SOIL AUGER 15 CM OM LINE OO-OTHOM15
- OM LINE OO-OTHOM15 15 cm soil auger - professional, manual gardening auger made of hardened Finnish boron steel. Ideal for drilling holes for posts, plants and anchors in most types of soil.
OM LINE OO-OTHOM15 soil auger 15 cm - what it is and what it is used for?
OM LINE 15 cm soil auger OO-OTHOM15 is a sturdy, hand-held gardening and construction tool designed to quickly drill holes in the ground with a diameter of about 15 cm. Thanks to its well-thought-out design and high-quality materials, it allows you to easily, conveniently and economically drill holes for posts, foundations of small structures, planting of plants or installation work, without the need to use heavy combustion equipment.
The auger will work well both in the home garden, on the ROD plot and on the construction site. Enables precise drilling in most types of soil - from light, sandy soils to harder, clay soils. Thanks to its manual operation, it is safe, cheap to operate and requires no fuel or power supply.
Where and how to mount the OM LINE OO-OTHOM15 15 cm soil auger?
OM LINE OO-OTHOM15 auger is a a completely manual tool, therefore does not require any additional mounting to the engine or machine. The user grasps the T-shaped transverse handle and makes a clockwise rotary motion, plunging the auger into the ground. When the required depth of the hole is reached, the tool is removed and the removed soil remains on the spiral drill bit, making it easy to discard it to the side.
The auger is applied directly to the site of the planned hole. There is no need for additional assembly steps - just put the working tip on the ground, set the tool vertically and then start drilling. With an overall length of 106 cm, the user can work in an upright position, which significantly relieves pressure on the spine and reduces fatigue.
In practice, you will use the OM LINE auger m.in. to:
- making holes for fence posts or posts for sheds and pergolas,
- preparing holes for planting trees, shrubs or ornamental plants,
- embedding foundation anchors and terrace supports,
- installation work - such as putting up posts for garden lighting or irrigation system components.
Original description - soil auger 15 cm OM LINE OO-OTHOM15
Soil auger 15 cm om line
Working part made of hardened Finnish boron steel
Handle covered with rubber
Length 106 cm
Handle 50 cm
OM LINE OO-OTHOM15 soil auger - superior durability with hardened Finnish boron steel
The most important part of any auger is the working part. In the model OM LINE OO-OTHOM15 it is made of hardened Finnish boron steel, known for its exceptional resistance to abrasion, bending and cracking. As a result, the tool retains the sharpness of its cutting edges much longer than standard augers, resulting in faster and lighter work.
The boron steel with increased hardness makes the auger easily handle:
- harder clay soils,
- soil with small stones and grass roots,
- soils that were previously compacted or used.
For example, when installing a fence over a length of several tens of meters, you don't have to worry that the working part will deform or dull after just a few holes. The auger maintains stability and drilling precision, which is crucial for aligning posts evenly and maintaining uniform point foundation dimensions.
An additional benefit of using hardened steel is the following lower susceptibility to corrosion and mechanical damage. As a result, the tool can serve for many seasons, even with intensive use in wet conditions, such as on garden plots or near irrigation systems.
Comfort of work - ergonomic handle covered with rubber and 50 cm handle
OM LINE model OO-OTHOM15 is designed for users who appreciate the convenience of work. Handle covered with rubber provides a secure and stable grip, even when hands are wet or soiled with soil. Rubber reduces slippage, reduces the risk of abrasion and provides better tool control during intensive drilling.
50 cm long handle t-shaped design allows you to comfortably embrace the auger with both hands, which significantly increases torque and makes it easier to screw the tool into the ground. With this:
- people with less physical strength can effectively drill holes,
- forearm and wrist fatigue is reduced,
- rotary movements are smooth and stable, resulting in even, cylindrical openings.
In practice, this means that you can drill a dozen or more holes for posts or plantings in one day without feeling excessive strain on your hands. It's ideal for gardeners, fence installers and do-it-yourselfers who value ergonomics and thoughtful tool design.
Length 106 cm - working in an upright position and greater drilling range
Total length of the auger 106 cm is crucial for comfort and efficiency. This length allows most users to work in an almost upright position, which significantly relieves pressure on the spine and minimizes the risk of back pain after prolonged drilling.
