CHAINSAW CUTTING CHAIN 1,3 MM 3/8" HOBBY 52 GUIDE LINKS OO-ACCV91NP52
- Victus 91NP OO-ACCV91NP52 saw chain (3/8" hobby, 1.3 mm, 52 links) - a durable, safe semi-shear chain with anti-kickback links, ideal for home and garden saws.
SAW CHAIN 1,3 MM 3/8" HOBBY 52 GUIDE LINKS OO-ACCV91NP52 - PRECISION CUTTING AND SAFE OPERATION IN ALL CONDITIONS
Victus 91NP chainsaw cutting chain is a high-quality chainsaw accessory for both home users and discerning do-it-yourselfers. Thanks to its precision-designed semi-shear cutting links and anti-kickback protrusions, it guarantees a clean, even cut while reducing vibration and the risk of kickback. It is the ideal choice for gardening, firewood preparation and light household work.
Cutting chain for Victus 91NP chainsaw
- Length 52 guide links
- 3/8" hobby pitch
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
- Cutter links with anti-reflection projection
What is 1.3 mm 3/8" Hobby saw cutting chain 52 guide links OO-ACCV91NP52?
Cutting chain OO-ACCV91NP52 is the working element of a chainsaw responsible for the proper cutting of wood. It consists of 52 guide links that work together with a 1.3mm wide guide groove and a 3/8" pitch hobby drive sprocket. Semi-chisel type cutting teeth provide fast yet smooth cutting of soft and medium-hard wood, minimizing operator effort.
Thanks to its compact design and optimized technical parameters, the chain is ideal for amateur and semi-professional electric and petrol chainsaws for home use. Properly hardened cells guarantee high wear resistance and long life even under heavy use.
Installation of Victus 91NP OO-ACCV91NP52 cutting chain - where and how to install it?
Cutting chain OO-ACCV91NP52 mounts directly on the chain saw bar, embracing the drive sprocket located on the saw shaft. Due to its technical parameters - 3/8" hobby pitch and 1.3 mm groove width - it must work with a properly selected guide and drive pinion of the same dimensions. Before buying, it's a good idea to check the device's manual or the markings on the old bar to make sure the chain will be compatible.
Installation of the chain is simple and can be done independently:
- Turn off the saw and unplug it (for electric saws) or remove the ignition cable (for petrol saws).
- Unscrew the saw's side cover, releasing the bar tensioner.
- Put the chain on the drive sprocket and bar, making sure that the cutting teeth point in the correct direction (forward on the top of the bar).
- Tension the chain with the tensioner so that it adheres to the bar, but can still be pulled slightly away from the groove by hand.
- Thoroughly tighten the guard and recheck the chain tension after the first few cuts.
The chain is designed for installation in hobby and semi-professional saws of various brands, as long as their manufacturer provides for the use of accessories with a 3/8" hobby pitch and a groove width of 1.3 mm. It can be used m.in. in popular garden saws used in the household, workshop or allotment.
Application of cutting chain 1,3 mm 3/8" Hobby 52 links - ideal for garden and household work
Victus 91NP cutting chain with 3/8" hobby pitch and 1.3 mm width is designed for extensive use in everyday work around the house and garden. It is perfect for:
- cutting firewood into blocks and slabs,
- preparing construction and structural timber for simple structures (sheds, gazebos, fences),
- pruning and felling of smaller trees on the property,
- care of orchards, removal of dry and damaged branches,
- cleaning up the area after windstorms and strong winds,
- pruning thick branches and boughs on a recreational plot.
Thanks to its half chisel type teeth, the chain also copes well with slightly dirty wood, such as a stump lying on the ground or branches with bark remnants. Doesn't dull as quickly as chains with a less favorable tooth profile, allowing you to work longer between sharpenings.
Victus 91NP OO-ACCV91NP52 cutting chain - work safety thanks to anti-reflection links
One of the key distinguishing features of the OO-ACCV91NP52 chain are the cutting links with an anti-knockback protrusion. They reduce the tendency of the saw to so-called kickback (kickback), i.e. the rapid upward jump of the guide bar when its tip encounters an obstacle or is blocked in the material. Reducing the risk of kickbacks translates into a higher level of safety, which is of great importance, especially for hobby users.
Thanks to the anti-kickback protrusions and the appropriate geometry of the half-chisel tooth, working with the saw is more stable and the user has better control over the tool. This is important when making longer cuts, such as when limbing logs or cutting long wooden beams, when fatigue can affect precision of movement.
User safety is also supported by lower vibration levels and smoother chain running on the bar. Less vibration reduces rapid hand and wrist fatigue, which is especially important when working for hours in the woods, garden or preparing more firewood for the winter.
