DRILL RIG SOIL AUGER WRG2 OO-OTHWRG2
- WRG2 SOIL DRILLER OO-OTHWRG2 - powerful Emak 63.3 cm³, 3.9 hp diesel drill rig. Ideal for quickly drilling holes for posts, fences, plants and foundation piles.
WRG2 SOIL DRILLER OO-OTHWRG2 - professional diesel soil drill for demanding users
WRG2 soil auger drill rig OO-OTHWRG2 is a powerful, diesel-powered device for quickly drilling holes in the ground for planting plants, installing posts, structural piles or preparing outdoor lighting installations. Thanks to its powerful 63.3 cm³ Emak engine with 3.9 horsepower, as well as a wide range of drill diameters, the drill is perfect for both intensive professional work and home applications.
The equipment is designed for one-person convenience, high resistance to harsh conditions and operation in any working position. It is a reliable solution for gardening and orchard companies, construction crews and demanding individual users.
What is the WRG2 OO-OTHWRG2 soil auger drill rig and how it works?
WRG2 soil auger drill rig OO-OTHWRG2 is a portable, combustion-powered device for drilling vertical holes in the ground. It is equipped with an Emak two-stroke motor, reduction gearing and interchangeable auger drills with different diameters from 8 to 30 cm. The rotating auger cuts and brings the soil to the surface, creating a clean, level hole of the set diameter and depth.
The device is operated by an operator standing over the drilling site. Comfortable, wide handles and an optimized 37:1 gear ratio allow precise auger guidance and control even in harder soils. As a result, work that would take hours by hand can be done in minutes.
Where the WRG2 OO-OTHWRG2 soil boring rig is installed and used?
The WRG2 drilling rig is a free-standing and mobile - does not require permanent installation on the vehicle or structure. Just install the appropriate auger, prepare the fuel mixture and you can start working anywhere. It works well in many locations and industries:
- In the garden and on the plot - Drilling holes for planting trees, shrubs, vines, hedges, plants in rows;
- On the farm and in the orchard - Quickly prepare thousands of holes for plantings, fence posts or supports for climbing crops;
- In construction - Holes for foundation posts of fences, shelters, terraces, gazebos, pergolas and fencing systems;
- In infrastructure and utilities - Preparation of holes for piles, poles, poles and lighting lanterns in urban spaces and private areas;
- In plant nurseries and vineyards - serial drilling at regular intervals with the same depth and diameter.
Thanks to internal combustion power, the device does not require a source of electricity - it works wherever you need it, including in unimproved areas and extensive crops.
WRG2 OO-OTHWRG2 soil drilling rig - comfortable operation and safe work
When designing the WRG2 drill rig, special emphasis was placed on ergonomics and user safety. This makes the equipment comfortable even for prolonged daily use.
- All motor control buttons in one handle - gas, switch and other controls have been integrated into a single, easily accessible location. This allows you to conveniently control the rotation of the auger, react quickly when needed and reduce the risk of confusion during operation.
- Folding handles - when finished working, the arms can be folded, making it easy to transport the drill rig in a car, bus or on the back of a delivery vehicle, as well as to store it in a small workshop or garage.
- Gas lever protection against accidental activation - special lock prevents uncontrolled activation of the drive. This is especially important when the rig is carried, put away or serviced.
- Stable frame and spring cushioning element - Robust design minimizes the transmission of vibrations to the operator's hands, which increases comfort and accuracy of the auger, and reduces fatigue during prolonged operation.
Examples of daily use:
- installation of dozens of fence posts around the property in one day, without having to hire an excavator or an outside team,
- planting a new line of vines or hedges - one operator, one drill rig and hundreds of even holes made in a short time,
- preparation of holes for piles for greenhouses, foil tunnels or pergolas - quickly and precisely, even on harder soils.
Emak 63.3 cm³ engine and 37:1 transmission - the heart of the WRG2 OO-OTHWRG2 drill rig
Responsible for the performance and reliability of the drill rig is a high-end two-stroke engine Emak and a durable gearbox suitable for heavy-duty work in various types of ground.
- Emak two-stroke engine, 63.3 cm³ - large capacity guarantees high torque necessary for drilling in demanding soils. At the same time, the motor is relatively lightweight, making it easy to maneuver the device.
- Power 3.9 hp (2.9 kW) - allows efficient drilling with augers of larger diameters, without engine throttling or speed drops, even when working in clay or compacted soil.
- Chrome-plated cylinder, forged steel crankshaft and connecting rod - the use of resistant materials extends the life of the drive unit, ensures stable operation at high speeds and increases resistance to overloading.
- 37:1 ratio - appropriately selected gearbox increases the torque on the auger, so that the drill more easily breaks through harder layers of soil, and drilling is smooth and stable.
This configuration makes WRG2 OO-OTHWRG2 equipment ready for intensive use - from single backyard jobs to multi-hour series of wells in service companies and farms.
Use of WRG2 OO-OTHWRG2 soil auger rig in practice
Thanks to the wide range of auger diameters available (8-10-15-20-25-30 cm) the device can be fine-tuned to the type of work being performed:
- Augers 8-10 cm - Ideal for holes for small posts, piles for light fences, supports for climbing plants (e.g. tomatoes, currants) or mounting anchors.
