GUIDE FOR GPI 6 SAW OTH-GSKAKP6R16
- Original guide bar for GPi 6 cordless saw (new version), model OTH-GSKAKP6R16. Hardened steel, length 15 cm (6"), precise chain guidance, high durability and safe operation. Ideal for cutting branches and wood.
original guide bar for cordless saw (cutter) GPi 6 ; length 15 cm - 6". Applies to the new version of GPi6
156
Guide bar for GPi 6 OTH-GSKAKP6R16 chainsaw is an original working component for the new generation GPi6 cordless chainsaw. With a working length of 15 cm (6"), it is ideal for precise and safe cutting of branches, boards and other wooden parts in the home garden, orchard or do-it-yourself workshop.
The use of an original guide bar guarantees the highest compatibility with the device, stable chain guidance, extended life of the entire cutting set and full preservation of the technical parameters of the GPi6 saw. It's an investment in reliability, convenience and work safety - both for home users and professional gardening companies.
Original guide GPi 6 OTH-GSKAKP6R16 - what it is and why you should choose it?
The GPi 6 OTH-GSKAKP6R16 guide bar is a hardened metal structural component of the saw on which the cutting chain runs. She is responsible for:
- maintaining proper chain tension and position,
- stable and even cutting guidance,
- reduce friction and wear on the chain and drive.
Designation OTH-GSKAKP6R16 is the exact model code dedicated to GPi6 chainsaws in the new version. By choosing this particular model of guide, you are assured that:
- the spacing of the mounting holes perfectly matches the body of the saw,
- the oil channel coincides with the lubrication system of the device,
- working length of 15 cm provides optimal working conditions with the chain provided by the manufacturer.
In practice, this means fewer installation problems, no need to make up spacers, and complete safety of use - even during intensive cutting of fresh wood, hard branches, or structural elements made of dry wood.
Where the guide bar for the GPi 6 OTH-GSKAKP6R16 chainsaw is installed and how the replacement is done?
The OTH-GSKAKP6R16 guide is mounted in the front part of the GPi6 cordless saw, between the body of the machine and the nut / cover that holds the cutting set. It is at this point:
- the guide is slid onto the two main arbors,
- the cutting chain is inserted into the groove of the guide bar,
- the tensioner adjusts the proper chain tension along the entire length of 15 cm.
A typical guide bar replacement scheme for a GPi6 saw is as follows:
- Disconnect the battery from the chainsaw to ensure complete safety.
- Unscrew the nut or side cover, releasing the cutting set.
- Remove the used guide bar along with the chain and clean the socket of sawdust.
- Put the new OTH-GSKAKP6R16 guide on the mounting studs.
- Put the chain in the groove of the bar, taking care of the correct direction of the cutting teeth.
- Gently tighten the chain with the tensioner and tighten the cover.
- After the first few cuts, check the chain tension again.
Such a designed mounting system makes the replacement of the guide fast and intuitive even for less experienced users, and the risk of installation error is minimal.
The most important advantages and applications of OM Line guide for GPi 6 saw (model OTH-GSKAKP6R16)
OM Line guide for GPi 6 chainsaw is designed for heavy use in the garden and on the allotment. The most important features that any customer will appreciate:
- Optimum length 15 cm (6") - provides high comfort and safety for cutting branches typically up to 6-8 cm in diameter. Perfect for tree and shrub care, branch shortening, cutting smaller diameter firewood, and cleaning up after windstorms.
- Durable steel construction - the guide is made of strong, hardened steel resistant to abrasion and high temperatures generated during operation. This means longer service life, stable chain handling and less susceptibility to distortion even in longer work sessions.
- Precise chain guidance - carefully crafted guide groove minimizes the risk of chain fall, improves cutting quality and reduces vibration. This ensures that cuts are even and clean, which is important both when cutting wood structures and when caring for fruit trees.
- Dedicated to the new version of the GPi6 chainsaw - the use of this particular guide guarantees a perfect interaction with the drive system, brake and lubrication system of the chainsaw. This will translate into less wear and tear on the battery, lower risk of failure and longer trouble-free operation.
Typical applications of the GPi 6 OTH-GSKAKP6R16 guide:
- pruning branches and branches of fruit trees,
- forming hedges and shrubs with thick stems,
- preparation of firewood from thin logs and slabs,
- cutting wooden elements for gazebos, sheds, pergolas,
- cleanup work on the plot, in the garden and around the house after high winds.
