CHAINSAW CUTTING CHAIN 1,3 MM 3/8" HOBBY 57 GUIDE LINKS OO-ACCV91NP57
- Victus 91NP OO-ACCV91NP57 saw chain (3/8" hobby, 1.3 mm, 57 links) for petrol and electric saws. Low vibration, half chisel teeth, anti-kickback links - fast, safe and precise wood cutting.
CHAINSAW CUTTING CHAIN 1,3 MM 3/8" HOBBY 57 GUIDE LINKS OO-ACCV91NP57 VICTUS - PROFESSIONAL CUTTING QUALITY FOR ANY CHAINSAW
Victus 1.3 mm 3/8" hobby chainsaw cutting chain 57 guide links OO-ACCV91NP57 is a precision-made, high-quality chain designed for 3/8" hobby petrol and electric chainsaws. Provides very good cutting performance, increased working comfort and enhanced operator safety due to the special design of the cutting links with anti-kickback protrusion. It will work perfectly in the hands of both the discerning hobbyist and the semi-professional user looking for a reliable accessory for everyday work in the garden, on the allotment or on the farm.
What is the cutting chain OO-ACCV91NP57?
This is the working element of the saw responsible for the actual cutting of the wood. Model OO-ACCV91NP57 is a cutting chain of the type Victus 91NP, with 3/8" hobby pitch, 1.3 mm groove width and length 57 guide links. It was equipped with semi-chisel type cutting teeth, which combine very good cutting aggressiveness with high resistance to dulling, and in cutting links with an anti-kickback protrusion, improving work safety.
Where the 1.3 mm 3/8" hobby 57 link cutting chain is mounted?
The chain is mounted on the guide bar of the saw - between the drive wheel (sprocket) and the end of the guide bar. It requires:
- guide with a groove width of 1.3 mm,
- saws with a drive wheel adapted to the 3/8" pitch of the hobby,
- bar length corresponding to 57 guide links (mostly amateur and light garden saws).
Application of chain OO-ACCV91NP57
The chain is designed to:
- preparing firewood at a home farm,
- garden work - pruning and felling trees, cutting branches and boughs,
- cleanup work after windstorms and storms,
- simple carpentry and joinery work in soft and medium-hard wood,
- daily operation of chainsaws in hobby and semi-professional applications.
Cutting chain for Victus 91NP chainsaw
- Length 57 guide links
- 3/8" hobby pitch
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
- Cutter links with anti-reflection projection
Victus 91NP OO-ACCV91NP57 cutting chain - precision cutting, high performance, greater safety
The Victus 91NP OO-ACCV91NP57 cutting chain is designed for users who want a clean, fast and controlled cutting with maximum security. The design of the links with an anti-kickback protrusion reduces the risk of the chainsaw jerking towards the operator (known as kickback), which is one of the most important parameters for safe work in the forest and garden. This makes the chain also well suited for less experienced users who are just starting out with a petrol or electric chainsaw.
Semi-chisel type teeth guarantee high cutting comfort - they bite into the wood firmly but not aggressively, making it easier to guide the saw in a straight line and along a set track. This is especially important when cutting wood into even pieces of firewood, when making carpentry joints, cutting joists with precision or when building gazebos, sheds and fences. At the same time, the chain maintains good performance in long-term operation, which translates into fewer sharpening breaks.
In daily use, the OO-ACCV91NP57 chain allows you to quickly prepare firewood for winter, regularly trim fruit trees and cut branches after maintenance work. It will also prove useful during the construction of garden landscaping elements, where repetitive and accurate cutting of beams and squared timbers is required. With this, the user gains a working tool that realistically speeds up work and makes it easier to maintain order in the garden and on the property.
3/8" hobby pitch and 1.3 mm width - a perfect fit for lightweight garden saws
The OO-ACCV91NP57 cutting chain has a 3/8" hobby pitch, which is standard on most lightweight domestic petrol and electric chainsaws. This means that the chain works without any problem with a wide range of popular models of chainsaws on the market - both brand-name and cheaper market equipment, as long as they have a bar and sprocket of the same standard. This way, the user does not have to look for dedicated, hard-to-find chains - just match the number of links (57) and the groove width (1.3 mm).
Guide link width 1.3 mm has been optimized for low friction and lower engine load. A thinner chain requires less power to cut, so the saw runs lighter, uses less fuel (or electricity), and the drive components wear out more slowly. This is especially important for lighter, lower-powered saws, which are often in the hands of hobby users - a properly selected chain makes cutting easier and less tiring.
In practice, this translates into a convenient application in:
- lightweight chainsaws used by allotment holders for seasonal cutting of branches and boughs,
- electric saws used in covered areas or in a carpentry workshop,
- low- and medium-powered petrol saws, where mobility, light weight and low vibration are important.
By properly matching parameters, the chain not only optimizes the performance of the saw, but also extends its life by minimizing overloading and unnecessary vibration. This is a real saving on service and spare parts, while also providing greater convenience for the user.
Semi-chisel type cutting teeth - durability, easy sharpening and high working culture
One of the key features of the Victus 91NP OO-ACCV91NP57 cutting chain is the use of semi-hollow cutting teeth. Compared to full chisel teeth, they are:
- more resistant to dulling upon accidental contact with dirty wood,
- easier to sharpen properly with a round file,
- less sensitive to minor sawing errors.
