CHAINSAW CUTTING CHAIN 1,3 MM 3/8" HOBBY 44 GUIDE LINKS OO-ACCV91NP44
- Victus 91NP OO-ACCV91NP44 3/8" hobby cutting chain, 1.3 mm, 44 guide links - ideal for garden and backyard saws. Provides precise, safe cutting of wood thanks to the half chisel teeth and anti-kickback links.
SAW CHAIN 1,3 MM 3/8" HOBBY 44 GUIDE LINKS OO-ACCV91NP44 - PRECISION CUTTING FOR DEMANDING USERS
Saw chain 1.3 mm 3/8" hobby 44 guide links OO-ACCV91NP44 is a high quality chain for chainsaws, ideal for home, garden and hobby applications. Designed to cut wood accurately, quickly and as safely as possible, it will work well in the hands of both the private user and the professional looking for a sturdy chain for light work.
The product is made of durable steel, and the use of semi-shear type cutting teeth and links with an anti-kickback protrusion provides comfort, reduces the risk of jerking and bouncing, and extends the life of the entire cutting set. Thanks to the 3/8" hobby parameters and 1.3 mm groove width, the chain guarantees an optimal combination of cutting speed with low resistance and lower load on the saw engine.
Victus 91NP cutting chain - what it is and why you should choose it?
The Victus 91NP cutting chain, coded OO-ACCV91NP44, is the working element of the saw responsible for the actual cutting of wood. It is formed by interconnected guide, cutting and connecting links that move along the guide at high speed. This particular model is:
Cutting chain for Victus 91NP chainsaw
- Length 44 guide links
- 3/8" hobby pitch
- Chain groove width 1.3 mm
- Semi-chisel type cutting teeth
- Cutter links with anti-reflection projection
For the user, this mainly means ease of cutting, a lot of control over the saw and reduced "kickback" effect when entering the material. It is an excellent choice for all jobs where precision, safety and repeatable results are important.
Where the OO-ACCV91NP44 chain is installed and which chainsaws it works with?
OO-ACCV91NP44 chain mounts directly on the bar of the chain saw. Fits models equipped with a 1.3 mm groove guide and adapted to 3/8" hobby pitch and 44 guide link count. This is a standard often found in:
- Electric and petrol chainsaws for home and domestic use.
- Light garden saws designed for cutting branches, firewood, boards.
- Devices of brands using the 3/8" hobby system with a 1.3 mm groove (always verify compliance with the documentation of the saw before purchasing).
Installation of the chain involves removing the side cover of the saw, applying the guide links into the groove of the guide bar and onto the sprocket, and then tensioning the chain properly using the tensioner. Proper tension ensures that the chain does not fall off the bar, while still sliding freely along the bar. A well-chosen chain, such as OO-ACCV91NP44, makes it much easier to adjust and ensures even handling.
In daily use you will mount it m.in. w:
- Saw used for preparing firewood for winter - cutting blocks and logs.
- Saw used in the construction of a gazebo, terrace or tool house - precise cutting of scantlings and construction boards.
- A small garden saw used for orchard and garden maintenance - pruning and removing branches, shaping tree crowns.
Safety and comfort - anti-kickback links and semi-shear type teeth
One of the most important advantages of the OO-ACCV91NP44 chain is the high level of user safety. The cutting links have been equipped with anti-kickback protrusions, which reduce the risk of so-called kickback, i.e., the sudden upward bounce of the saw when the bar tip comes into contact with the wood. With this:
- You have better control over the tool, even if you are not a professional lumberjack.
- Work is more predictable and less tiring for the hands and arms.
- The risk of accidents resulting from sudden jerks of the chainsaw is significantly reduced.
Semi-chisel teeth are a compromise between very aggressive full chisel teeth and softer cutting profiles. For the user, this means:
- High cutting performance - the chain efficiently copes with soft and medium-hard wood, even slightly dirty wood.
- Greater resistance to dulling than in full-length chains, especially with occasional contact with sand or bark.
- Easier to sharpen with a round file - the half-hole profile is more tolerant of minor file handling errors.
In everyday applications, you will feel it as:
- Smooth entry of the chain into the material when cutting firewood.
- Less vibration when limbing branches on a plot or in an orchard.
- Less frequent need to sharpen teeth, which saves you time and reduces service costs.
Victus 91NP 1.3 mm 3/8" hobby cutting chain - durability, performance and economy
The design of the OO-ACCV91NP44 chain provides a very favorable ratio of performance to durability. A groove width of 1.3 mm means a smaller guide link thickness, which translates into:
- Lower cutting resistance - the saw needs less power to cut the same diameter of wood.
