TWO-HANDED PRUNER KAMIKAZE KM-750 OTH-GSKA17271
- KAMIKAZE KM-750 TWO-HANDED SEKATOR OTH-GSKA17271 - lightweight semi-professional garden secateurs with rack and pinion mechanism, scissor blade made of SK-5 steel with Teflon coating, length 460 mm, cutting branches up to 28 mm.
What is the KAMIKAZE KM-750 two-handed pruner and who it was made for?
KAMIKAZE KM-750 two-handed pruner OTH-GSKA17271 is a high-end, semi-professional tool for precise cutting of branches in the garden, orchard and green areas. It combines light weight, ergonomics and an innovative rack and pinion mechanism that significantly increases cutting power with minimal user effort. This makes it perfect for both the discerning hobbyist and the gardener who performs frequent maintenance work.
It's a hand tool - no assembly to machines or equipment required. The user holds the secateurs in both hands, and the 460mm length provides the perfect balance between reach and full cutting control. Lightweight, contoured design allows you to work comfortably even during longer pruning sessions on trees, ornamental shrubs, hedges or vines.
The KM-750 secateurs are distinguished by a scissor-type blade made of hardened SK-5 steel with a Teflon coating, which guarantees clean, even cutting and reduces the sticking of plant juices. Handles made of glass fiber reinforced polyamide are durable, resistant to mechanical damage and comfortable to use.
Kamikaze KM-750 two-handed pruner - original manufacturer's description
Kamikaze KM-750 two-handed pruner
KM750 two-handed pruner is designed for semi-professional pruning work in the garden. Its innovative cutting mechanism is equipped with a pin with a rack-and-pinion system that increases cutting power, allowing you to work more efficiently with less effort. The secateurs are made of high-quality materials such as fiberglass-reinforced polyamide on the handle and hardened steel with Teflon coating on the blades. Its ergonomic and light design combined with a length of 460 mm makes it ideal for a variety of gardening and landscaping maintenance tasks.
- Cutting mechanism: pivot with rack and pinion system that multiplies the cutting force.
- Handle material: glass fiber reinforced polyamide.
- Blade material: hardened steel with Teflon coating.
- Blade type: scissors
- Weight: 0.565 kg.
- Secateurs length: 460 mm.
- Maximum cutting diameter in green wood: 28 mm.
- Type of application: garden, semi-professional.
- Blade material: SK-5 hardened steel.
- Spare parts available (blade and counter blade replacement kit):
Where to use the KAMIKAZE KM-750 two-handed pruner and its applications?
KAMIKAZE KM-750 two-handed pruner does not require assembly - it is ready to use right out of the box. The user holds the tool in his hands, pointing the blade directly at the branch to be cut. The 460mm reach allows you to easily reach branches on shrubs and trees of medium height without the need for a ladder.
This model is ideal for:
- Home gardens - shaping of ornamental shrubs, roses, hydrangeas, forsythia, boxwoods, pruning of young shoots of fruit trees.
- Orchards and vineyards - Green pruning, crown clearance, correction of vine shoots to a diameter of approx. 28 mm.
- Professional care of greenery - seasonal work on ROD plots, recreational areas, gardening companies and nursery farms.
Thanks to its lightweight design (only about 0.565 kg), you can easily take the secateurs with you to work in the field, and prolonged pruning does not cause excessive arm and wrist fatigue.
KAMIKAZE KM-750 TWO-HANDED SECATOR - the highest quality materials and comfort of use
This model is designed to combine durability with maximum comfort. Handles made of fiberglass-reinforced polyamide are extremely resistant to damage, yet lightweight and pleasant to the touch. Properly selected length of the secateurs (460 mm) provides natural hand spacing, which translates into less stress on the joints.
Hardened SK-5 steel with Teflon coating guarantees sharpness of the blade for a long time and smooth cutting even of fresh, resinous branches. The coating reduces the adhesion of plant juices, makes the tool easier to clean and protects the metal from corrosion, which significantly extends its life.
Thanks to the scissor type of blade, the secateurs make clean, precise cuts, which is crucial for plant health - a smooth wound surface heals faster and reduces the risk of fungal infections. This is especially important when pruning fruit trees, vines and disease-sensitive ornamental shrubs.
Examples of daily applications:
- regular formation of a hedge of ligustrum, tui or barberry,
- cutting branches of apple, pear, plum and other fruit trees in spring and autumn,
- care of shrubs of roses, lavender, budleia, shrubs or trailing sedges,
- removal of overgrown shoots in ornamental and recreational gardens.
Innovative rack and pinion mechanism - more cutting power with less effort
The heart of the KAMIKAZE KM-750 pruning shear is a pivot with a rack and pinion system that mechanically multiplies the cutting force. This means that with the same amount of hand pressure you get much more power on the blade than with classic pruning shears. This solution will be especially appreciated by people with less strength in their hands, older users and anyone who wants to speed up garden work without getting tired.