This makes the OO-ACCV91NP57 chain ideal for people who sharpen chains themselves in the workshop or even in the field, using simple guides and files. A properly sharpened half-chisel tooth generates evenly shaped chips, indicating optimum chain operation and minimal stress on the engine. The stable tooth geometry also contributes to lower vibration levels, which is especially important for longer work cycles - hands get less tired and the operator maintains greater precision.
In daily use, the user will appreciate this design during:
- cutting damp firewood after the rainy season,
- working in backyard conditions, where wood is sometimes contaminated with sand or soil,
- preparation of construction material for sheds, fences, platforms and garden structures.
The combination of resistance to dulling and ease of sharpening keeps the chain in very good shape for a long time, reducing operating costs and reducing the need for frequent replacement with a new one.
Cells with anti-knockback protrusion - greater safety and comfort with any chainsaw
The OO-ACCV91NP57 chain is equipped with cutting links with anti-knockout protrusion, which significantly reduce the tendency of the saw to bounce upward and toward the operator uncontrollably. This is especially important in situations where the tip of the guide bar accidentally touches wood or another hard component - one of the most common reasons for dangerous accidents when working with a chainsaw.
This solution makes the chain:
- is safer for less experienced users,
- facilitates precise guidance of the saw during cutting,
- reduces perceived jerkiness when entering the fabric.
In practice, this means calmer, more controlled work when pruning branches on a ladder, felling smaller trees or cutting structural components at height. The operator can concentrate on precise guidance of the saw instead of fighting uncontrolled movements of the tool. An additional benefit is less fatigue in the muscles of the hands, arms and back, allowing you to work longer without losing concentration.
Technical parameters of the cutting chain 1,3 mm 3/8" hobby 57 links OO-ACCV91NP57
- Model/type: victus 91NP cutting chain
- Product code: OO-ACCV91NP57
- Chain length: 57 guide links
- Pitch: 3/8" hobby
- Guide link width: 1.3 mm
- Type of cutting tooth: half chisel
- Cell construction: cutting links with anti-kickback protrusion
- Application: petrol and electric saws suitable for 3/8" hobby pitch and 1.3 mm groove
- EAN: 5903383018387
The right chain length (57 guide links) and standard 3/8" hobby pitch make this product compatible with many popular chainsaw models on the market. If in doubt, it's a good idea to compare the number of links with the chain you've been using so far, or check the markings on the bar of your chainsaw.
Practical applications - from the home garden to farm work
Victus 91NP OO-ACCV91NP57 cutting chain is a versatile solution for a wide range of users. Thanks to its refined design, it works well in many everyday situations:
- In the garden and on the plot - ideal for pruning ornamental trees and shrubs, shaping fruit tree crowns, removing dry or diseased branches, and preparing fireplace firewood.
- In the household - makes it easy to quickly cut logs and logs into smaller pieces, prepare wood for a campfire, build wooden structures such as pergolas, tool sheds or sheds.
- In the workshop and small carpentry shop - Allows pre-formatting of beams, boards and scantlings before further processing, as well as quick cutting of elements to size.
With a combination of safety, good performance and wide compatibility, the OO-ACCV91NP57 chain is a versatile choice as a primary work chain or as a spare set to take to the field.
FAQ - Frequently asked questions about OO-ACCV91NP57 cutting chain
1. Will the OO-ACCV91NP57 chain fit my chainsaw?
To check this, compare three parameters: chain pitch (3/8" hobby), bar groove width (1.3 mm) and number of guide links (57). You will usually find this information stamped on the bar or in the saw's manual. If all three values match, the string will match.
2. What type of wood is this chain suitable for?
The chain works well with soft and medium-hard wood - pine, spruce, birch, alder, as well as many hardwoods used in the household. It will work well for both cutting fresh and seasoned firewood.
3. How often should you sharpen your chain?
Sharpening frequency depends on the intensity of work and the cleanliness of the material being cut. If the chips become very fine, the saw starts to "dust", and the cut requires more pressure - this is a sign that the chain needs sharpening. For typical backyard work, it's a good idea to check the sharpness after each day of use.
4. What file to sharpen this chain with?
Semi-chisel type cutting teeth in 3/8" pitch hobby chain are sharpened with a round file matched to this pitch (usually 4.0 mm or 4.5 mm - depending on file and chain manufacturer's recommendations). A sharpening guide or gauge is recommended to maintain correct tooth geometry.
5. Is the chain suitable for beginner chainsaw users?
Yes. Thanks to the links with anti-kickback protrusion and half-hole teeth, the OO-ACCV91NP57 chain is relatively "gentle" in handling and less prone to violent kickbacks than aggressive full-hole chains. It is a good choice for those starting out with a chainsaw, of course, while following all safety rules.
6. Can the chain be used in electric saws?
Yes, provided the electric saw has a 1.3mm groove width guide bar, 3/8" hobby pitch and requires a 57 guide link chain. Many modern electric saws use just such parameters, so the chain will work perfectly in them.
7. How to take care of a chain to make it last as long as possible?
Regularly check and maintain proper chain tension, ensure proper lubrication (efficient chainsaw oil system, use of chain oil), avoid cutting in dirt and sand, and sharpen the chain at the first signs of decreased cutting performance. Storing the chainsaw with a lubricated chain in a dry place will prevent corrosion.
Cutting chain for 1.3 mm 3/8" hobby chainsaw 57 guide links OO-ACCV91NP57 is a solid investment in safety, comfort and quality of work with a chainsaw - whether in the garden, on the farm or in the workshop.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.