Performance and durability of 3/8" Hobby 1.3 mm chain - why you should choose the OO-ACCV91NP52 model?
Victus 91NP cutting chain is made of high-grade steel, which is subjected to hardening processes that increase abrasion resistance. This means longer life for the cutting teeth and guide links, as well as better maintenance of sharpness compared to cheaper, low-quality chains. For the user, this means less frequent sharpening, greater comfort and time savings.
The half-chisel tooth profile provides very good cutting speed in soft and medium-hard wood, and is less sensitive to small dirt, such as sand or mud on the bark. In practice, the chain maintains optimal performance longer, which is especially important in off-road conditions, when contact with dirt cannot always be avoided.
The chain works well with popular guides with lengths matched to 52 guide links, ensuring even load distribution and stable groove running. In everyday use, this translates into precise cutting without "pulling" the saw sideways, which is important when precisely cutting structural components or preparing material for garden furniture.
Comfort and easy chain maintenance for Victus 91NP chainsaws
OO-ACCV91NP52 chain is designed for maximum user comfort. Thanks to optimized tooth geometry and a narrow groove width of 1.3 mm, there is less cutting resistance, allowing even lower-powered saws to work efficiently. In practice, the user feels less fatigue and the saw is not overstressed.
Maintenance of the chain is simple and requires no specialized tools other than a suitable sharpener or file of the correct size. By sharpening the teeth regularly, lubricating the chain with bar oil and maintaining proper tension, you can significantly extend the life of the chain. The chain works perfectly with standard lubrication systems used in most chainsaws on the market.
Thanks to its easy operation and simple maintenance, the product will work well in the hands of both experienced users and those who are just starting out with a chainsaw, such as when building a gazebo, tidying up the allotment or preparing fuel for the heating season.
The most important technical data of the cutting chain OO-ACCV91NP52
- Model: Victus 91NP OO-ACCV91NP52
- Product type: chainsaw cutting chain
- Chain length: 52 guide links
- Chain pitch: 3/8" hobby
- Guide groove width: 1.3 mm
- Type of tooth: half chisel
- Cutting links with anti-kickback projection: yes
- Purpose: electric and petrol chainsaws for home and semi-professional use
- Product/System Code: OO-ACCV91NP52
- EAN code: 5903383018349
This combination of parameters makes the chain a universal solution for most lightweight chainsaws used for everyday tasks around the house. It is a sure choice for those who want reliability, safety and low operating costs.
FAQ - Frequently asked questions about 1.3 mm 3/8" Hobby 52 link cutting chain OO-ACCV91NP52
1. For which chainsaws this chain fits?
The chain fits chainsaws whose manufacturer has stipulated the use of accessories with a 3/8" hobby pitch, a guide groove width of 1.3 mm and a number of 52 guide links. Before you buy, it's a good idea to compare these parameters with the data on the bar or in the saw's manual.
2. How often should you sharpen your chain?
Sharpening frequency depends on the intensity of work and the type of material being cut. For typical domestic use (cutting firewood, branches, small logs), it is recommended to check the sharpness after each prolonged work session. When you notice a decrease in cutting performance, it is necessary to sharpen the teeth with a file or on a sharpener.
3. Does the chain have safety features to increase operating safety?
Yes. Cutting links are equipped with anti-kickback protrusions, which reduce the risk of sudden guide bouncing (kickback). This makes working with the saw more stable and safer, which is especially important for hobby users.
4. Is the chain suitable for cutting hard wood?
Chain works best in soft and medium hard woods. It can also be used in harder grades, but in this case the teeth will wear faster and more frequent sharpening will be necessary. With very hard wood, it is recommended to keep an eye on sharpness and proper lubrication.
5. How to properly tension the chain OO-ACCV91NP52?
A properly tensioned chain should fit tightly against the bar, but allow itself to be pulled slightly away from the groove for a few millimeters with a finger. If it sags or slides completely out of the groove - it is too loose. If, on the other hand, it cannot be pulled back by hand - it is too tight, which accelerates its wear and strain on the saw.
6. Can I install this chain myself?
Yes, the installation of the chain is relatively simple and can be done by yourself, provided you follow basic safety rules. Just follow the saw's instruction manual - turn off the machine, remove the side guard, put the chain on the sprocket and bar, tighten it, then tighten the guard and check the tension after the first few cuts.
7. How to take care of a chain to make it last as long as possible?
To maximize the life of the chain, make sure it is constantly lubricated with bar oil, avoid cutting sand- or stone-soiled wood, check tension regularly, and sharpen the teeth periodically. After finishing work, it is a good idea to clean the chain of sawdust and store it in a dry place, which will protect it from corrosion.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.