GUIDE FOR SAW GPI 6 (PREVIOUS VERSION) OTH-GSKAGP15650
- Original OM Line OTH-GSKAGP15650 guide bar for GPi6 cordless saw - previous (old) version. Length 15 cm (6"), ideal for precision wood cutting in the garden and home workshop.
original guide bar for cordless saw (cutter) GPi 6 ; length 15 cm - 6" (NOTE! applies to the previous version of the old GPi6 )
156
What is the guide for the GPI 6 OTH-GSKAGP15650 chainsaw and what version it fits into?
The guide bar for the GPI 6 (previous version) OTH-GSKAGP15650 is an original 15 cm (6") long cutting element specifically designed for the older, first-generation GPi6 cordless saw from OM Line. This is the factory component responsible for guiding the cutting chain - on its quality depends the precision, speed and safety of work when cutting branches, firewood or structural elements.
The OTH-GSKAGP15650 model is designed for users who are still using the the old version of the GPi6 chainsaw and need a fully compatible, robust spare or replacement guide. Thanks to the use of the appropriate profile, mounting hole spacing and tensioner slot, the guide is perfectly compatible with the original chain used in this version of the device.
Where the OTH-GSKAGP15650 guide bar is mounted on the GPi6 cordless saw?
The OTH-GSKAGP15650 guide bar is mounted directly in the cutting head of the GPi6 cordless saw (old version). Its installation consists of placing the end of the guide in the drive socket at the sprocket, and then aligning the mounting holes and tensioner slot in the right places so that the chain can be properly tensioned.
The hole spacing, thickness and shape of the bar foot are exactly matched to the design of the previous version of the GPi6 saw. As a result, the user does not need to make any modifications or adjustments - just remove the used guide bar and in its place put a new one, tightening the cover and adjusting the chain tension according to the instructions of the device.
Such a fit translates into:
- quick and intuitive installation - Even for users who occasionally service tools,
- stable chain guidance without the risk of slipping or wedging,
- maintaining full safety at work provided by the saw manufacturer.
Application of guide bar for cordless saw GPi6 (previous version)
Thanks to its working length of 15 cm (6"), the OTH-GSKAGP15650 guide bar is ideal for typical garden, workshop and household work. When installed in the GPi6 saw, it allows precise cutting of wood with a diameter of approx. 60-80 mm, which is more than enough for most tasks in the garden and on the property.
Example applications:
- Pruning branches of trees and shrubs - Quick shortening of branches, removal of dry and diseased branches, crown shaping of fruit trees.
- Preparation of firewood - Cutting finer logs, trimming wood to the proper length, preparing kindling.
- Cleanup work after windstorms - Removal of broken branches, cutting of small trunks and branches lying on the plot.
- Workshop work and DIY - cutting wooden elements in the construction of pergolas, flowerbeds, fences, small garden structures.
The original guide bar ensures that the chain is properly guided, which is crucial for precision cutting, such as when shaping ornamental trees or when cutting structural components, where an even, clean edge is important.
The main advantages of the OM Line GPi6 15 cm guide (previous version)
- Original product dedicated - the guide was designed by the manufacturer for a specific model of GPi6 saw (old version), which guarantees full compatibility and safety of use.
- Optimum length 15 cm (6") - Great compromise between cutting range and handiness of saw; ideal for one-handed operation and maneuvering in dense tree crowns.
- Solid construction - Rigid, warp-resistant bar foot ensures even load distribution and extends the life of both the bar itself and the cutting chain.
- Precision and clean cut - proper guidance of the chain links reduces vibration, reduces the risk of jamming in the material and leaves a smoother cutting surface.
- Hassle-free installation - identical mounting holes and adjustment slots as the factory-installed part on the GPi6 saw allows for quick replacement without specialized tools.
Technical features of the guide bar for OM Line GPi6 OTH-GSKAGP15650 cordless saw
The guide bar, as a key component of the cutting system, must combine light weight with high strength. The OTH-GSKAGP15650 meets these requirements, offering parameters perfectly matched to the power and nature of the old-generation GPi6 compact cordless saw.