- Less fuel or electricity consumption when cutting frequently.
- Smoother operation of the drive, thus less strain on the motor and longer life of the device.
The 3/8" hobby pitch was developed for light and medium saws where comfort and tool control are a priority. In practice:
- Working in the garden and around the house is less tiring-especially for longer cutting sessions.
- It is easier to make precise cross and rip cuts when cutting boards or scantlings.
- The saw responds more smoothly to the addition of gas, which both beginners and experienced users will appreciate.
Thanks to properly selected technical parameters, this chain allows you to prepare in a short time:
- The entire supply of firewood for the heating season.
- Construction material for wooden fences, pergolas and sheds.
- Branches and branches for shredding or disposal after major garden maintenance cuts.
Application of chain OO-ACCV91NP44 in practice - home, garden, light professional work
The 1.3 mm 3/8" hobby 44 guide link saw chain OO-ACCV91NP44 is extremely versatile in terms of application. It will be perfect for:
- Backyard work - cutting of boards, beams, beams for small repairs and DIY work.
- Preparation of firewood - cutting logs into blocks, sawing small and medium diameter timber.
- Garden and forestry work - limbing of windfalls, removal of dry and diseased branches, crown formation of fruit trees.
- Light professional use - Small jobs in gardening, municipal and service companies, where efficiency counts, but there are no extreme loads as in felling thick trees.
For the user, this means that a single chain can handle a wide range of tasks, without having to frequently change it for other types. With proper lubrication and regular sharpening, the chain will provide long and reliable service.
The most important technical data of the cutting chain OO-ACCV91NP44
- Model: Victus 91NP OO-ACCV91NP44
- Purpose: cutting chain for chainsaws
- Number of guide cells: 44
- Chain pitch: 3/8" hobby
- Guide groove width (guide link thickness): 1.3 mm
- Type of cutting teeth: semi-chisel (semi-chisel)
- Cutting links: with anti-rebound projection, reducing the risk of rebound
- Application: household work, garden work, light professional work
- Compatibility: saws with 1.3mm guide bar and 3/8" pitch hobby requiring 44 guide links
Choosing a chain with these characteristics provides the optimal combination of safety, performance, long life and low operating costs. It's an investment that quickly pays off in the form of faster operation, fewer sharpenings, and the confidence of a chainsaw in any backyard conditions.
FAQ - Frequently asked questions about 1.3 mm 3/8" hobby 44 link cutting chain OO-ACCV91NP44
1. How to check if the OO-ACCV91NP44 chain will fit my chainsaw?
To select a chain, check your chainsaw manual for three key parameters: chain pitch (3/8" hobby), bar groove width (1.3 mm) and number of guide links (44). If all values match - the string will match.
2. What jobs is this chain best suited for?
The chain is ideal for cutting firewood, gardening, limbing branches, preparing wood building material and light service work. Not designed for long-term, heavy felling of very thick logs.
3. How often should the chain be sharpened OO-ACCV91NP44?
Sharpening frequency depends on the intensity of use and working conditions. For typical household work, a light sharpening is recommended after each long cutting session. Semi-chisel teeth are more resistant to dulling, so the chain does not require as frequent sharpening as models with full chisel teeth.
4. Does the chain have safety features to increase operating safety?
Yes. Cutting links have special anti-kickback protrusions to reduce the risk of the saw bouncing when it makes improper contact with the material. In addition, the 3/8" hobby pitch promotes smoother, more controlled operation.
5. How to take care of a chain to make it last as long as possible?
Regular lubrication (a functioning oil system on the chainsaw), maintaining proper chain tension, avoiding cutting into dirt or sand, and regular sharpening are key. When you're done, it's a good idea to clean the chain of resin and shavings, and for longer storage, protect it with a fine layer of oil.
6. Can I replace the old chain myself with OO-ACCV91NP44?
Yes, replacing the chain is a service activity intended to be performed by the user himself. All you need to do is remove the saw's side cover, loosen the tensioner, remove the old chain, put the new chain on the sprocket and bar, and then tension it properly according to the saw manufacturer's instructions.
7. What I will feel when I switch from the old, worn-out chain to the new OO-ACCV91NP44?
The difference is usually very clear: the saw cuts faster, requires less pressure, the engine is not as stressed, and the cuts themselves are even and smooth. Vibration is also reduced, improving user comfort and safety.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.