OM Line GPi 6 guide - quality, durability and reliability in everyday work
The OM Line brand, manufacturer of the GPi6 saw and original accessories, is committed to solid performance and high reliability. The OTH-GSKAKP6R16 guide is designed as an integral part of the cutting system, therefore:
- Works seamlessly with original OM Line chains - The appropriate groove profile, width and geometry of the bar tip ensure optimum interaction with the chain, which reduces wear and improves cutting efficiency.
- Reduces user fatigue - The light weight of the guide bar, combined with the GPi6 saw's compact design, makes it easier to work overhead (when cutting higher branches) and in hard-to-reach places, such as in dense tree crowns or between bushes.
- Improves work safety - properly profiled bar tip reduces the tendency to kickback, which is of great importance, especially for those less experienced in operating chainsaws.
In daily use, the GPi 6 OTH-GSKAKP6R16 guide allows:
- quickly shorten branches pruned with secateurs or cordless shears,
- conveniently cut parts for small garden structures,
- efficiently clean up the site after cutting down volunteer trees and shrubs.
If you are looking for stable chainsaw operation, shorter cutting time and reduced chain and battery wear, the OM Line original guide bar is the best choice.
GUIDE FOR GPi 6 saw OTH-GSKAKP6R16 - technical specifications and fit
Below is a summary of key technical and performance data:
- Model: OTH-GSKAKP6R16
- Purpose: original guide bar for GPi 6 cordless saw (cutting machine)
- Device version: new version of GPi6
- Guide length: 15 cm (6")
- Material: hardened steel, resistant to abrasion and deformation
- Application: gardening, orchard, housekeeping and small workshop work
- Compatibility: oM Line GPi6 cordless saw (new generation)
With such parameters, the guide is ideally suited to the needs of owners of gardens, recreational plots and single-family houses, who appreciate equipment that is lightweight, handy and at the same time resistant to intensive seasonal use.
How to take care of the OTH-GSKAKP6R16 guide to make it last as long as possible?
Proper guide maintenance is critical to the life of the guide and the safety of the user. To maximize the life of the GPi 6 OTH-GSKAKP6R16 guide, it is worth following a few simple rules:
- Regular chain lubrication - Ensure that the oil tank of the GPi6 saw is always filled with the correct chain oil. Proper lubrication reduces friction, protects the guide groove and prevents the cutting set from overheating.
- Periodic cleaning of the groove - after finishing work, remove sawdust and debris from the guide groove and, if necessary, gently blow it out with compressed air or clean it with a dedicated tool.
- Checking the wear and reversal of the guide - from time to time it is a good idea to turn the guide "upside down" so that the edge wear is even. This reduces the risk of burr formation and extends the life of the component.
- Proper chain tension - A chain that is too loose can fall off, and one that is too tight puts undue stress on the bar and drive. Control the voltage according to the GPi6 chainsaw manual.
By following the above rules, you will keep your chainsaw's full performance and high safety for long gardening seasons.
FAQ - frequently asked questions about the guide bar for the GPi 6 OTH-GSKAKP6R16 chainsaw
Question 1: Does this guide fit any version of the GPi6 saw?
The OTH-GSKAKP6R16 model is dedicated to the new version of the GPi6 cordless saw. Before you buy, it's a good idea to compare the device's markings or consult your dealer to make sure you have the right variant of the saw.
Question 2: What is the working length of this guide?
The guide is 15 cm, or 6 inches long. This size is optimal for gardening work - especially for pruning branches, shrubs and preparing fine firewood.
Question 3: Can I use this guide with any chain 6"?
It is recommended to use the chain provided by the manufacturer of the GPi6 saw (or a fully compatible substitute with the same parameters - pitch, guide link width and number of links). This will ensure safe operation, proper lubrication and even wear on both the chain and bar.
Question 4: How often should I replace the guide bar on the GPi6 chainsaw?
The frequency of replacement depends on the intensity of use, the quality of lubrication and the care of the cleanliness of the cutting set. For typical household work, the guide will last for several seasons. Replacement is worth considering when you notice uneven groove wear, visible burrs, or significant deterioration in the quality of chain tracking.
Question 5: Does replacing the guide bar yourself affect the saw's warranty?
Self-replacement of the guide for the original model provided by the manufacturer (such as OTH-GSKAKP6R16) generally does not adversely affect the warranty, provided that the work is carried out in accordance with the operating instructions. If in doubt, it's a good idea to read the warranty terms and conditions or consult an authorized service center.
Question 6: Is the GPi 6 OTH-GSKAKP6R16 guide suitable for professional use?
Yes, although the GPi6 saw is most often chosen by individual users, the original guide bar will also work very well for gardening companies or cleaning crews that need a lightweight and handy equipment for fast cutting of branches and small woods.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.