GPI 6 SAW CHARGER OTH-GSKAGP15652
- GPI 6 chainsaw charger OTH-GSKAGP15652 - original 18-volt charger for GPi 6 cordless chainsaw. Fast charging up to 3 h, safe operation, ideal for home, garden and professional applications.
GPi 6 chainsaw charger:
Voltage: 18 V rated;
Charging time: up to 3 h
156
GPI 6 saw charger OTH-GSKAGP15652 is a dedicated power device designed to charge the battery of the GPi 6 saw. With a rated voltage of 18 volts and an optimal charging time of up to 3 hours, it provides stable, safe and efficient energy replenishment, resulting in long and trouble-free operation of the tool. It's ideal for users who value reliability, convenience, and having their equipment ready to go at any time of the day.
What is the GPI 6 OTH-GSKAGP15652 chainsaw charger and why is it so important?
GPI 6 chainsaw charger OTH-GSKAGP15652 is a specialized AC adapter designed to work with the GPi 6 chainsaw battery. Its task is to provide properly selected 18-volt voltage and charging current, which guarantee safe filling of cells without the risk of overheating or damaging them. Unlike universal chargers, this model has been optimized precisely for the parameters of the chainsaw battery, which is the key to long battery life and high efficiency of the entire set.
A well-chosen charger has a direct impact on the safety of the chainsaw - it protects the battery pack from overcharging, charging too fast and uncontrolled temperature rise. This allows the user to fully focus on the job at hand - cutting wood, pruning branches or preparing firewood - without worrying about the power status of the device. Charging time of up to 3 hours allows you to conveniently schedule technology breaks and ensure continuous operation even during the busy gardening or construction season.
From the user's point of view, this means not only convenience, but also measurable savings - a properly selected charger extends the life of the battery, reducing the need for frequent battery replacement. It's an investment that pays off in the form of greater reliability of the entire saw power system.
GPI 6 chainsaw charger OTH-GSKAGP15652 - installation location and convenience of use
The OTH-GSKAGP15652 charger is a plug-in design - it mounts directly into a standard 230 V power outlet. In practice, this means that no additional installation or station preparation is required; all that is needed is access to an electrical outlet and a place to put the battery or the entire saw down while it is charging. The compact size and light weight mean that the loader can be permanently kept in the workshop, garage or tool house, and easily taken with you to the lot or construction site when needed.
Long power cord with a plug that matches the socket on the saw/battery provides the freedom to position the device in a comfortable position. The charger can be placed on a shelf, workbench, in a toolbox or hung on a hanger near an outlet. This solution avoids tangled wires and accidental damage to equipment when working in a confined space.
Examples of applications in daily use:
- Charging the battery of the chainsaw in the garage after finishing cutting firewood - in the evening you plug in, in the morning the saw is ready to continue working.
- Replenish energy in the battery during a lunch break at the construction site - after up to 3 hours of operation, the charger allows you to continue cutting wooden parts.
- A fixed charging point in the workshop - a charger mounted near the workbench where you immediately put the saw away after use, so that it is always ready for the next job.
Use of the 18-volt charger for the GPi 6 chainsaw - reliability at home, in the garden and on the construction site
The GPI 6 OTH-GSKAGP15652 chainsaw charger is designed for heavy and regular use of a cordless saw. The 18-volt rated voltage makes it ideal for powering the tool in typical home, garden and semi-professional applications. It will work well for both individual users and small companies engaged in landscaping or small carpentry work.
Key application areas:
- Garden and allotment work - Cutting branches, pruning fruit trees, cleaning up the area after strong winds. With the charger, the battery can be fully charged before the weekend to complete all scheduled work without downtime.
- Preparation of firewood - regular charging of the battery allows you to use the saw to cut firewood for the heating season. Charging time of up to 3 h allows the chainsaw to be used twice or thrice in a day with proper work organization.
