ASC 55 CAS CHARGER (FOR DURO18V) OO-OTHH448848
- ASC 55 CAS Charger (FOR DURO18V) OO-OTHH448848 - professional, fast Li-Ion 56 V / 4.0 Ah charger for the Starmix DuroSweep 77 Pro 18V sweeper. Charging time approx. 45 min, 8 A current, lightweight (551 g), ideal for cleaning companies and industrial appl
CAS ASC 55 Charger (FOR DURO18V) OO-OTHH448848 is a professional high-speed Li-Ion battery charger designed to power the Starmix DuroSweep 77 Pro 18V sweeper (Haaga) and other compatible CAS system equipment. Thanks to its high-voltage charging technology and intelligent power management, it ensures short charging times, longer battery life and full equipment readiness in all conditions.
What is the ASC 55 CAS charger (FOR DURO18V) OO-OTHH448848?
The ASC 55 CAS charger is an advanced electronic charging station for the lithium-ion batteries used in the Starmix DuroSweep 77 Pro 18V cordless sweeper (Haaga). The device is designed for heavy-duty cleaning equipment used in cleaning companies, industrial plants, warehouses, production halls and for maintaining order around office and public buildings.
The charger works with Li-Ion batteries, offering fast charging times and optimal control of cell parameters. This means your DURO 18V sweeper is always ready to go, and charging interruptions are kept to a minimum.
Where the ASC 55 CAS charger (FOR DURO18V) is mounted and how to use it?
ASC 55 CAS charger (FOR DURO18V) OO-OTHH448848 is a desktop charger. It is most often set up in the service room, utility room, technical storage or in the company garage, that is, wherever the Starmix DuroSweep 77 Pro 18V sweeper and batteries are stored on a daily basis. Stable design and compact size allow you to place it on a shelf, workbench or special battery charging station.
Using the charger is extremely easy - just plug it into a standard 230-volt power outlet, and then slide the battery into the charging slot until it snaps into place sensibly. The electronics automatically recognizes the type of cells, controls the temperature and charging current, and when the process is complete, goes into a holding mode, so the battery is always fully charged but not overcharged.
In practice, this means that a worker can simply place the battery in the charger at the end of a shift and be sure that the next day the equipment will be ready for intensive work from the first minute.
Application of the ASC 55 CAS charger for the Starmix DuroSweep 77 Pro 18V sweeper
The main use of the ASC 55 CAS charger is to quickly and safely charge the lithium-ion batteries that power the Starmix DuroSweep 77 Pro 18V sweeper (Haaga). Thanks to a high charging current of 8 A and optimized Li-Ion charging characteristics, the batteries reach full capacity in a short period of time, which is crucial in professional applications where cleaning equipment operates in multi-shift mode.
The charger will work well:
- in cleaning companies serving shopping malls, underground parking lots and large-scale facilities,
- in warehouse and logistics halls, where the DURO 18V sweeper keeps traffic routes clean,
- in industrial and manufacturing plants where it is necessary to regularly remove dust, sawdust, pellets or other contaminants,
- in public facilities - schools, hospitals, sports facilities,
- in construction companies taking care of cleanliness on the project site and around buildings.
Thanks to the stable and reliable operation of the ASC 55 CAS charger, the entire cleaning system based on the DuroSweep 77 Pro 18V sweeper gains greater efficiency, less downtime and lower operating costs - the batteries are properly treated, which extends their service life.
ASC 55 CAS charger for DURO18V - fast charging and optimal operation with Li-Ion battery pack
The heart of the power system of the rechargeable sweeper is a Li-Ion battery and a properly matched charger. In this case, the ASC 55 CAS charger is designed to work with a Li-Ion battery with a capacity of 4.0 Ah and an operating voltage of 56 V. Such a set provides an ideal compromise between the power of the device, working time and the weight of the whole set.
It takes about 45 minutes to fully charge the battery from zero to 100%. This means that during a short break, lunch break, or operator change, the equipment can be prepared for the next full cleaning cycle. The charging current of 8 A has been selected to maximize charging while not shortening the life of the cells.
In practice:
- with two batteries, you can organize non-stop sweeper operation by charging one battery while the other is running,
- in facilities with variable cleaning intensity (e.g., shopping malls during peak hours), the charger allows you to flexibly adjust the charging time to your work schedule,
- in service companies, reduced downtime means the ability to complete more orders at the same time.
The comfort and mobility of the Starmix DuroSweep 77 Pro 18V charging system (Haaga)
The ASC 55 CAS loader weighs just 551 g, making it lightweight and easy to move between service bays or facilities. It can easily be taken to the service vehicle and charge the batteries both at the company's base and directly at the customer's site, where the DURO 18V sweeper works. Small size makes it easy to organize the charging area even in small utility rooms.
