BAR AND CHAIN SET 140SPEA041 +91NP52 OO-ACCVC140SPEA041
- The 140SPEA041 + 91NP52 bar and chain set (14", 3/8" hobby, 1.3mm, 52 links) is a complete, durable cutting system for garden and semi-professional chainsaws for precise, safe wood cutting.
PRAISE AND CHAIN SET 140SPEA041 + 91NP52 OO-ACCVC140SPEA041 - professional 14" guide bar with chain for chainsaws
Bar and chain set 140SPEA041 + 91NP52 OO-ACCVC140SPEA041 is a complete, high-quality chainsaw cutting set for demanding home and semi-professional users. In one package you get a perfectly matched 14" guide bar and a 3/8" pitch hobby chain, which guarantees precise and safe wood cutting in all conditions. Robust construction, long service life and optimized technical performance make it an excellent choice for both daily gardening and more intensive backyard tasks.
Chainsaw bar and chain set:
- Length 14"
- 3/8" hobby pitch
- Chain groove width 1.3 mm
- Tip with 9 teeth fixed with 4 rivets
- Chain 91NP 52 links, half-snout type teeth
- Guide links with anti-reflection projection
What is the bar and chain set 140SPEA041 + 91NP52 OO-ACCVC140SPEA041?
Bar and chain set 140SPEA041 + 91NP52 OO-ACCVC140SPEA041 is a complete cutting system designed for chainsaws (petrol and electric), equipped with 14" bars and working on chains with 3/8" hobby pitch and 1.3 mm groove width. This means that when you buy one product, you get a ready-to-install package that allows you to quickly refurbish or upgrade your saw without having to select individual components.
The set consists of:
- 14" guide bar with a 9-tooth tip, fixed with 4 rivets - which ensures stable chain guidance and long tip life,
- 91NP cutting chain with 52 links, equipped with semi-chisel teeth - guaranteeing efficient cutting while resisting dulling,
- guide links with anti-kickback projection - significantly increasing operator safety.
Such a kit is ideal for users who want to restore the full performance of their chainsaw after the original bar and chain have worn out, or are looking for a complete, quality solution to spare.
Where the bar and chain kit 140SPEA041 + 91NP52 is installed?
The kit installs directly into the chainsaw, replacing the existing bar and chain. It is compatible with chainsaw models that support:
- guide length 14" (about 35 cm),
- 3/8" hobby chain pitch,
- chain groove width of 1.3 mm,
- chain with 52 guide links type 91NP.
Assembly consists of:
- Disconnect the chainsaw from the power supply (or turn off the internal combustion engine and remove the spark plug pipe).
- Unscrewing the side cover and removing the old guide bar with chain.
- Installing the new guide on the mounting studs and chain drive guide.
- Apply the chain to the drive sprocket and guide bar, observing the correct direction of the cutting teeth.
- Pre-tensioning the chain and tightening the side cover, then fine-tuning the tension.
Thanks to its standard dimensions and the 3/8" hobby pitch used, the kit fits into the group of the most popular solutions used in garden and household saws - both well-known brands and many market devices.
The use of bar and chain set 140SPEA041 + 91NP52 OO-ACCVC140SPEA041 in daily operation
The kit is designed for a wide range of household, garden and light workshop applications. It will prove m.in. to:
- preparation of firewood from branches and logs of medium diameter,
- cleanup work after windstorms - removal of broken branches and windbreaks,
- tree care - shortening and cutting branches at height (using appropriate tools and protection),
- construction of wooden structures in the garden, such as pergolas, gazebos, fences or firewood sheds,
- cutting beams, scantlings and boards in the home workshop.
The 14" length is an optimal compromise between maneuverability and cutting performance - the saw remains lightweight, handy and easy to control, while comfortably handling most tasks typical of household and small farm operations.
Victus 140SPEA041 + 91NP52 bar and chain set - quality, durability and cutting safety
The 140SPEA041 + 91NP52 set is made for long-term use and user safety. Key technical features translate directly into comfort and quality of work:
- Tip with 9 teeth fixed with 4 rivets - The multi-toothed tip provides a smooth curve for the chain, which makes it easy to cut both along wood fibers and when felling branches. Mounting with 4 rivets increases rigidity and resistance to mechanical damage, which is especially important when working in harder woods.
- Chain 91NP - semi-snout type teeth - semi-chisel (semi-chisel) profile combines good cutting aggressiveness with increased resistance to dulling compared to solid chisel type blades. In practice, this means that the chain stays sharp longer, even when contact with dirty wood, bark or fine sand happens.
- Guide links with anti-reflection projection - special shape of links reduces kickback force (kickback) in case of chain jamming. This is an important feature that increases the level of safety, especially for less experienced users who use the chainsaw mainly in the garden.
In everyday use, these solutions mean:
- fewer chain sharpenings,
- stable, smooth cutting,
- higher safety even under less favorable conditions (branches under tension, cutting overhead - always respecting health and safety rules).
