ROUND CHAIN SHARPENING FILES 4.0 MM, 12 PCS OO-ACCV40000
- Professional 4.0 mm round files for sharpening chainsaw chain. Set of 12 pcs. OO-ACCV40000 hard tool steel provides precise, fast and safe sharpening of 3/8" hobby chains. Ideal for petrol and electric chainsaws.
4.0 MM ROUND CHAIN SHARPENING FILES, 12 PCS OO-ACCV40000 - PROFESSIONAL SET FOR RENEWAL OF ANY CHAIN
Round chain sharpening files 4.0 mm, 12 pcs OO-ACCV40000 is a complete set of high-quality hand files created specifically for precision sharpening of the cutting teeth of chains of petrol and electric saws. With a diameter of 4.0 mm, they are a perfect match for popular chains with finer tooth geometry, allowing them to quickly restore full sharpness and cutting performance. The set of 12 pieces guarantees long-lasting use both in a home workshop and in a professional forestry or gardening service.
What is a set of round chain files 4.0 mm OO-ACCV40000?
4.0 MM, 12 Pcs OO-ACCV40000 round chain sharpening file is a specialized hand tool, made of hard, hardened tool steel, which is designed to accurately form and renew the cutting edges of chain links. The round cross-section with a diameter of 4.0 mm allows you to guide the file confidently in the gouge of the tooth without damaging its geometry and without abrading too much material.
Each file has a uniform grain structure and an evenly cut tooth for smooth metal cutting without burrs. This makes sharpening fast, comfortable and repeatable, and once sharpened, the chain cuts wood evenly and without jerking.
Where and how to mount 4.0 mm round chain files?
Round files OO-ACCV40000 are designed for manual sharpening, so they are primarily installed in:
- chain file holders - wooden or plastic, providing a comfortable grip and the right angle of guidance,
- sharpening guides/frames - which stabilize the file on the tooth and maintain the recommended sharpening angle (usually 25-35°),
- simple vices and service grips - in workshops, service shops and forestry companies.
The installation process itself is very simple - the file is inserted into the hole of the handle or guide, secured with a clamp, and then guided along the cutting tooth from the inside out. With a standard diameter of 4.0 mm, the tool fits most popular service guide systems on the market.
Application of Round Chain Sharpening Files 4.0 MM, 12 Pcs OO-ACCV40000
The 4.0 mm file set is used wherever you work with a chainsaw or other tools equipped with a cutting chain. This is essential equipment:
- In the garden and home workshop - Regular sharpening of the chain when cutting trees, trimming firewood or cutting boards.
- In forestry and service companies - intensive chainsaw operation requires frequent and precise chain sharpening directly in the field.
- In orchards and farms - Care of orchards, removal of dry branches, preparation of firewood.
- In carpentry and joinery shops - Quickly refresh the chain on the construction site, when cutting structural elements.
Thanks to the fact that there are as many as 12 pieces in the package, the files are perfect for both the individual user and companies where several employees use the tool. Even with heavy use, the supply of files lasts for a very long time.
Key user benefits - quality, durability and reliability
When you choose the 4.0 mm round chain files OO-ACCV40000, you are investing in a tool that realistically increases the comfort and safety of working with a chainsaw:
- Higher cutting efficiency - sharp chain requires less pressure, the saw does not "get tired" and the engine runs lighter. As a result, you cut through even thick logs faster and save fuel or electricity.
- Security - Dull chain slips on wood and is more likely to cause recoil. Regular sharpening with 4.0 mm files reduces this phenomenon and allows you to maintain full control of the machine.
- Saving money - Instead of buying new chains, you can easily extend the life of the cutting set you are currently using. The file is a small cost that quickly pays for itself.
For example: during seasonal firewood preparation, you sharpen the chain every few tanks of fuel. A set of 12 files will get you through the entire season with a sharp chain, using only one or two files from the packet.