The rack-and-pinion mechanism makes the secateurs smoothly pass through branches up to 28 mm in diameter in green wood. Pruning thicker shoots of young trees, umbrella-shaped shrubs or branches that previously required a garden ball becomes much easier and faster.
Examples of practical use of the rack-and-pinion mechanism:
- easy cutting of woody shoots of jasmine, forsythia or lilac without the need for great force,
- shortening the thicker, one-year growth of fruit trees after the fruiting season,
- effortless removal of older, unnecessary shoots in park and climbing rose bushes.
Lightweight design of the KM-750 pruning shear - more productivity, less fatigue
The weight of the secateurs is about 0.565 kg, which is very low for a two-handed tool. This allows the user to work for longer periods of time without feeling excessive strain on the arms, shoulders and wrists. The lightweight combined with the ergonomic shape of the handle significantly improves working comfort and safety - the tool lies securely in the hands and is easy to control.
This is especially important during seasonal, several-hour jobs, such as spring tree clearance or autumn garden cleanup, when dozens or even hundreds of branches need to be pruned. With the KM-750 pruning shear, you reduce fatigue, and thanks to the precise guidance of the blade, work is faster and more efficient.
Practical examples:
- long-term formation of hedges along the fence without feeling "heavy hands" after an hour of work,
- convenient pruning of shrubs in ornamental beds and along garden paths,
- seasonal cleanup of the orchard - removal of excessive regrowth and water shoots.
Use of KAMIKAZE KM-750 pruning shear in daily garden care
KAMIKAZE KM-750 two-handed pruner is a versatile, semi-professional tool that will find use in most garden care tasks. With a maximum cutting diameter of 28 mm, it is ideal for green wood - fresh, actively growing branches. It will work well for both delicate ornamental plants and vigorous pruning of young trees or fruit bushes.
Application in practice:
- crown shaping of young fruit and ornamental trees,
- removal of diseased, damaged or crossing shoots to improve crown airiness,
- forming shrubs for hedges, bouquets, flowerbed compositions,
- rejuvenation pruning of older shrubs - gradual removal of the oldest branches to encourage the plant to grow.
Technical data of KAMIKAZE KM-750 TWO-HANDED SECATOR OTH-GSKA17271
- Model: KAMIKAZE KM-750 OTH-GSKA17271
- Tool type: two-handed secateurs, garden, semi-professional
- Cutting mechanism: pivot with rack and pinion system (multiplied cutting force)
- Blade type: scissors
- Blade material: hardened SK-5 steel with Teflon coating
- Handle material: glass fiber reinforced polyamide
- Overall length of the secateurs: 460 mm
- Maximum cutting diameter in green wood: 28 mm
- Weight: about. 0.565 kg
- Type of application: garden, semi-professional
- Replacement parts available: blade and counter blade replacement kit
- EAN: 8435128265949
- Manufacturer/System Code: OTH-GSKA17271
FAQ - frequently asked questions about the KAMIKAZE KM-750 two-handed pruner
1. For what maximum branch thickness is the KAMIKAZE KM-750 pruner suitable?
The pruner is designed to cut green wood with a maximum diameter of about 28 mm. Thanks to the rack-and-pinion mechanism, it will cope with most branches encountered when caring for trees and shrubs in the garden.
2. Is the KM-750 two-handed pruner suitable for amateur use?
Yes. Although it is a semi-professional tool, it will also work great in the home garden. The mechanism that increases the cutting force makes it easier for people with less strength in their hands and users who value convenience and speed of work.
3. Does the secateurs require assembly?
Not. The KAMIKAZE KM-750 two-handed pruner is a tool that is ready to use immediately after purchase. Just take it out of the package, check the tightening of the moving parts and you can start working in the garden.
4. How to take care of pruning shear blades to make them last as long as possible?
When you're done, it's a good idea to wipe the blades with a damp cloth, removing any residual juices and dirt, and then gently dry them. From time to time, you can apply a preservative or protective oil. Thanks to the Teflon coating, cleaning is easy and the blades are well protected against corrosion.
5. Are spare parts available for the secateurs?
Yes, replacement parts are available for the KM-750 model - primarily a blade and counter blade replacement kit. This allows you to significantly extend the life of the tool and, if necessary, restore it to full capacity without buying a new secateurs.
6. Can the secateurs also be used for dry, hard wood?
You will get the best results when cutting green wood, according to the purpose of the secateurs. Occasional cutting of thinner, dry branches is possible, but with frequent contact with hard, dry wood, it is recommended to use tools specially designed for this purpose (such as garden saws), so as not to shorten the life of the blade.
7. Is the secateurs suitable for the elderly?
Yes, with a low weight of about 0.565 kg and a rack-and-pinion mechanism that assists in cutting, the KAMIKAZE KM-750 pruner is a good choice for the elderly as well. When used properly, it allows you to work efficiently in the garden without putting too much strain on your hands.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.