Key utility and functional data:
- Guide length: 15 cm / 6"
- Purpose: gPi6 cordless saw/cutting machine - previous (old) version
- Type of parts: original cutting guide for chain
- Color: bright with black OM Line logo (aesthetically pleasing match to the saw set)
- Mounting holes and slots: optimized for the factory chain mounting and tensioning system on the GPi6 chainsaw
Thanks to the use of suitable materials and surface treatment, the guide is resistant to abrasion, and the smooth edges of the groove facilitate the smooth running of the chain. This, in turn, translates into less heating of the cutting system and an extended life of the entire kit.
Why choose an original guide bar for the old version of the GPi6 chainsaw?
Users of older equipment often face a dilemma: invest in a new chainsaw or look for replacement parts for their existing, proven equipment. By choosing the original OTH-GSKAGP15650 guide bar, you can breathe new life into your GPi6 saw while maintaining its full functionality and safety without having to buy a new machine.
User benefits:
- Save - replacing the bar itself is much cheaper than buying a new chainsaw.
- Safety and compliance - the original part meets the standards and parameters provided by the manufacturer, which is of great importance when working with cutting tools.
- Extend the life of the device - Regular replacement of worn parts, such as the guide bar and chain, allows you to maintain high working culture of the tool for years.
- Comfort of use - a well-chosen guide reduces vibration and noise, improves cutting ergonomics and increases precision, which both professionals and amateurs will appreciate.
Examples of daily use of the GPi6 15 cm guide in the home and garden
Thanks to its compact size, the GPi6 saw with OTH-GSKAGP15650 guide bar is an extremely versatile tool that works in many situations you encounter on a daily basis:
- In the garden: pruning hedges with thick branches, shaping ornamental trees, removing regrowth at the base of trunks, cleaning up shrubs after winter.
- On a recreational plot: preparing wood for a bonfire, cutting stakes and posts, working on small garden architecture (benches, pergolas, fences).
- Around the house: cutting boards and squared timber for minor renovations, quick shortening of slats, softwood structural elements.
- After windstorms and storms: instant removal of broken branches from the roof of sheds, fences or garden paths.
In all these applications, the reliability of the guide bar is crucial, and it must hold the chain exactly in the cutting axis - this is what the original model OTH-GSKAGP15650 provides.
FAQ - Frequently asked questions about the GPI 6 (previous version) saw guide OTH-GSKAGP15650
1. Does this guide fit any GPi6 chainsaw?
The OTH-GSKAGP15650 guide bar was designed exclusively for the previous (old) version of the GPi6 cordless chainsaw. With a newer version of the device, use a guide dedicated to the current model. Before buying, it is a good idea to compare the markings of the device and the appearance of the original guide.
2. What is the working length of the guide?
The length of the guide is 15 cm (6"). This size provides great portability of the saw and allows efficient cutting of wood with a diameter of about 60-80 mm, which is quite sufficient for typical garden work.
3. Can I replace the guide bar on my GPi6 chainsaw myself?
Yes. Replacing the guide bar on the GPi6 saw is easy. Simply remove the chain guard, loosen the tension, remove the old guide bar and replace it with a new one, making sure that the chain is properly aligned in the groove and properly tensioned according to the saw's instruction manual.
4. Do I need to use a specific chain for this guide?
It is recommended to use a chain with the parameters provided by the GPi6 saw manufacturer. As a result, the bar and chain work together optimally to guarantee smooth running, less wear and tear, and the highest level of safety.
5. When to replace the guide with a new one?
The guide is worth replacing when you notice:
- uneven wear of the chain guide groove,
- visible burrs or cracks,
- frequent dropping or blocking of the chain despite proper tension,
- significant deterioration in the quality and straightness of the cut.
In such situations, a new, original OTH-GSKAGP15650 guide bar will restore the GPi6 saw to its former efficiency and safety.
6. Is the guide covered under warranty?
The warranty period and terms depend on the policies of the store and the manufacturer. Under standard conditions, the guide as an operating part is covered for defects in material and workmanship revealed in normal use.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.