CHAINSAW GUIDE 180MLBK095 OO-ACCV180MLBK095
- Professional chain saw bar 18" 180MLBK095 OO-ACCV180MLBK095 (.325", 1.3 mm groove). Durable 11 tooth 4 rivet bit, ideal for narrow kerf chains. For home and professionals.
Guide bar for chainsaws 18" PROVIDER 180MLBK095 OO-ACCV180MLBK095 - precision cutting, durable construction, professional use
CHAINSAW GUIDE 180MLBK095 OO-ACCV180MLBK095 is a high-quality chainsaw guide bar designed for users who require clean, precise cutting and maximum accessory life. With a length of 18" and a pitch .325" with narrow slot is ideal for use with modern cutting chains with narrow cut widths, providing less cutting resistance, faster operation and lower fuel or energy consumption.
The guide bar is mounted directly on the chainsaw - it is the bar on which the cutting chain moves. Responsible for guidance stability and cutting accuracy, as well as operator safety. Model 180MLBK095 OO-ACCV180MLBK095 was made of durable steel, has groove width of 1.3 mm and tip with 11 teeth mounted on 4 rivets, which increases the life of the entire guide and reduces the risk of damage to the guide during intensive use.
The guide is designed to work with chains with a narrow notch gap, making it ideal for both home gardening and lighter forestry work, firewood preparation and landscaping at service companies.
Full technical description of the product:
Chain saw guide bar:
- Length 18"
- Pitch .325" narrow gap
- Chain groove width 1.3 mm
- Tip with 11 teeth fixed with 4 rivets
Guide bar suitable for use with chains with narrow notch gap
PROVIDER for saws 180MLBK095 OO-ACCV180MLBK095 - what it is and who it is for?
The presented model is professional guide for chainsaws with a length of 18 inches, designed to work with pitch chains .325" and narrow slit. It is a key cutting component of the saw, which has a direct impact on the comfort of work, the quality of the cut and the safety of the user.
PROVIDER for saws 180MLBK095 OO-ACCV180MLBK095 is designed for:
- single-family homeowners who regularly prepare firewood,
- gardeners and landscaping companies,
- small carpentry shops and workshops where the saw is used for pre-cutting logs and logs,
- semi-professional and professional users who need a solid guide in daily use.
If your chainsaw runs on a chain .325" with a guide link width of 1.3 mm, this guide will be an ideal choice - it will provide optimal fit and high operating culture.
Where the 180MLBK095 OO-ACCV180MLBK095 guide bar is mounted and how it affects the saw's operation?
Guide 180MLBK095 OO-ACCV180MLBK095 is mounted in the body of the chainsaw, between the clutch side and the chain tensioner. On its circumference moves the cutting chain, which does all the work of cutting. Proper installation and selection of the guide are crucial to:
- cutting stability - A well-fitted guide bar keeps the chain aligned to minimize "runaway" cuts and achieve even, straight cuts even in harder wood,
- user safety - The precision-machined 1.3mm groove and 11-tooth tip promote smooth operation of the chain, reducing the risk of jams and kickbacks when cutting into the material,
- life expectancy of the chainsaw - a properly selected guide reduces the load on the drivetrain, resulting in less wear and tear on the clutch, gears and the engine itself.
In practice, this means that by replacing the worn guide with a new one 180MLBK095 OO-ACCV180MLBK095, you often regain the original power and culture of your chainsaw. Cutting becomes smoother and the chain heats up less, extending its life.
Examples of use after proper installation of the guide:
- daily cutting of firewood during the heating season,
- cleanup work after windstorms - removal of fallen branches and smaller trunks,
- cutting posts and beams for sheds, gazebos, garden structures.
Application of the 18" guide .325" 1.3 mm - precision, speed and lower material consumption
Guide length 18" is a versatile compromise between portability and cutting range. It works well both for cutting thicker wood in the forest and for home applications. Pitch .325" with narrow slot has been selected to provide fast cutting with moderate saw power - ideal for all-purpose and semi-professional saws.
The most important benefits of using this guide:
- Increased productivity - Narrow notch gap means less resistance in the material and therefore faster cutting speed for the same engine load.
- Fuel or energy savings - lower resistance translates into lower combustion in petrol saws and longer run time per charge in cordless saws.
- Cleaner, narrower cut - Ideal for preparing structural components, cutting boards, beams and squared timbers where precision and minimal loss of material is important.
