CHAINSAW CUTTING CHAIN 1,5 MM 325" 56 GUIDE LINKS OO-ACCV21BP56
- Victus 21BP saw chain OO-ACCV21BP56 - pitch 0.325", thickness 1.5 mm, 56 guide links. Professional half chisel chain with anti-kickback stops, ideal for cutting firewood, garden and construction timber.
CHAINSAW CUTTING CHAIN 1,5 MM 325" 56 LINKS VICTUS OO-ACCV21BP56 - PROFESSIONAL CUTTING PRECISION FOR ANY CHAINSAW
Victus 21BP chainsaw cutting chain is a high-end accessory for petrol and electric chainsaws, designed for users who want reliability, safety and clean, precise cutting. The OO-ACCV21BP56 model, with a pitch of 0.325", a guide thickness of 1.5 mm (0.058"), and a length of 56 guide links, is perfect for both intensive professional work and backyard applications - from firewood preparation to tree care and construction work with structural timber.
Cutting chain for Victus 21BP chainsaw
- Length 56 guide links
- Pitch 325"
- Chain groove width 1.5 mm
- Semi-chisel type cutting teeth
- Cutter links with anti-reflection projection
What is 1.5 mm 325" 56 guide link saw chain OO-ACCV21BP56?
The OO-ACCV21BP56 cutting chain is the working element of the saw responsible for actually cutting through the wood. It consists of interconnected guide, cutting and connecting links, forming a closed loop that moves along a guideway. This model uses:
- 56 guide links - guaranteeing a perfect fit for guides supporting chains of this length and pitch 0.325".
- Graduation 0.325" - A popular standard in medium power saws, combining very good performance with high operating culture and low vibration levels.
- Guide link thickness 1.5 mm - Provides stable chain guidance in the bar groove and increased wear resistance.
- Semi-chisel teeth - Optimal compromise between cutting speed and long blade life, with high resistance to dulling in less favorable conditions (dirty, frozen wood).
- Cells with anti-reflection performance - Significantly increase the safety of work by reducing the risk of dangerous kickback of the saw (kickback).
This is a complete chain ready to install - just fit it to the bar on your saw and tension it properly to enjoy smooth, clean cutting of softwoods and hardwoods.
Where the Victus OO-ACCV21BP56 cutting chain is installed and with which chainsaws it works with?
The Victus OO-ACCV21BP56 cutting chain mounts on the bar of a petrol or electric saw, equipped with a 1.5 mm groove and suitable for a chain with a pitch of 0.325" and 56 guide links. This is a very popular configuration, so the chain fits many models of garden, agricultural and forestry chainsaws from different manufacturers (after checking the compatibility of parameters in the instructions of the device).
Assembly consists of:
- Removing the saw's side cover and loosening the chain tensioner.
- Insert the chain on the drive sprocket and in the groove of the guide bar, observing the correct direction of the cutting teeth.
- Pre-tensioning the chain with a tensioner.
- Tighten the nuts securing the guide and finally adjust the tension (the links should adhere to the guide, but allow you to slide out slightly by hand).
The chain will find application m.in. in chainsaws used:
- by owners of single-family homes to prepare wood for the fireplace,
- on farms during cleanup work, pruning branches and removing old trees,
- in carpentry shops and construction workshops for cutting elements of roof structures or trusses.
Use of 1.5 mm 325" 56 link Victus 21BP cutting chain in daily work
Victus OO-ACCV21BP56 cutting chain is designed as a universal solution for cutting wood of different hardness and moisture content. Thanks to its design, it is perfect for both light household work and intensive, regular use.
- Preparation of firewood - Quickly sawing logs into shorter lengths, cutting logs into billets, preparing wood for a fireplace or solid fuel boiler.
- Work in the orchard and garden - Removal of thick branches, pruning of fruit trees, cleaning up windbreaks after storms, cutting back of volunteer trees.
- Construction and carpentry applications - Cutting beams, rafters, scantlings, formwork elements, preparation of construction timber on the project site.
- Forestry and professional work - Falling of smaller trees, limbing, thinning of stored wood, logging work.
Thanks to the half chisel teeth, the chain maintains a high working culture even when the wood is slightly soiled with sand or earth, which in practice means fewer sharpening breaks and greater efficiency of work during the day.
Victus 21BP cutting chain OO-ACCV21BP56 - quality, durability and operational safety
The key advantage of the Victus 21BP chain is the combination of high-end materials and thoughtful design, which translates into real benefits for the user: longer life, less susceptibility to dulling, and greater safety when operating the chainsaw.
- Resistant alloy steel - The chain links are made of specially hardened steel, which keeps the cutting edges sharp for a long time, even under heavy use.
- Half chisel teeth with increased strength - The half-chisel shape provides stable, aggressive wood cutting while allowing faster recovery of sharpness when sharpening with a file.