For typical applications, such as:
- drilling holes for fence posts,
- preparation of holes for planting trees and shrubs,
- installation of anchors and supports,
106 cm length allows you to make a hole of the right depth without having to bend down every time you want to make the auger deeper. You work faster while maintaining more precise vertical tool alignment.
An additional advantage is easier pulling the auger out of the hole - longer body tube gives better leverage, which is especially important in heavier, wet soils where the tool can be "sucked" more through the soil.
Use of OM LINE OO-OTHOM15 soil auger 15 cm in the garden and on site
The 15 cm diameter auger is one of the most versatile sizes, making it ideal for a wide range of applications. Here are examples of situations in which the OM LINE OO-OTHOM15 model will prove indispensable:
- Installation of fences - making even holes for steel, wooden or concrete posts, both for panel and mesh fences.
- Construction of small architecture - preparation of point foundations for pergolas, sheds, light wooden structures or gazebos.
- Planting plants - quick preparation of holes for fruit trees, ornamental shrubs, conifers or hedges.
- Garden installations - erecting posts for outdoor lighting, cameras, irrigation system components or information boards.
- Cleaning and maintenance work - deepening of existing holes, replacement of posts or correction of their positioning.
The hand auger is also an excellent choice in places where heavy diesel or electric equipment cannot be driven in - such as on densely planted ROD plots, near underground utilities or in hard-to-reach parts of the garden.
The most important advantages of the OM LINE OO-OTHOM15 soil auger from a user's perspective
When creating a range of earthmoving tools, it is worth highlighting the benefits that the user will receive by choosing this particular model:
- Saving time and strength - spiral design and sharp, hardened tip dig quickly into the ground, minimizing physical effort.
- Precise holes - The auger drills even, cylindrical holes with a repeatable diameter, which facilitates stable embedding of posts and plants.
- No operating costs - the tool does not require fuel, oil or engine servicing as with combustion augers.
- Quiet operation - ideal for allotments and estates where noise could be a nuisance to neighbors.
- Easy to transport and store - The auger has a slim design, it will fit in the trunk of the car or in the garage without taking up much space.
As a result, the user gets a tool that perfectly combines professional quality workmanship z simplicity of operation and very high profitability of purchase.
Technical data - OM LINE Soil Auger 15 CM OO-OTHOM15
- Model: OO-OTHOM15
- Type: manual soil auger
- Working diameter: about. 15 cm
- Overall length: 106 cm
- Handle length: 50 cm
- Material of the working part: hardened Finnish boron steel
- Handle: covered with rubber, "T" shaped cross handle
- Application: drilling holes in the ground for posts, plants, anchors, landscaping elements and garden installations
- EAN: 5903383017755
FAQ - Frequently asked questions about OM LINE OO-OTHOM15 15 cm soil auger
1. What type of soil is the OM LINE OO-OTHOM15 auger suitable for??
The auger will work well in most types of soils - from light, sandy soils to medium hard and clay soils. Thanks to hardened Finnish boron steel, it can also handle partially compacted soil and small stones. For very hard, dry soils, it is recommended to moisten the substrate in advance.
2. What depth of holes can I get?
The working length of the auger (106 cm) allows for drilling holes of the depth typically required for installing fence posts, foundation anchors or planting trees. The exact depth depends on the ground conditions and the way the user works, but is usually in the range of 40-80 cm.
3. Does the auger require any special maintenance?
After finishing work, it is recommended to clean the working part from the soil, and if necessary wipe it with a dry cloth. Occasional protection of metal parts with a thin layer of technical oil will further prolong corrosion resistance. The tool is best stored in a dry place.
4. Can this auger be used by people with no experience?
Yes. The hand auger is easy to use and does not require specialized skills. Just set it upright, press lightly and make rotating movements with the handle. This tool is recommended for both professionals and amateurs of garden and construction work.
5. Is the diameter of 15 cm suitable for the installation of fence posts?
Working diameter of about 15 cm is universal for many types of steel and wooden posts. Provides a hole wide enough to conveniently position the post and pour concrete mix or fill it with compacted soil, ensuring that the element is firmly embedded in the ground.
6. Can auger be used in winter in frozen ground?
In very hard frozen ground, working with any hand auger is difficult. If the permafrost layer is thin, you can first disturb it with another tool (such as a spade) and then drill with an auger. If the ground is deeply frozen, it is recommended to carry out the work in warmer periods.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.