BAR AND CHAIN SET 140SPEA074+91NP50 OO-ACCVC140SPEA074
- Bar and chain set 140SPEA074+91NP50 OO-ACCVC140SPEA074 - set of 14" 3/8" hobby 1,3 mm, chain 91NP 50 links semi-shear, with anti-kickback links for garden and home saws.
PRAISE AND CHAIN SET 140SPEA074+91NP50 OO-ACCVC140SPEA074 - Professional 14" bar with 3/8" chain for chainsaws
BAR AND CHAIN SET 140SPEA074+91NP50 OO-ACCVC140SPEA074 is a complete, ready-to-install chainsaw service kit for both home users and professionals in the gardening and forestry industries. The package includes a high-quality guide with a length of 14" and the matching 91NP cutting chain with 50 links, so you can be sure of the perfect compatibility of the working parts of the chainsaw.
The kit is designed for maximum safety, comfort and precision cutting. Guide links with an anti-kickback protrusion reduce the risk of dangerous kickback, and the half-chisel teeth ensure fast and clean cutting while reducing the load on the saw's engine. It is the ideal choice for those who want to quickly restore their chainsaw to full performance or improve the quality and efficiency of cutting in their daily work.
Chainsaw bar and chain set:
- Length 14"
- 3/8" hobby pitch
- Chain groove width 1.3 mm
- Tip with 9 teeth fixed with 4 rivets
- Chain 91NP 50 links, semi-cut teeth
- Guide links with anti-reflection projection
What is the bar and chain set 140SPEA074+91NP50 OO-ACCVC140SPEA074?
The 140SPEA074+91NP50 OO-ACCVC140SPEA074 set is a working set for a chainsaw, consisting of two key components: a durable bar and a perfectly matched cutting chain. Guide length 14 inches (approx. 35 cm) and groove 1.3 mm was designed for chains with pitch 3/8" hobby, making it a universal solution for many popular commercial and amateur chainsaws.
Chain 91NP is built from 50 cells and has cutting teeth of the type half chisel. This link shape provides very good cutting properties, while forgiving minor sharpening and maintenance errors, which is especially important for users who do not have much service experience. Guide links with anti-kickback protrusion help reduce the risk of sudden jerking of the saw during contact with wood.
By using a set instead of individual parts, you can be sure that the chain and bar are perfectly matched in terms of length, pitch, groove width and operating angle, which directly translates into the durability, safety and culture of the chainsaw.
Where the guide bar and chain are mounted 140SPEA074+91NP50?
The bar and chain from the 140SPEA074+91NP50 set installs in place of the standard cutting unit on chainsaws. The guide bar is bolted to the body of the saw with factory mounting screws and works with the chain tensioner. Thanks to tip with 9 teeth fixed with 4 rivets ensures smooth chain guidance around the perimeter and efficient power transfer from the engine to the cutting action.
The chain is put on the drive sprocket of the saw and on the groove of the guide bar, and then tensioned according to the instructions of the manufacturer of the device. The parameters of the guide bar - length 14", 3/8" hobby pitch and groove width of 1.3 mm - correspond to the standard used in many popular petrol and electric saws used in gardens, households and allotments.
Examples of installation locations and applications:
- garden chainsaws for pruning trees and shrubs,
- saws used on farms to cut beams, pallets, boards and edges,
- chainsaws in service companies engaged in the care of urban greenery and private areas.
Use of bar and chain set 140SPEA074+91NP50 in daily work
The set 140SPEA074+91NP50 OO-ACCVC140SPEA074 will prove useful wherever precise, comfortable and safe wood cutting is important. With a bar length of 14", this set is ideal for home, gardening and light professional applications.
Typical applications of the kit:
- Garden work - pruning branches of fruit trees, care of hedges (after initial shortening of thick branches), removal of broken branches after windstorms.
- Preparation of firewood - sawing logs into smaller sections, cutting fireplace wood and wood for domestic central heating stoves.
- Construction and housekeeping work - cutting boards, scantlings and beams in the construction of shelters, gazebos, fences, as well as the demolition of old wooden building elements.
The semi-shear type teeth provide a balance between cutting aggressiveness and ease of sharpening, allowing the user to achieve high performance without the need for frequent and complicated servicing. Anti-kickback protrusions on the guide links significantly improve safety at work, especially when cutting branches at different angles and in dense forest cover.
Key technical features and user benefits
The bar and chain set 140SPEA074+91NP50 is distinguished by parameters that translate directly into convenience and safety of use:
- Guide length: 14" (approx. 35 cm) - Optimized for most home and garden tasks; provides good balance of saw and comfortable maneuverability even in tight spaces.