- Augers 15-20 cm - will work well for planting trees, shrubs, vines, and installing standard fence posts and terrace structures.
- Augers 25-30 cm - designed for larger plantings, deeper post foundations for sheds, gazebos, pergolas or more massive panel fences.
The drill rig is supplied from the factory with a 200 mm auger bit, making it a versatile solution for most gardening and construction applications. It can be retrofitted with other drill bit diameters as needed.
Example usage scenarios:
- establishment of the vineyard - quick and even placement of holes for vine cuttings and support posts,
- modernization of the fence - replacing the old posts without having to dig holes by hand, significantly reducing the time of work,
- installation of garden and street lighting - drilling holes for lantern poles in new housing estates, parking lots, park avenues,
- construction of light structures of small architecture - gazebos, pergolas, carports, garbage sheds, etc.
Technical specifications of WRG2 OO-OTHWRG2 soil drilling rig
| Engine capacity | 63.3 cm³ |
| Engine power | 3.9 hp (2.9 kW) |
| Engine type | emak two-stroke, chrome cylinder, forged steel shaft and connecting rod |
| Translation | 37 : 1 |
| Weight without drill bit | 10.4 kg |
| Drill bit diameter range | 8, 10, 15, 20, 25, 30 cm |
| Auger included | 200 mm (20 cm) |
| Handles | folding, integrated motor control |
| Gas protection | yes, against accidental activation |
Benefits of purchasing WRG2 OO-OTHWRG2 soil auger drill rig
By opting for the WRG2 OO-OTHWRG2 model, you get:
- Saving time and work - Drilling a hole takes several dozen seconds instead of several minutes of manual digging;
- Precise and repeatable holes - important when establishing vineyards, plantations or installing panel fences, where even spacing and depth are important;
- Versatility of applications - A wide selection of auger diameters allows one machine to be used for multiple tasks;
- Mobility - No need for mains power, low weight (10.4 kg without drill) and folding handles make it easy to transport in the field;
- High durability - chrome-plated cylinder and forged-steel components increase the engine's resistance to heavy use.
Original product description - WRG 2 soil auger drill rig
WRG 2 soil auger drill rig
Ideal for work involving making holes in the soil for planting vines or other plants, for brackets or piles in greenhouses and greenhouses, and for work in preparing street lighting. These devices are characterized by high resistance to stress in extreme conditions and in any working position.
- Developed for small soil borings for a variety of applications (vineyards and plants, street lights, fence supports), the model is equipped with an Emak two-stroke engine, chrome-plated cylinder, and forged steel engine shaft and connecting rod.
- The motor control buttons are located on a single handle, making it ideal for individual work.
- The device is equipped with folding handles for easy transportation.
- Gas lever is protected against accidental activation.
SUPPLIED WITH A 200 MM AUGER
Technical specifications:
| Engine capacity | 63.3 cm³ |
| Engine power | 3.9 hp - 2.9 kW |
| Translation | 37 :1 |
| Weight without drill bit | 10.4 kg |
| drill bit diameter | 8-10-15-20-25-30 cm |
FAQ - Frequently asked questions about the WRG2 OO-OTHWRG2 soil auger drill rig
1. Is the WRG2 drilling rig suitable for operation by one person?
Yes. The machine's design, weight distribution, wide handles, and placement of controls are designed for convenient operation by a single operator. However, in more difficult soil conditions for increased comfort and safety, you can work in two people.
2. What auger is included and can I buy other diameters?
As standard, the drill rig is supplied with an auger with a diameter of 200 mm (20 cm). The unit is designed to work with drill bits with diameters of 8, 10, 15, 20, 25 and 30 cm - additional augers can be purchased separately to suit specific tasks.
3. What type of soils the WRG2 drill rig is suitable for?
The WRG2 drill will work well in most types of soil found in gardens, orchards and construction sites - from light, sandy soils to more compact, clayey soils. In the case of very rocky ground, care should be taken and the depth and diameter of the hole should be selected according to field conditions.
4. Does the device require electrical power?
Not. The drilling rig is powered by a two-stroke internal combustion engine, fueled by a fuel-oil mixture. Thus, it can be used anywhere without access to electricity.
5. How to take care of a drilling rig so that it will serve for many years?
The basis is the use of the right fuel-oil mixture, regular inspection and cleaning of the air filter, spark plug and lubrication of moving parts. After each work, it is a good idea to clean the auger from the ground and store the device in a dry place, folded handles facilitate safe storage.
6. Is the WRG2 drill rig suitable for drilling for building foundations?
The WRG2 model is designed primarily for lighter and medium-duty work - holes for posts, piles, light structures and plantings. For deep foundation holes for large structures, it is better to use heavier specialized equipment.
7. Can the drilling rig be used in winter?
Yes, but in cold weather, use high-quality fuel, make sure the oil is the right viscosity in the mix, and remember that frozen, very hard soil can make drilling difficult. In such conditions, it is advisable to disturb the topsoil beforehand or wait for a thaw.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.