PZU 25/35 UNIT AIR FILTER 180130117-0001
- PZU 25/35 generator air filter 180130117-0001 - dedicated foam cartridge for PZU 25/35 generators. Effectively traps dust and dirt, protects the motor, stabilizes power and extends the life of the device. Ideal for dusty environments.
PZU 25/35 aggregate air filter 180130117-0001 is a high-quality filter cartridge made of durable, multilayer technical foam. Its task is to effectively clean the air sucked in by the engine of a generator set of PZU 25/35 series from dust, dirt and fine impurities that can accelerate the wear of the drive unit and reduce its output. By regularly replacing the air filter, you ensure your unit's safe, stable operation and extend its lifespan.
What is the air filter of the PZU 25/35 unit 180130117-0001?
The air filter of the PZU 25/35 aggregate 180130117-0001 is an original consumable item suitable for use in demanding field conditions. It is made of durable foam of properly selected density, which effectively traps solid contaminants without restricting the free flow of air into the combustion chamber. Rectangular shape with rounded corners makes it easy to install in the factory air filter housing of the unit.
Thanks to the use of flexible material, the filter fits perfectly into the socket and creates a tight connection, minimizing the risk of unfiltered air entering the engine. It is a key component of the intake system, responsible for maintaining the proper purity of the fuel-air mixture, which has a direct impact on the genset's operating culture, fuel consumption levels and component durability.
Where the PZU 25/35 genset air filter is installed 180130117-0001?
PZU 25/35 genset air filter 180130117-0001 is installed in the air filter housing located at the internal combustion engine of the PZU 25/35 series genset. This is a standard filter housing, usually located on the side or above the engine, which is accessed by unscrewing or unfastening the cover.
In practice, installation takes place in a few simple steps:
- stop operation of the unit and wait for the engine to cool down,
- opening the air filter housing,
- removal of the used filter cartridge,
- cleaning the interior of the housing from accumulated dust,
- seating a new PZU 25/35 filter 180130117-0001 in the socket,
- close and thoroughly secure the case.
The filter is designed to work in the standard position provided by the genset manufacturer - no modifications or adjustments are required. As a result, the replacement can be done by the user himself, without the need for service.
Application of PZU 25/35 air filter 180130117-0001
PZU 25/35 air filter 180130117-0001 is primarily used in PZU 25/35 series generators, used by both residential and professional users. It is ideal wherever the unit is to work reliably in dusty environments, such as construction sites, farms, workshops, warehouses, recreational plots or outdoor events.
Thanks to its effective air purification, the filter:
- protects the engine from accelerated wear and tear,
- helps maintain stable speed and power of the aggregate,
- contributes to more fuel-efficient combustion,
- reduces the risk of failure due to contaminants in the intake system.
It is an ideal choice for those who want to keep their device in perfect working order, while reducing the cost of any future repairs.
PZU 25/35 genset air filter 180130117-0001 - quality, durability and reliability in daily operation
The air filter of the PZU 25/35 unit 180130117-0001 is designed for long-term, intensive operation. The foam structure with controlled porosity ensures effective retention of dust and sand particles, which is particularly important when working in open areas, on unpaved surfaces and in rooms with higher dust levels. Suitable elasticity of the material makes the filter retain its properties even with frequent removal and installation during inspections.
In the daily use of the aggregate, this means:
- less risk of power drops when operating under heavy load,
- stable power supply to electrical equipment connected to the genset,
- lower exhaust emissions due to the correct composition of the air-fuel mixture,
- less frequent need for costly engine repairs.
It will prove useful both in occasional use of the aggregate - for example, as an emergency power source for the house - and in professional applications, when the aggregate works several or more hours a day on the construction site or in the workshop. Regularly replacing the filter with a new model 180130117-0001 is one of the easiest and cheapest ways to extend the life of the entire unit.
User benefits - why choose this filter in particular?
