BAR AND CHAIN KIT 158SLGK095+21BP64 OO-ACCVC158SLGK095
- BAR AND CHAIN SET 158SLGK095+21BP64 (.325", 1.3 mm, 64 links, 15") is a professional set for chainsaws. Provides fast, clean cutting, high durability, low vibration, and greater safety at work.
GUIDE AND CHAIN SET 158SLGK095+21BP64 OO-ACCVC158SLGK095 - professional 15" guide bar with chain .325" for chainsaws
CHAIR AND CHAIN KIT 158SLGK095+21BP64 OO-ACCVC158SLGK095 is a complete professional chainsaw work kit, ideal for both demanding individual users and semi-professional applications in forestry, horticulture or gardening services. The set includes a heavy-duty 15" long guide bar and a precision-matched 21BP cutting chain with 64 links of semi-diagonal teeth. Such a set ensures fast, clean cutting, high working culture and operator safety.
What is 158SLGK095+21BP64 OO-ACCVC158SLGK095 bar and chain set?
The product presented here is a factory-tuned duo: chainsaw bar and cutting chain with appropriately matched parameters. The guide is 15" long (approx. 38 cm) is made of sturdy steel and has a precisely shaped groove with a width of 1.3 mm, which provides excellent chain guidance. The end of the guide is equipped with a sprocket (12 teeth) mounted with four rivets, which increases its strength, rigidity and durability during intensive use.
The second element of the set is a 21BP cutting chain with 64 links, equipped with cutting teeth of the half chisel type. This tooth geometry combines high cutting performance with blunt resistance and ease of sharpening. The guide links have been designed with an anti-kickback protrusion, which significantly reduces kickback - one of the most dangerous effects for the operator when operating a chainsaw.
Where the 158SLGK095+21BP64 OO-ACCVC158SLGK095 bar and chain set is mounted?
The kit is designed for installation in chainsaws (petrol and selected electric) whose design is compatible with the parameters of the bar and chain, i.e. pitch .325" and a groove width of 1.3 mm. Installation takes place in place of the standard guide bar and chain - on the side of the saw body, on the guide pivots and chain sprocket. Thanks to its compatible dimensions, it is an ideal replacement for worn out cutting parts on many popular models of garden and forestry saws.
In practice, the kit is assembled:
- under the side cover of the saw - the guide is mounted on the guide pins,
- the chain is put on the drive sprocket and around the end of the guide bar with the sprocket,
- the whole thing is then tensioned with a tension screw and secured with a cover with nuts.
Once the chain is correctly installed and tensioned, the saw gains a new, efficient "cutting heart" capable of intensive work in cutting firewood, tree care or construction work with wood.
Use of the bar + chain set in everyday work
The 158SLGK095+21BP64 OO-ACCVC158SLGK095 bar and chain set is designed for a wide range of woodworking jobs. The 15" length provides a very good compromise between maneuverability and cutting reach, making the product suitable for both small maintenance jobs and when cutting thicker logs.
- In the household - Preparing firewood, cutting branches after logging, shortening beams and boards for construction and repair needs.
- In horticulture and fruit farming - Tree crown clearance, removal of dry branches, cleaning up the area after windstorms and storms.
- In forestry and services - limbing trees, cutting medium-sized timber, preparing timber for skidding and transportation.
- In construction work with wood - Making preliminary cuts of structural elements, cutting piles and poles, fitting elements of small garden architecture.
The 21BP chain with half chisel teeth maintains good sharpness even when cutting more contaminated wood (e.g., with bark residue, sand or fine dirt), and sharpening it is easy and fast, which reduces operating costs in the long term.
PROVIDER AND CHAIN SET 158SLGK095+21BP64 - quality, safety and comfort at work
The kit is designed to combine high cutting performance with maximum operator safety. With an optimal length of 15", the guide bar is long enough to efficiently cut thicker logs, yet handy enough to allow precise maneuvering of the saw in tight spaces - such as between tree branches or in arbors and outbuildings.
Guide links with anti-kickback projection are an important element to improve safety. They reduce the sudden upward "jerk" of the saw when encountering a harder piece of wood or when the bar tip does not properly contact the material. The result is smoother chain operation, less operator fatigue and reduced risk of accidents.
Semi-chisel teeth provide a smoother start to the cut, reduce vibration and maintain a high quality surface after cutting. The user experiences this as a "smooth" entry of the chain into the wood and less need to press the saw against the material.
Convenience of use and durability - why choose this set?