Technical highlights of the bar + chain set 140SPEA041 + 91NP52
- Guide length: 14" (approx. 35 cm)
- Chain pitch: 3/8" hobby
- Chain groove width: 1.3 mm
- Chain type: 91NP
- Number of chain links: 52
- Type of cutting teeth: semi-chisel (semi-chisel)
- Guide tip: 9 teeth, fastened with 4 rivets
- Guide cells: with anti-reflection projection
- Application: garden, home and semi-professional chainsaws
- Product/System Code: OO-ACCVC140SPEA041
- EAN code: 5903383018271
Such a selection of technical parameters means that the kit is compatible with many popular chainsaw models on the market and is a sensible choice for users looking for a proven, durable and safe cutting solution.
User benefits - why choose this bar and chain set?
When you choose bar and chain set 140SPEA041 + 91NP52 OO-ACCVC140SPEA041, you get:
- Saving time - you don't have to select the bar and chain separately or worry about parameter compatibility. You assemble the complete, matched kit right out of the box.
- Higher cutting precision - Matching guide bar and chain provide a stable cutting line, which translates into more accurate preparation of firewood, even cutting of beams or aesthetic formation of tree crowns.
- Safety of use - Anti-kickback guide links and well-thought-out tooth geometry significantly reduce the risk of the saw rebounding violently towards the operator.
- Longer life - Robust bar tip with 9 teeth, mounted on 4 rivets, minimizes wear at a key stress point, and the half-choke type chain stays sharp longer.
- Universal application - The 14" length and 3/8" hobby pitch is the standard used on many garden saws, making the set great for use as a main or spare set.
In practice, this means you can complete all the usual jobs faster and safer: from cutting wood for the fireplace, to tidying up the orchard, to preparing structural components for small carpentry projects.
How to take care of the bar + chain set to serve as long as possible?
To maximize the life of your guide bar and chain, it's a good idea to follow a few simple operating rules:
- Regular lubrication - always make sure the chain oil level in the chain saw tank is correct. Insufficient lubrication accelerates the wear of both the chain links and the bar groove.
- Proper chain tension - too loose chain can slip off the bar, too tight - will accelerate wear and increase the risk of overheating. The chain should adhere to the guide bar, but be able to be lifted slightly by hand (with the saw off, of course).
- Teeth sharpening - Regular sharpening (e.g., after every refueling or after a noticeable drop in cutting performance) maintains high operating efficiency and reduces engine load.
- Cleaning the guide groove - removal of sawdust and dirt from the groove and lubrication holes allows for proper oil circulation and even wear of components.
- Avoiding contact with the ground and foreign bodies - Sand, pebbles and nails dull the chain's teeth very quickly; so try to work in a clean, possibly litter-free environment.
Applying these basic principles, the set of 140SPEA041 + 91NP52 will serve long and reliably, maintaining high operating culture and safety.
FAQ - Frequently asked questions about bar and chain set 140SPEA041 + 91NP52
1. For which saws this kit fits?
The kit is designed for chain saws that support 14" bars, 3/8" hobby pitch chain, 1.3mm groove width, and 52 guide link type 91NP chain. Before you buy, it's a good idea to check these parameters in your saw's manual or on the markings of your old guide bar.
2. Is the chain in the kit safe for less experienced users?
Yes. The 91NP chain features guide links with an anti-kickback protrusion, which reduces the risk of violent kickback from the chainsaw. Nonetheless, always wear personal protective equipment (gloves, goggles, anti-tear pants, helmet with face shield) and work in accordance with the instructions of the equipment.
3. How often should the 91NP chain be sharpened?
The frequency of sharpening depends on the intensity of work and the type of wood being cut. For typical backyard work, it's a good idea to check the sharpness after each extended use of the saw. When you notice a decrease in the rate of cutting, the appearance of fine dust instead of chips, or greater stress on the engine - this is a sign that the chain needs sharpening.
4. Can I use another chain on this bar?
Yes, as long as it conforms to the parameters of the guide bar and the saw, i.e.: 3/8" hobby pitch, 1.3 mm guide link width and the same number of guide links (52). Use of other parameters may lead to malfunction or damage to the device.
5. Is the kit suitable for intensive, professional forestry work?
The 140SPEA041 + 91NP52 set is designed mainly for home users, gardeners and for lighter semi-professional work. For intensive, all-day work in the woods, dedicated professional systems with longer bar lengths and properly matched chains will work better. However, for most tasks around the house and farm this set is fully sufficient and very convenient.
6. How to store the kit if I only use it seasonally?
After the season is over, it's a good idea to clean the bar and chain of resin and sawdust, lubricate lightly with protective oil, and store in a dry place, preferably in the original packaging or on a sheltered bar mounted on the saw. This will prevent corrosion and ensure readiness for the next season.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.