By choosing a PZU 25/35 180130117-0001 genset air filter, you are investing in the safety and trouble-free operation of your equipment. The product has been matched to a specific type of unit, which eliminates the problem of incorrectly selecting a replacement with different dimensions or filtration parameters. Confident compatibility means quick installation and trouble-free use.
The most important benefits for the user are:
- Engine protection - effective air filtration reduces the entry of abrasive particles into the combustion chamber, which reduces wear on cylinders, pistons and valves.
- Higher operating culture of the aggregate - clean air contributes to RPM stability and easier starting, especially at low temperatures.
- Saving time and money - it is cheaper to change the filter regularly than to repair a damaged engine or buy a new unit.
In everyday use, the difference is felt primarily in reliability - a genset with a properly selected and clean air filter is less likely to "choke" during sudden changes in load, better responds to the start-up of large consumers (such as power tools or pumps) and provides stable voltage over longer operating cycles.
How to take care of the PZU 25/35 air filter 180130117-0001 to make it last as long as possible?
Although the PZU 25/35 air filter 180130117-0001 is a component designed for periodic replacement, its life depends largely on operating conditions and proper handling. With intensive operation of the unit in a dusty environment, it is recommended to regularly check the condition of the filter and, if necessary, clean it or replace it with a new one.
Examples of good operating practices:
- checking the condition of the filter every several hours of operation of the unit,
- removal of accumulated dust from the surface of the filter (according to the recommendations of the device manufacturer),
- not using strong detergents or solvents that could damage the foam structure,
- replacement with a new cartridge whenever the filter is visibly dirty, mechanically damaged or has lost elasticity.
By following these rules, you will ensure optimal working conditions for your generator and minimize the risk of sudden failures at the most inopportune moment - for example, during a power outage at home or during important work at a construction site.
Key features of the PZU 25/35 aggregate air filter 180130117-0001
- Dedicated to PZU 25/35 aggregates - Full compatibility with the intake system of these models.
- Effective filtration - foam structure traps dust, dirt and fine debris.
- Durable design - resistance to typical operating loads and temperature fluctuations.
- Easy installation - rectangular shape with rounded corners makes it easy to embed in the housing.
- Consumable cartridge - A cost-effective, quick service solution to improve genset operation.
Thanks to these features, the PZU 25/35 air filter 180130117-0001 works well in both domestic and professional applications, being one of the key elements of proper maintenance of the unit.
FAQ - Frequently asked questions about PZU 25/35 chiller air filter 180130117-0001
Question 1: How often should the air filter in the PZU 25/35 unit be changed??
The frequency of replacement depends on the intensity and operating conditions of the unit. For occasional use in a clean environment, inspection every few months and replacement once a season is usually sufficient. When working in a heavily dusty environment (construction, workshop, farm), it is a good idea to check the condition of the filter every ten or so hours of operation and replace it more often when it is visibly dirty.
Question 2: Can PZU 25/35 filter 180130117-0001 be cleaned and reused?
In some cases it is permissible to gently clean the filter from surface contaminants, according to the recommendations of the manufacturer of the aggregate. However, it should be remembered that it is a consumable component that loses its properties over time and should be periodically replaced with a new one to ensure maximum protection for the engine.
Question 3: How to recognize that the filter is suitable for replacement?
This is signaled by the m.in.: visible, deep soiling of the foam structure, perceptible decrease in the power of the aggregate, more difficult start-up, as well as any mechanical damage (abrasions, cracks, deformations). In such a situation, it is best to replace the filter with a new model 180130117-0001 as soon as possible.
Question 4: Will this filter fit other models of units?
The filter was designed primarily for PZU 25/35 series units. Its use in other models should be preceded by a careful comparison of the dimensions and design of the air filter housing. To avoid problems with fit and tightness, it is recommended to use the filter only as intended.
Question 5: Does changing the air filter yourself affect the warranty of the unit?
In most cases, regular replacement of consumable components, such as the air filter, is even required by the terms of the warranty. However, it is always a good idea to read the warranty card for a particular device and follow the manufacturer's instructions for servicing.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.