- Chain pitch: 3/8" hobby - A popular standard in the home saw segment; guarantees wide compatibility and smoother, less aggressive operation compared to professional chains with a larger pitch.
- Groove width: 1.3 mm - less resistance in the wood, so higher cutting efficiency and less load on the engine, which extends its life and reduces fuel or electricity consumption.
- Tip with 9 teeth fixed with 4 rivets - Increased bar tip durability and smooth perimeter chain routing; four rivets provide stability and resistance to dynamic loads.
- Chain 91NP, 50 links - High-quality chain with half-hollow teeth, providing very good cutting performance in soft and medium-hard woods.
- Guide links with anti-reflection projection - Effectively reduce the risk of chainsaw kickback, increase the safety of beginners and advanced users.
For the user, this means longer operating time without having to replace components, less operator fatigue, and better tool control. The kit is perfect for both simple jobs and more demanding tasks, such as cutting thick branches or preparing construction timber.
Why choose bar and chain set 140SPEA074+91NP50 OO-ACCVC140SPEA074?
Choosing a ready-made set instead of individual elements means, first of all certainty of fit and time saving. When you buy a set of 140SPEA074+91NP50 OO-ACCVC140SPEA074, you get a guide bar and chain that are perfectly matched to each other in terms of dimensions and operating characteristics. You don't have to choose the length, number of links or width of the groove yourself - everything is designed for hassle-free installation.
Additionally:
- High durability and wear resistance - robust design of the bar, reinforced tip and high quality chain steel ensure long life of the set even with intensive use.
- Occupational safety - Guide links with an anti-kickback protrusion and half-chisel teeth reduce the risk of dangerous situations, giving the user more control over the saw.
- Universal application - the set is suitable for both firewood cutting and maintenance work in the garden, on an allotment or on a small farm.
- Comfort of use - The hobby type chain is easy to sharpen, and the 14" bar length makes it easy to maneuver the saw and work in confined spaces.
It's a recommended solution for anyone who values trouble-free, simple operation and safety, while wanting to keep their chainsaw in full working order without costly servicing.
Technical specifications of bar and chain set 140SPEA074+91NP50
- Guide length: 14" (approx. 35 cm)
- Chain pitch: 3/8" hobby
- Guide groove width: 1.3 mm
- Guide tip: 9 teeth, fastening with 4 rivets
- Chain model: 91NP
- Number of chain links: 50
- Type of cutting teeth: half chisel
- Guiding cells: with anti-reflection projection
- Product code: OO-ACCVC140SPEA074
- EAN code: 5903383018264
Thanks to these parameters, the set will be perfect for replacing worn-out accessories on many popular chainsaws, giving them a second life and increasing the comfort and safety of use.
FAQ - Frequently asked questions about bar and chain set 140SPEA074+91NP50 OO-ACCVC140SPEA074
Question 1: Will the 140SPEA074+91NP50 kit fit my chainsaw?
The kit is designed for saws that work with 14" bars, chains with 3/8" hobby pitch and a groove width of 1.3 mm. To be sure of compatibility, compare these parameters with the specifications of your chainsaw or the cutting kit you have used so far.
Question 2: What kind of work is this chain guide best suited for??
The set will be ideal for pruning branches, tree and shrub care, firewood preparation and light construction work in wood. The 14" length and 3/8" hobby pitch provide good control and safety, so it's an excellent choice for home and gardening applications.
Question 3: How often should you sharpen the 91NP chain from the kit?
Sharpening frequency depends on the intensity of use and the type of material being cut. With regular work in clean wood, a slight sharpening after a few cutting cycles is usually sufficient. When you notice the need to increase the pressure on the saw, fine chips or smoke - this is a sign that the chain needs sharpening.
Question 4: Is the kit suitable for beginner chainsaw users?
Yes. The half chisel type teeth and the guide links with anti-kickback protrusion make the set friendly even for less experienced users. Offers good performance while increasing safety and ease of control of the saw.
Question 5: How to take care of the bar and chain to make them last as long as possible?
Regularly check chain tension, ensure proper lubrication (efficient chainsaw oil system and proper chain oil), avoid contact with soil, sand or rocks while cutting, and store your chainsaw in a dry place. Occasionally rotate the guide "up and down" to evenly distribute the wear of its groove.
Question 6: Does the kit include chain lubrication oil?
No, the kit includes the guide bar and cutting chain. Chain lubrication oil should be purchased separately, matching it to the type of chainsaw and operating conditions.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.