AIR PRE-FILTER OF PZU 25/35 UNIT 180130116-0001
- PZU 25/35 genset air pre-filter 180130116-0001 effectively traps dust and dirt, protecting the engine and main filter. Dedicated to PZU 25/35 units, ensures stable operation, lower fuel consumption and longer life of the unit. Ideal for p
Air pre-filter of PZU 25/35 genset 180130116-0001 - effective protection of the engine and longer life of the genset
Air pre-filter of PZU 25/35 unit - what it is and why it is so important?
Air pre-filter of PZU 25/35 unit 180130116-0001 is a specially designed operating element, whose task is to pre-clean the air sucked in by the unit. Made of high-quality, porous technical foam with the right density, it is the first barrier to dust, dust, sand particles and other airborne contaminants. This protects the essential air filter, combustion chamber and moving parts of the engine.
The use of a pre-filter significantly reduces the amount of contaminants reaching the interior of the unit, which translates into stable operation of the device, lower fuel consumption and longer life of the entire unit. This is especially important for intensive use of the unit in dusty conditions - on construction sites, in workshops, on farms or during service work in open areas.
Where the air pre-filter of the PZU 25/35 unit is installed 180130116-0001?
PZU 25/35 generator pre-filter 180130116-0001 is installed in the air intake system housing, directly before the main air filter, in PZU 25/35 series generators. Its location ensures that most contaminants are intercepted early in the air path to the engine, reducing the load on the primary filter and the risk of mechanical damage.
Installation is simple and does not require specialized tools - it usually comes down to opening the filter housing lid, removing the used cartridge, thoroughly cleaning the chamber of loose debris, and placing the new pre-filter in the correct slot. Thus, the replacement operation can be carried out by both a professional service technician and the end user, provided that the genset manufacturer's recommendations are followed.
Examples of typical filter installation and operation sites:
- PZU 25/35 generators used on construction sites - open field work, construction dust, cement, sand.
- Aggregates in mechanical workshops - presence of dust, filings and metalworking dust.
- Aggregates used in agriculture - soil dust, grain dust, airborne plant residues.
Use of the PZU 25/35 pre-air filter - safety and reliability in all conditions
PZU 25/35 genset air pre-filter 180130116-0001 is designed for intensive use of generators in demanding conditions. Its main use is to protect the intake system and internal combustion engine from excessive dust and premature wear. In practice, this means less frequent replacement of main filters, stable performance and lower service costs.
The filter will be ideal for the following applications:
- Construction and installation work - aggregate with additional air protection works without any problems near cutting machines, concrete mixers, grinders or drills that generate dust.
- Agriculture and horticulture - work at silos, drying facilities, grain stores, in fields and orchards, where a lot of dust and organic dust are in the air.
- Maintenance and repair services - emergency power supply for equipment during work in production halls, garages, as well as outdoors near unpaved roads.
- Municipal works - Powering equipment at maneuvering yards, near landfills, aggregate stockpiles or transportation bases.
Thanks to its simple and effective operation, the pre-filter allows the engine to maintain proper operating culture and reduces the risk of costly failures resulting from excessive fouling of the cylinders, valves or turbocharger (if present in the drive unit).
Key features and benefits of the PZU 25/35 aggregate pre-air filter 180130116-0001
When you choose the PZU 25/35 pre-filter 180130116-0001 air filter, you are investing in long-lasting and trouble-free operation of the unit. From the end user's point of view, the following features are key:
- High efficiency of pre-filtration - the structure of the foam has been selected to retain most of the larger dirt particles, while not excessively restricting airflow. As a result, the engine breathes freely, maintaining full power and stable rpm, even under prolonged load.
- Main and engine filter protection - The pre-filter takes on the first hit of dirt, so the main filter wears out more slowly. This is a real savings because the cost of the pre-filter is lower than the cost of the main components and service repairs.
- Simple and quick replacement - replacement of the cartridge does not require specialized knowledge or tools. In practice, this means that periodic service can be carried out without unnecessary downtime, and the unit is quickly back in operation.