- Assembly and construction work - cutting structural elements, formwork, roof battens or beams in places where access to a permanent supply is limited. On the construction site, all you need is one 230-volt outlet so that the power supply can successively charge the battery when the tool is not in use.
This type of charger is also an excellent choice as a spare or additional device - for example, for a second workstation or as a backup charger in a service vehicle. Having two loaders significantly increases flexibility and reduces the risk of downtime if one of them is left in a different location or suffers accidental mechanical damage.
Key advantages of the GPI 6 OTH-GSKAGP15652 chainsaw charger - quality, durability and safety
The OTH-GSKAGP15652 charger is distinguished by its stable performance and solid workmanship, which translates into a long life of the device. The housing is designed to withstand typical conditions in the workshop or garage - dust, minor dirt and accidental impacts. The high quality of the electronic components used ensures the repeatability of the charging process and minimizes the risk of failure.
Key user benefits:
- Optimum voltage of 18 volts - Ideally matched to the GPi 6 chainsaw battery, resulting in high charging efficiency and less energy loss.
- Charging time up to 3 hours - Allows you to quickly prepare the tool for the next work cycle; short enough to recharge the battery several times in one day.
- Battery safety - appropriately selected parameters of charging current protect cells from overheating and overcharging, which extends their life and reduces operating costs.
Examples in practice:
- During the autumn season, you regularly charge the battery to trim branches on a regular basis - the charger takes care of the correct parameters, so you don't worry about premature battery consumption.
- In a gardening company, several people use the same chainsaw - the loader ensures that the equipment is always ready, and with repetitive charging cycles, work scheduling is predictable.
- As a do-it-yourselfer prepares wood for the construction of a terrace - after each intensive cutting you connect the saw to the charger, confident that the next steps will be completed without unplanned interruptions.
Technical specifications for the GPI 6 OTH-GSKAGP15652 chainsaw charger
- Purpose: charging the battery of the GPi 6 chainsaw
- Rated output voltage: 18 V
- Device type: mains charger (power supply) for rechargeable power tool
- Estimated battery charging time: up to 3 hours
- Type of connection: mains plug 230 V AC + cable with plug for battery/power cutter
- Design: compact housing with power cord, suitable for workshop and garden conditions
FAQ - Frequently asked questions about the GPI 6 OTH-GSKAGP15652 chainsaw charger
Question 1: For which chainsaw is this charger intended?
The OTH-GSKAGP15652 charger is designed for use with the GPi 6 chainsaw powered by an 18-volt battery. It has been matched in parameters to this particular model, which ensures safe and efficient charging.
Question 2: How long does it take to fully charge the battery?
Declared charging time is up to 3 hours. The actual time may depend on the battery's discharge rate, condition and environmental conditions, but in typical use it allows the saw to be quickly ready for the next cycle of work.
Question 3: Can I use this charger for other 18 volt batteries?
The charger is designed primarily for the GPi 6 chainsaw battery. Using it with other 18-volt batteries is only possible if the manufacturer explicitly allows such use and the parameters are fully compatible. Failure to do so may damage the battery or void the warranty.
Question 4: Where is the best place to charge a chainsaw battery?
It is best to charge the battery in a dry, ventilated room, away from direct sunlight, sources of heat and moisture - such as in a garage, workshop or tool house. The charger should have a stable base, and the cable should not be subjected to mechanical damage.
Question 5: Can I leave the battery connected to the charger overnight?
It is recommended that you follow the recommendations of the chainsaw and battery manufacturer. It is standard practice to disconnect the battery once the charging process is complete, which has a positive effect on its life span. However, if the manufacturer allows a longer connection, the charger - with the appropriate parameters - provides a safe power supply.
Question 6: Is the charger suitable for heavy daily use?
Yes, the GPI 6 OTH-GSKAGP15652 chainsaw charger is built for regular, even daily use. Its technical parameters and solid workmanship make it perfect for both the discerning home user and the small service company.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.