Typical applications of guide 180MLBK095 OO-ACCV180MLBK095:
- preparation of firewood - cutting logs into even sections,
- repair and construction work - cutting logs, beams and scantlings for wooden structures,
- garden work - pruning thick branches, removing dry branches, shaping trees and shrubs.
Durable tip with 11 teeth and 4 rivet mount - reliability in tough conditions
Guide end with 11 teeth mounted on 4 rivets was designed for intensive use. This is where the bar is under the most stress, as the chain changes direction and operates under the greatest stress.
What does such a solution provide?
- High wear resistance - more rivets mean a more stable attachment of the bit and less risk of the bit coming loose even with frequent heavy-duty work.
- Smooth running of the chain - 11 teeth on the tip ensure even distribution of forces, which reduces vibration and oscillation felt by the user.
- Safety and comfort - stable tip reduces the risk of chain "jerking" and unwanted kickback when cutting into the wood with the bar face.
In practice, the user gets a guide that can withstand prolonged work at:
- frequent cutting of hardwoods (e.g., oak, beech),
- intensive agricultural and forestry use,
- regular operation in small tree cutting and maintenance service companies.
Groove width of 1.3 mm - ideal for chains with a narrow notch gap
Width of guide groove 1.3 mm corresponds to the standard guide link width of many popular cutting chains. As a result the chain "sits" perfectly in the groove, which gives it full stability during operation.
Key advantages of the 1.3 mm groove:
- Precise chain guidance - limited lateral clearances translate into even and straight cutting lines, even when going deep into the material.
- Less wear and tear on the chain and bar - The well-fitted groove reduces side friction, so the cutting set heats up less intensively.
- Optimum fit for modern "narrow kerf" chains - designed for fast cutting with less resistance.
Such a solution works especially well with:
- precision cutting of structural components, where dimensional accuracy matters,
- long-term cutting of firewood - when efficiency and economy of work are key,
- jobs requiring multiple cuts at a single material setting (e.g., preparing serial log sections).
What distinguishes the 180MLBK095 OO-ACCV180MLBK095 chainsaw guide from other models?
The choice of a slide should not be random - it is a component that must not only fit in terms of dimensions, but also be made of suitable materials and with attention to detail. Model 180MLBK095 OO-ACCV180MLBK095 stands out from many commercially available slides due to the combination of several features:
- Universal length 18" - provides a long cutting range while maintaining the handiness and good maneuverability of the saw.
- Pitch .325" and narrow notch gap - Ideal for users looking for a balance between cutting speed and machine control.
- Precision machined 1.3 mm groove - ensures stable chain guidance and reduces the risk of excessive wear on the cutting set.
- Durable tip with 11 teeth for 4 rivets - Increases guide life in the toughest operating conditions.
These parameters make this product an excellent choice for both home users and professionals who expect reliability, repeatable cutting results and a high level of safety from a guide.
FAQ - Frequently Asked Questions about saw blade guide 180MLBK095 OO-ACCV180MLBK095
1. To which saws the 180MLBK095 guide bar fits OO-ACCV180MLBK095?
Bar fits chainsaws designed to work with 18" long, pitch chain .325" and a guide link width of 1.3 mm. Before you buy, check your chainsaw's manual or nameplate to make sure that these parameters are consistent with the device manufacturer's requirements.
2. What chains can I use with this bar?
Chains with pitch .325" i guide link width of 1.3 mm, preferably in the "narrow kerf" version (narrow notch gap). This selection will ensure maximum cutting performance and full compatibility with the guide.
3. Is this guide suitable for professional use?
Yes, thanks to the tip with 11 teeth fastened with 4 rivets and a precisely made groove of 1.3 mm, the guide can be successfully used in intensive daily work - in service companies, farms and by demanding individual users.
4. How to take care of the slide to serve as long as possible?
Check the condition of the groove and bar tip regularly, rotate the bar (up/down) from time to time so that wear is evenly distributed, use proper lubrication with chain oil, and maintain proper chain tension. Avoid working with a dull-sharpened chain - this increases the load on the bar.
5. Can I replace the guide bar on my chainsaw myself?
Yes, in most cases, replacing the guide bar is a service activity that the user can perform on his own by following the saw's instruction manual. Be sure to follow safety precautions: disconnect power (unplug the spark plug or battery), wear protective gloves, and thoroughly clean the attachment site of sawdust and dirt.
6. Will the 18" length be suitable for backyard work?
Yes, 18" is one of the most versatile slide lengths. Provides comfortable work for cutting firewood, tree care, and simple construction work with wood. At the same time, the saw remains relatively lightweight and easy to handle.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.