CHAINSAW CUTTING CHAIN 1,5 MM 325" 64 GUIDE LINKS OO-ACCV21BP64
- Victus 21BP OO-ACCV21BP64 cutting chain (0.325", 1.5 mm, 64 guide links) for petrol and electric saws. Professional half chisel chain with anti-kickback links - fast, precise and safe wood cutting. Ideal for housework, le
Victus 21BP chainsaw cutting chain is a high-quality accessory designed for intensive work in the forest, garden and construction sites. Thanks to its precision manufacturing, half-hole type cutting teeth and links with anti-kickback protrusion, the chain provides fast, clean cutting and a high level of user safety. The OO-ACCV21BP64 is designed for users who expect maximum reliability, repeatable performance and long equipment life.
What is the cutting chain for Victus 21BP OO-ACCV21BP64 chainsaw and what makes it different?
Cutting chain OO-ACCV21BP64 is a precision-made working element of a petrol or electric saw, directly responsible for the quality and speed of cutting. This is a chain with a pitch of 0.325", a groove width of 1.5 mm and a length of 64 guide links, designed for guides with the following parameters. Semi-chisel type cutting teeth guarantee efficient, smooth cutting while reducing vibration and the risk of kickback.
The chain is made of durable tool steel, resistant to wear and thermal deformation. This makes it perfect for both occasional backyard work and frequent use by professionals - lumberjacks, carpenters, landscaping crews or municipal services.
The cutting links are equipped with an anti-kickback protrusion, which improves working comfort and increases the level of safety, especially when cutting hard wood, knots and when cutting into the trunk under heavy loads.
Where the cutting chain 1.5 mm 0.325" 64 guide links OO-ACCV21BP64 is mounted?
The OO-ACCV21BP64 chain is mounted on the bar of the chain saw. Fits models rated for 0.325" pitch and 1.5 mm groove width and requiring a 64 link guide chain. Installation is done in a standard way - by putting the chain on the sprocket, the guide bar and the appropriate tension with the help of the tensioner. The use of the correct chain parameters ensures trouble-free operation with the saw, less wear on the bar and sprockets, and operator safety.
The chain is designed primarily for Victus brand saws, but can also be used on other saws compatible with 0.325" pitch, 1.5 mm width and 64 guide link length - according to the device manufacturer's specifications. Before buying, it is a good idea to compare the parameters of the original chain or bar with the specifications of the presented model.
Examples of installation applications:
- replacing a worn chain in a petrol chainsaw used for household work,
- the armament of a saw used on a construction site to cut structural components,
- preparing the chainsaw for the firewood season - cutting firewood, fireplace blocks,
- saw equipment of service companies engaged in the care of gardens and green areas.
Use of Victus 21BP cutting chain in daily operation
Cutting chain 1.5 mm 0.325" 64 guide links OO-ACCV21BP64 will work wherever speed, precision and safety of cutting are important. Thanks to its half-chisel tooth geometry, it is an ideal compromise between aggressive, fast penetration into the wood and smooth, controlled operation with relatively low vibration levels.
Typical applications:
- preparation of firewood and firewood - cutting blocks, logs, softwood and hardwood,
- maintenance work in the garden and orchard - removal of thick branches, shortening of trunks, correction of trees after windstorms,
- forestry work - limbing, sawing logs, preparing wood for skidding,
- construction and carpentry work - cutting rafters, beams, roof truss elements,
- cleanup work after storms and storms - removal of fallen trees, branches blocking roads and pedestrian routes.
The use of links with an anti-kickback protrusion significantly improves control of the saw. The chain does not "bite" violently into the material, thus reducing the phenomenon of bar bounce, particularly dangerous for less experienced users. This translates into greater comfort, precision cutting guidance and reduced fatigue during prolonged work.
Cutting chain for Victus 21BP OO-ACCV21BP64 chainsaw - quality, durability and safety
Model OO-ACCV21BP64 belongs to the Victus 21BP line of professional cutting chains, designed for demanding users. Combination of high quality steel, precision machining and modern tooth profile provides exceptional durability and repeatable cutting results. Each link of the chain is properly hardened, which increases resistance to abrasion, while allowing repeated sharpening without losing working properties.
Semi-chisel (semi-chisel) cutting teeth are the solution of choice for professionals and home users alike. Compared to a full chisel, the half chisel is less sensitive to dirt (sand, bark residue), maintains sharpness longer and provides a smoother cut. In practice, this means less frequent sharpening and shorter downtime, which is crucial when using the saw intensively.
Cutting links with an anti-kickback protrusion reduce the aggressiveness of the chain biting into the wood, which not only improves safety, but also enables the saw to be guided more accurately, such as in format cutting, edge trimming and carpentry work. Lower vibration levels and smoother operation reduce arm and hand fatigue for the operator, which is of great importance during long hours of use.
Key features of the 1.5 mm 0.325" 64 guide link cutting chain OO-ACCV21BP64
- Graduation 0.325" - A popular standard used in many saws, providing an excellent compromise between cutting speed and smooth operation.