- Anti-reflection performances - appropriately shaped stops, reducing the tendency of the saw to suddenly "jump" when in contact with the wood. This reduces the risk of injury to the operator and improves working comfort.
In practice, this means that the chain handles difficult material better - such as wood with little dirt - and allows for longer periods of operation between sharpening. The gain from this solution is twofold: lower cost of operation and higher productivity during the working day.
Comfort of 1.5 mm 325" 56 link chain - less vibration and smooth cutting
A modern cutting chain should not only cut quickly, but also minimize operator fatigue. The OO-ACCV21BP56 is designed to reduce vibration and ensure smooth travel on the guide bar. This is of great importance during longer work sessions - hands get less tired and the precision of cuts remains at a high level.
- Precision-made links - Even chain pitch and bar fit promotes smooth, even cutting without "jerks".
- Optimal tooth geometry - The half chisel bites into the wood more gently than an aggressive full chisel, noticeably reducing vibration and making it easier to guide the saw in a straight line.
- Stable guidance in the groove - the thickness of the guide 1.5 mm provides sufficiently rigid chain work, which translates into simpler cutting of logs, boards and beams.
When pruning branches at height, cutting wood in hard-to-reach areas, or precisely cutting structural components, less vibration directly translates into greater safety and comfort - especially for less experienced users.
How to take care of the Victus 21BP cutting chain to make it last as long as possible?
Proper operation and maintenance of the OO-ACCV21BP56 cutting chain significantly extends its life and improves cutting quality. A few simple rules will allow you to enjoy its full capabilities for a long time:
- Regular sharpening - check the sharpness of your teeth after every long run. Sharpen with a file matched to a 0.325" pitch (usually 4.8 mm), maintaining the recommended sharpening angle.
- Proper tension - too loose chain can slip off the bar, too strong - leads to overheating and faster wear. Properly tensioned chain slightly adheres to the bar and can be lifted slightly.
- Proper lubrication - always use chain lubrication oil. Lack of lubrication results in overheating, stretching and accelerated cell wear.
- Avoiding contact with soil and metal - striking a stone, concrete, wire or nail can instantly dull or damage the teeth. It's a good idea to inspect the wood before cutting and be careful when working on the ground.
By following these simple rules, you will maintain high cutting efficiency, reduce fuel consumption, and minimize the cost of servicing and replacing saw attachments.
Technical specifications of 1.5 mm 325" 56-link chainsaw cutting chain OO-ACCV21BP56
| Manufacturer/brand | Victus |
| Model | 21BP OO-ACCV21BP56 |
| Product type | Chainsaw cutting chain |
| Chain pitch | 0,325" |
| Guide link thickness | 1.5 mm (0.058") |
| Number of guide links | 56 |
| Type of cutting tooth | Semi-chisel (semi-chisel) |
| Security elements | Cutter links with anti-reflection projection |
| Application | Firewood cutting, garden, orchard, forestry and construction work |
| Product code | OO-ACCV21BP56 |
| EAN code | 5903383018561 |
FAQ - frequently asked questions about Victus OO-ACCV21BP56 cutting chain
Question 1: How to check if the OO-ACCV21BP56 chain will fit my chainsaw?
To select a chain, compare three parameters: pitch (0.325"), guide link thickness (1.5 mm) and number of guide links (56) with the data in the saw manual or on the old bar/chain. If all values match, the string will be appropriate.
Question 2: What type of wood is this chain best suited for??
Victus 21BP chain is universal - it can perfectly cope with both coniferous (spruce, pine) and deciduous (birch, oak, beech) wood. The half chisel teeth also work well in lightly soiled wood, typically used for garden or forestry cleanup work.
Question 3: How often should the chain be sharpened?
Sharpening frequency depends on work intensity and cutting conditions. For typical home use, a brief sharpening after each long day's work is recommended. If you notice that the saw cuts slower, begins to "tire" or fine dust instead of chips appears - the chain needs sharpening.
Question 4: Is this chain suitable for cutting frozen or wet wood?
Yes, half chisel type teeth are more resistant to dulling in more difficult conditions, such as wet or frozen wood. However, it is important to remember to check sharpness more often and to properly lubricate the chain with oil.
Question 5: What files are needed to sharpen this chain?
For chains with 0.325" pitch, a 4.8 mm round file is usually used. For convenience and precision, it is advisable to use a sharpening guide, which makes it easier to maintain the correct sharpening angle.
Question 6: Is the chain immediately ready for use after removal from the packaging?
Yes, the chain is factory sharpened and ready for installation. After attaching it to the saw, tension it properly and make sure the lubrication system works properly. After a short period of operation, it is a good idea to check the tension again, as the new chain may stretch minimally.
When you choose Victus OO-ACCV21BP56 1.5mm 325" 56 guide link chainsaw cutting chain, you are investing in a proven solution that combines high cutting performance, above-average durability and enhanced operational safety. It's the ideal choice for users who value quality, reliability and convenience of their chainsaw on a daily basis.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.