Practice shows that operators very quickly appreciate the simplicity and ergonomics of the ASC 55 CAS charger - intuitive battery insertion, clear indication of the charging status, and the absence of complicated service steps. It's a plug-and-charge device that is supposed to work reliably every day.
Professional power system - the battery, power and performance of the DuroSweep 77 Pro 18V sweeper
The ASC 55 CAS charger is part of a complete professional power system that includes a 4.0 Ah/56 V Li-Ion battery, a powerful sweeper induction motor and optimized power control electronics. The parameters of the entire system translate directly into the efficiency of the device's operation, so a properly selected charger is crucial for daily operation.
The use of a 4.0 Ah battery allows an operating time of 17 to 30 minutes on a single charge - depending on the mode and load. The maximum speed of the airstream is 48 m/s, and in BOOST mode it is as high as 55 m/s. The user has three levels of speed control and an additional BOOST function, which allows to match the power of the device to the type of dirt.
Operating capacity reaches up to 750 m³/h, and up to 850 m³/h in BOOST mode. This means that large areas can be effectively cleaned in a short period of time: maneuvering areas, parking lots, hall passageways or courtyards around buildings. The ASC 55 CAS charger ensures that the battery that powers such a powerful device is always in optimal condition.
Technical specifications of ASC 55 CAS (DO DURO18V) charger OO-OTHH448848 and related system
The following is a set of the most important technical data related to the operation of the charger and the cooperating battery system and device:
- Battery data: Li-Ion (4.0 Ah / 56 V)
- Charging time: about. 45 min (from zero to 100%)
- Charging current: 8 A
- Charger weight: 551 g
- Motor type of the device: inductive
- Weight of the device with 4.0 Ah battery: 3.8 kg
- Power / blowing force: 12 N (in BOOST function 16 N)
- Operating time on a single charge: 17-30 min (with 4.0 Ah battery)
- Maximum airflow speed: 48 m/s (in BOOST function 55 m/s)
- RPM control: 3 levels + BOOST function
- Performance: up to 750 m³/h (850 m³/h in BOOST function)
Such a selection of parameters makes the whole system - the DuroSweep 77 Pro 18V sweeper, the Li-Ion battery and the ASC 55 CAS charger - a modern and very effective tool for professional cleaning. The charger is the key element here, guaranteeing the repeatability of performance and safety of the batteries.
FAQ - Frequently asked questions about the ASC 55 CAS charger (FOR DURO18V)
Question 1: For which device is the ASC 55 CAS charger (FOR DURO18V) intended?
The ASC 55 CAS (FOR DURO18V) OO-OTHH448848 charger is primarily designed to charge the batteries that power the Starmix DuroSweep 77 Pro 18V cordless sweeper (Haaga). It can also work with other compatible system batteries if the manufacturer allows such use.
Question 2: How long does it take to charge the battery?
The standard charging time for a Li-Ion battery with a capacity of 4.0 Ah and a voltage of 56 V is about 45 minutes - from full discharge to 100% capacity. This allows the equipment to be quickly prepared for the next work cycle.
Question 3: Is the ASC 55 CAS loader heavy and is it suitable for mobile applications?
The charger weighs about 551 g, making it lightweight and convenient to carry. It can easily be transported between facilities or mounted in a company service vehicle to charge batteries directly at the equipment site.
Question 4: Does the charger extend the life of the batteries?
Yes, the ASC 55 CAS charger uses an optimized 8 A charging current and customized charging characteristics for Li-Ion batteries. This charging strategy minimizes the risk of cell overheating, prevents overcharging, and helps maintain the high usable capacity of the battery for a long time.
Question 5: How long can the sweeper run on a single battery charge??
Using a 4.0 Ah Li-Ion battery, the sweeper has an operating time of 17 to 30 minutes, depending on the mode selected and the intensity of the load. The BOOST function, which provides maximum power, can shorten work time, but allows you to quickly tackle tougher contaminants.
Question 6: Can I leave the battery in the charger after charging is complete?
Yes, under typical operating conditions the battery can be left in the charger after the charging process is complete. The control electronics ensure that the cells are not overcharged. However, to maximize the life of the battery, it is recommended to follow the manufacturer's general recommendations for long-term storage.
Question 7: What are the main benefits of using the ASC 55 CAS loader in my company?
The main benefits are: reduced charging time (approx. 45 min), high reliability, Li-Ion battery protection, lightweight and compact design, simple operation, and full compatibility with the Starmix DuroSweep 77 Pro 18V professional sweeper. This gives your company a flexible, efficient and cost-effective system for cleaning large areas.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.