- Groove width 1.5 mm - Compatibility with guides of the most common width, stable guidance and less susceptibility to "pulling" the chain.
- 64 guide links - Length optimal for many mid-range saws used in households, farms and small service companies.
- Semi-chisel type cutting teeth - Longer hold of sharpness, less sensitivity to dirt, smoother cutting.
- Cutter links with anti-reflection projection - Increased occupational safety, reducing the risk of dangerous guide bounce.
- High durability of the material - Hardened tool steel, resistant to wear and overheating.
Examples of user benefits - why choose this chain?
When you choose Victus 21BP OO-ACCV21BP64 cutting chain, you not only get an accessory with proven performance, but also tangible benefits in your daily work.
- Higher cutting efficiency - the blade with a semi-shear profile allows fast yet controlled cutting of wood of different hardnesses, resulting in shorter working time and less fuel or energy consumption.
- Lower operating costs - longer chain life means less frequent new accessory purchases. The possibility of repeated sharpening without loss of tooth geometry positively affects the economy of use.
- Safety and comfort - Reduced kickback and reduced vibration means less strain on the operator and a higher level of protection when working in rough terrain.
- Versatility of applications - From simple household work, to intensive firewood cutting, to professional applications in the forest and on construction sites.
Technical data of the Victus 21BP OO-ACCV21BP64 cutting chain
- Model: OO-ACCV21BP64
- Type: chainsaw cutting chain
- Brand/Series: Victus 21BP
- Chain pitch: 0,325"
- Groove width (thickness of the guide link): 1.5 mm
- Chain length: 64 guide links
- Type of tooth: half-chisel (semi-chisel)
- Cutting links: with anti-reflection projection
- Purpose: chainsaws compatible with 0.325" / 1.5 mm / 64 guide link pitch
- EAN: 5903383018578
- Manufacturer code: OO-ACCV21BP64
Original manufacturer's description
Cutting chain for Victus 21BP chainsaw
- Length 64 guide links
- Pitch 325"
- Chain groove width 1.5 mm
- Semi-chisel type cutting teeth
- Cutter links with anti-reflection projection
How to properly use and maintain the chain OO-ACCV21BP64?
To realize the full potential of the Victus 21BP chain, it is worth following the basic rules of operation and maintenance. Regular lubrication, correct tension and regular sharpening of the teeth guarantee long and trouble-free operation.
- Chain tension - should be sized so that the chain fits snugly against the bar, but can be moved freely with a gloved hand. Too loose can fall off the guide, too tight wears out faster and overheats.
- Lubrication - use of high quality chain oil significantly extends the life of the links and bar. Check the oil level in the chainsaw tank regularly.
- Sharpening - chain with half chisel teeth is best sharpened with a file of the appropriate diameter, maintaining the angle recommended by the manufacturer. A dull chain not only reduces performance, but also increases the risk of kickbacks.
- Cleaning - after finishing work, it is a good idea to clean the chain of sawdust, resin and dirt, which prevents corrosion and prolongs its life.
FAQ - Frequently asked questions about 1.5 mm 0.325" 64 link cutting chain OO-ACCV21BP64
1. Will this chain fit my chainsaw?
The chain fits chainsaws that require a chain with a pitch of 0.325", a groove width of 1.5 mm and a length of 64 guide links. You can find this information in your chainsaw manual, on the bar or on the old chain. If the parameters are compatible - the chain will be suitable.
2. What is the difference between a half chisel tooth and a full chisel tooth?
The full chisel tooth is more aggressive and cuts faster, but it also dulls faster and stands up to dirt worse. The half-chisel tooth has a softer shape, so it stays sharp longer and performs better for everyday, all-purpose work - just the type of tooth used in the Victus 21BP OO-ACCV21BP64 chain.
3. How often should you sharpen your chain?
The frequency of sharpening depends on the intensity of work and the type of wood being cut. For typical home use, it's a good idea to lightly sharpen the chain every few tanks of fuel. If you work professionally or cut dirty, contaminated wood - you may need to sharpen more often. The symptom of a dull chain is dust instead of chips and a marked decrease in cutting speed.
4. Is the chain immediately ready for use after removal from the packaging?
Yes, the chain is sharpened at the factory and once it is properly installed and lubricated, you can start working right away. However, it is advisable to check the chain tension again after a few minutes of operation - the new chain may gently "settle" on the bar.
5. Can the chain be used to cut frozen or very hard wood?
The OO-ACCV21BP64 chain can handle hard and partially frozen wood, but expect faster blade wear. In such conditions, it is especially important to properly lubricate and check the sharpness of the teeth more frequently.
6. Is this chain suitable for professional use?
Yes, thanks to its high quality workmanship, hardened steel, half chisel teeth and anti-kickback links, the Victus 21BP OO-ACCV21BP64 chain will work well in both domestic and professional applications - in forestry, utility or construction companies.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.