- Durability of the material - the technical foam used is resistant to deformation and tearing with proper installation, which ensures longer life and preservation of filtering properties throughout its lifetime.
- Matching PZU 25/35 aggregates - the filter is designed as a dedicated component, which guarantees proper adhesion in the housing and effective sealing of the airflow path.
Examples of practical user benefits:
- A genset with a properly selected pre-filter can run longer in dusty environments without power drops or firing problems.
- Less frequent cleaning and replacement of the main filter means lower operating costs and less downtime.
- Reduced risk of engine damage translates into greater security of investment in generator set.
PZU 25/35 pre-air filter 180130116-0001 - operation, maintenance and best practices
To realize the full potential of the PZU 25/35 180130116-0001 pre-air filter, it's a good idea to follow some basic operation and maintenance rules. First of all, it is advisable to regularly check the condition of the filter - the frequency of maintenance depends on the intensity of operation of the unit and the dust level at the place of use.
Recommended Usage Practices:
- Regular visual inspections - before prolonged operation of the unit, it is worth checking whether the surface of the filter is not heavily soiled or clogged with coarse dust. Excessive contamination can cause power loss and start-up problems.
- Cleaning or replacement - when visibly dirty, the filter should be replaced with a new one, according to the recommendations of the manufacturer of the unit. To maintain full filtration efficiency, do not use aggressive chemicals or wash in a way that could damage the foam structure.
- Use of original parts - The use of a dedicated PZU 25/35 filter 180130116-0001 ensures proper flow parameters and efficiency of dirt retention, which has a direct impact on the safety of engine operation.
In everyday practice, this means that genset operators can plan work in advance without worrying about sudden stoppages due to clogged air intake systems. This is especially important in emergency power supply, when reliable operation is crucial for the safety of people and equipment.
Specification and purpose of the pre-air filter of the PZU 25/35 aggregate 180130116-0001
Basic product identification information is summarized below:
- Name: Preliminary air filter of PZU 25/35 unit
- Product code / external system code: 180130116-0001
- Purpose: pZU 25/35 series generators
- Function: pre-filtration of engine intake air, protection of the main filter and intake system
- Material: filter foam (prefill)
- Color: black
A well-chosen and efficient pre-filter is an essential part of caring for the condition of the unit. This is a small but key component that has a direct impact on the quality of engine operation, fuel consumption and reliability of the entire emergency power system.
FAQ - Frequently asked questions about PZU 25/35 pre-air filter 180130116-0001
1. How often should you replace the air pre-filter in the PZU 25/35 unit?
The frequency of replacement depends on the operating conditions of the unit. When working intensively in a dusty environment, more frequent checks are recommended - even every dozen or so hours of operation. When the filter surface is visibly dirty and clogged with dust, replace it with a new one. In lighter conditions, you can follow the aggregate manufacturer's recommendations for periodic inspections.
2. Can I clean the pre-filter instead of replacing it?
It is possible to gently clean the filter of loose dirt (e.g., by lightly shaking it out), but in order to maintain its full filtering efficiency, it is recommended to change it regularly. Washing with water or chemicals can damage the structure of the foam and reduce its performance, so it is safer to install a new cartridge.
3. Does this filter fit other models of units than PZU 25/35?
The filter was designed as a dedicated component for PZU 25/35 series units. Its use in other devices is possible only if the manufacturer explicitly allows such interchangeability or the dimensions and parameters of the filter are identical. For the safety of engine operation, it is recommended to use the parts provided by the manufacturer of the specific model of the unit.
4. How to recognize that the pre-filter is worn out?
Wear and tear of the filter is mainly evidenced by its visible dirtiness, clogging of the foam structure, as well as a noticeable decrease in the power of the aggregate, problems with maintaining even rotation or difficulty in starting up. In such situations, replacing the filter with a new one is necessary to avoid overloading the engine and further damage.
5. Why use the original air pre-filter 180130116-0001?
Original air pre-filter PZU 25/35 180130116-0001 is dimensionally and parametrically matched to the specific model of the unit. This ensures proper airflow, effective sealing and maximum filtration efficiency. Using genuine consumable parts is an investment in the reliability, safety and longer life of your generator set.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.