique product code and EAN number, the user is assured of easy identification of a spare part or accessory, as well as avoiding confusion when purchasing further spray system components.
Why you should choose ZAMGULATOR 365200203A for your sprayer?
Selecting FOGGER 365200203A, you are investing in a solution that combines:
- Professional quality - Kit designed for intensive, daily use on farms and in the horticultural industry.
- Saving crop protection products - thanks to the optimal fogging of liquids at the outlet you minimize their loss.
- Effectiveness of treatments - thorough spraying allows to better protect crops from diseases and pests.
- Comfort of use - Easy installation and integration with MB800 and AM162 sprayers.
This solution is especially recommended for users who:
- They want to increase the the efficiency of the existing MB800 sprayer by retrofitting it with a fogging kit.
- They have AM162 and are looking for an original replacement or an additional set of fogging kit.
- They set their sights on professional, precision conservation treatments for orchards, berry and vegetable crops.
FAQ - Frequently Asked Questions about the CLOSER 365200203A
1. To which sprayers the ZAMGULATOR 365200203A fits?
The kit was designed primarily for sprayers MB800 (as an optional accessory) and AM162 (as part of standard equipment). For other models, check the compatibility of mountings and technical parameters in the sprayer manufacturer's documentation.
2. Does the fogger reduce the use of the spray agent?
Yes. By allowing optimum fogging of liquids at the outlet, the spray agent is distributed as a fine mist that better covers the plants. This makes it possible to achieve the same or better protective effect with less spray application.
3. Is the assembly of the set complicated?
Installation is relatively simple and comes down to fixing the fogger body on the sprayer outlet, screwing the fixing clamp and connecting the liquid line. However, it is recommended that you follow the sprayer's instruction manual and, if necessary, use an authorized service center.
4. For which treatments is it best to use the fogger 365200203A?
The fogger is particularly well suited for protective spraying in orchards, berry crops and in greenhouses and foil tunnels. It can also be used for disinfectant treatments if the sprayer and agent manufacturer allows such use.
5. How to take care of the fogger so that it serves for many seasons?
After each spraying cycle it is recommended flushing the system with clean water, checking the condition of the nozzle, seals and connections and storing the set in a dry place, away from aggressive chemical fumes. Regular maintenance will maintain the high quality of fogging and reduce the risk of unexpected downtime in operation.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.