OO-ACCV40000 circular file - compatibility with popular cutting sets
The 4.0 mm files are particularly recommended for finer-toothed chains, used m.in. in hobby, garden and light professional chainsaws. They work perfectly with popular chainsaw bars and chains:
Chainsaw bar and chain set:
- Length 14"
- 3/8" hobby pitch
- Chain groove width 1.3 mm
- Tip with 9 teeth fixed with 4 rivets
- Chain 91NP 50 links, semi-cut teeth
- Guide links with anti-reflection projection
This type of configuration (14", 3/8" hobby, 1.3 mm) is commonly found on backyard chain saws and smaller petrol saws, so the OO-ACCV40000 files will be an ideal addition to the cutting set used by most home users and small service companies.
Professional ergonomics - comfortable sharpening even in the field
The set of 12 4.0 mm round files is designed to allow convenient sharpening in any conditions - in the workshop, in the forest, on the construction site or in the orchard. The slim shape and appropriate length of the files ensure:
- easy guidance on the chain tooth - Without locking in the links,
- control over the sharpening angle - especially with simple guides and handles,
- possibility to work with protective gloves - The file's diameter and standard handle allow for a secure grip even with thick work gloves.
For example, during a day's work in the woods, you can quickly sharpen the chain every few hours by making a few file strokes on each tooth. It takes just a few minutes and significantly increases cutting efficiency and reduces fatigue for the saw operator.
Technical data - 4.0 MM round chain sharpening files, 12 Pcs OO-ACCV40000
| Product type | Round chain sharpening files |
| File diameter | 4.0 mm |
| Shape | Round |
| Destination | Sharpening of saw chain cutting teeth |
| Number of pieces per package | 12 |
| Material | Hard tool steel (hardened) |
| Application | Petrol and electric chainsaws, 3/8" hobby chains, other chains compatible with 4.0 mm file |
| Product code | OO-ACCV40000 |
| EAN code | 5903383017687 |
Why choose 4.0 mm round files OO-ACCV40000 for your chain?
By opting for this set of files, you get the assurance that your saw will always be ready for intensive work. Precision craftsmanship, hard steel and as many as 12 pieces per package make it ideal for both private users and professionals:
- For owners of single-family homes - quick preparation of firewood, pruning of trees and shrubs in the garden.
- For gardening and forestry companies - A reliable set for sharpening chains in the field, without the need for frequent purchases of new files.
- For carpenters and joiners - keeping the chain in perfect condition during construction and workshop work.
Regular use of 4.0 mm chain sharpening files OO-ACCV40000 extends chain life, improves working comfort and minimizes the risk of dangerous situations. It's an investment that pays off with every fast and precise cut.
FAQ - Frequently asked questions about 4.0 mm round chain files OO-ACCV40000
Question 1: For which chains do 4.0 mm round files fit?
The 4.0mm files are designed for finer-toothed chains often found on garden and hobby saws, including popular kits with a 14" bar, 3/8" hobby pitch and 1.3mm groove width. Before using, it's a good idea to check the recommended file diameter in the chain or saw instructions.
Question 2: How often should the chain be sharpened with a file?
It is recommended to slightly sharpen the chain every few tanks of fuel or whenever you notice a decrease in the quality of the cut (dust instead of chips, the need for stronger pressure, smoke). Regular, gentle sharpening is much more beneficial than infrequent but very intense tooth grinding.
Question 3: Do you need special guides to use files?
It is not necessary, but very helpful. You can sharpen the chain "by hand", but a straight guide or handle makes it significantly easier to maintain the correct sharpening angle and ensure even operation on all teeth.
Question 4: How long does one file last?
The life of one file depends on the intensity of work, the hardness of the chain and the frequency of sharpening. For typical home use, one file can last for several full chain sharpening cycles. A set of 12 pieces provides a supply for many seasons.
Question 5: Are files suitable for beginner chainsaw users?
Yes. Round files 4.0 mm OO-ACCV40000 are very easy to use. Beginners are advised to use simple file guides, which make it easier to maintain the correct sharpening angle and quickly learn the correct technique.
Question 6: Can files be used for tools other than the chainsaw chain?
Files are mainly designed for sharpening chain teeth. In exceptional situations, they can be used for delicate corrective work on other metal parts, but they provide full efficiency and service life primarily when used as intended - for chainsaw chains.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.