When you buy a complete set of bar and chain, you are assured of a perfect match of working components. You don't have to worry about the compatibility of pitch, groove width or number of links - all these parameters have been factory selected to work together optimally. It saves time and guarantees trouble-free installation.
In addition, the use of a tip with a 12-tooth pinion, mounted on four rivets, significantly extends the life of the bar. This type of termination reduces chain friction, reduces tip heating and reduces wear on both the bar and the chain itself. This is especially important when intensively cutting hardwoods, such as oak, ash or acacia.
In daily use, the set will appreciate:
- Single-family homeowners - For a fast and clean cutting effect that makes firewood preparation and cleanup work on the plot easier.
- Gardeners and fruit growers - For reliability in frequent pruning of branches and care of fruit trees.
- Service companies - for the durability of the working parts, so that the saw can work many hours a day without having to change the bar or chain frequently.
Technical specifications of the 158SLGK095+21BP64 bar + chain set OO-ACCVC158SLGK095
The key technical parameters of the product, which are important when selecting a kit for a specific saw, are collected below:
- Guide length: 15" (about 38 cm)
- Chain pitch: .325"
- Chain groove width: 1.3 mm
- Guide tip: 12-tooth sprocket, mounted with 4 rivets
- Chain type: 21BP
- Number of chain links: 64
- Type of cutting teeth: half-chisel (semi-chisel)
- Guiding cells: with anti-kickback (anti-kickback) performance
- Application: chainsaws in accordance with the parameters .325" / 1.3 mm / 64 cells
Such selected parameters make the 158SLGK095+21BP64 OO-ACCVC158SLGK095 set a versatile solution, suitable for both amateur work around the house and more demanding tasks performed by professional and semi-professional users.
Why this kit is a good choice for your chainsaw?
When you decide to purchase the 158SLGK095+21BP64 GUIDE AND BRANCH KIT OO-ACCVC158SLGK095, you get a product that will increase the performance and comfort of your chainsaw. The set provides:
- Optimum working length - The 15" is an ideal compromise between cutting reach and handiness of the tool, especially important for longer work.
- High cutting culture - semi-chisel teeth and properly shaped guide links guarantee stable, even cutting, with less vibration and oscillation.
- Enhanced security - Anti-kickback elements reduce the risk of sudden jerks of the saw, increasing control of the tool.
- Durability and reliability - robust design of the bar tip and properly selected chain make the set withstand intensive use.
- Convenience of operation - Easier chain sharpening and stable guidance means less downtime and lower service costs.
This solution is especially recommended for users who value trouble-free saw operation, predictable tool behavior and long life of cutting elements without the need for frequent replacements.
Full manufacturer's technical description
Chainsaw bar and chain set:
- Length 15"
- Pitch .325"
- Chain groove width 1.3 mm
- Tip with 12 teeth fixed with 4 rivets
- Chain 21BP 64 links, half-hollow type teeth
- Guide links with anti-reflection projection
FAQ - frequently asked questions
1. Will the 158SLGK095+21BP64 OO-ACCVC158SLGK095 kit fit my chainsaw?
The kit is designed for saws that work with 15" long, pitch guides .325" and 1.3 mm groove width and with 64-link chains. Before you buy, check your chainsaw's rating plate or instruction manual, where you'll usually find the recommended bar and chain specifications.
2. How often should the 21BP chain be sharpened?
The frequency of sharpening depends on the intensity of work and the type of wood being cut. For standard home use, it's a good idea to check the sharpness after each long day's work. The half chisel type teeth are relatively resistant to dulling and easy to sharpen, making ongoing maintenance easier.
3. Does the guide require special maintenance?
The guide does not require complex maintenance, but to preserve its service life it is recommended to regularly clean the groove from sawdust, check the lubrication holes and periodically turn the guide (up/down) so that wear is evenly distributed. It is also important to use the right oil to lubricate the chain.
4. Is the set suitable for cutting very hard woods?
Yes, the kit can handle cutting harder woods such as oak and beech well, provided the chain is kept sharp and properly lubricated. The 12-tooth sprocket tip and robust bar design are conducive to working in tougher conditions.
5. Can I buy the bar or chain from this set separately?
The presented product is offered as a complete set of bar + chain, which guarantees their full compatibility. If you need to buy only one of the components, select it based on the same technical parameters: length 15", pitch .325", groove width 1.3 mm and number of links 64 for 21BP type chain.
6. Does the assembly of the kit require specialized tools?
Standard tools used when operating a chainsaw are sufficient for installation: a bar nut wrench and a screwdriver or wrench to adjust the chain tensioner. The whole installation process is simple and can be done by yourself according to the saw's manual.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.