CHAINSAW GUIDE 160MLBK041 OO-ACCV160MLBK041
- Guide bar for VICTUS 160MLBK041 chainsaws (16", .325", 1.3 mm) with narrow cutting gap. Durable tip with 11 teeth on 4 rivets for precise, fast and economical wood cutting.
GUIDE for chainsaws 160MLBK041 OO-ACCV160MLBK041 - professional 16" guide for chainsaws with narrow cutting gap
Chainsaw bar 160MLBK041 OO-ACCV160MLBK041 is a high quality work piece for chainsaws, designed to cut wood accurately, quickly and at the same time economically. It is on the bar that the cutting chain rests - thanks to it it is possible to guide the cut steadily, without "beating", overheating of the chain or excessive vibration. This model will be suitable for both domestic work and professional applications in orchards, carpentry workshops and light to medium-duty forestry work.
The guide bar is installed in place of the factory saw bar, directly into the body of the machine, in the mounting slot and around the clutch and chain tensioner. When you choose the 160MLBK041 chainsaw guide bar OO-ACCV160MLBK041, you gain compatibility with chains with a narrow notch gap, which translates into lower cutting resistance, lower fuel or electricity consumption, and higher working efficiency.
Chain saw guide bar:
- Length 16"
- Pitch .325" narrow gap
- Chain groove width 1.3 mm
- Tip with 11 teeth fixed with 4 rivets
Guide bar suitable for use with chains with narrow notch gap
The 160MLBK041 chainsaw guide - what it is and why it's crucial for effective cutting?
Guide bar for saws 160MLBK041 OO-ACCV160MLBK041 is a metal bar on which the cutting chain of your chainsaw runs. This is one of the most important operating components of the machine - it is responsible for the direction of the cut, its accuracy, the safety of the operation and the life of the chain. High-quality guide bar provides smooth, stable operation, reduces the risk of chain jamming and reduces chain wear.
The 16" long model is a versatile choice for most light to medium domestic and professional work. This length allows you to comfortably cut firewood, branches, boughs or medium-thick logs, while offering good control of the tool. In addition, the special design with a narrow cutting gap makes the chain cut less material, so the saw consumes less energy and the cutting itself is faster and with less resistance.
The 160MLBK041 guide is designed to meet the needs of both hobby users and professionals - carpenters, pavers, carpenters, orchardists or garden company workers. It is the ideal choice for those who want reliability, reproducible results and safe operation.
Guide bar assembly 160MLBK041 OO-ACCV160MLBK041 - easy replacement and compatibility with chains .325" 1.3 mm
PROVIDER GUIDE FOR SPRINGSHARES 160MLBK041 OO-ACCV160MLBK041 is designed for installation in chainsaws adapted to work with pitch chains .325" and a guide link width of 1.3 mm. It is installed in place of the old guide bar - on the mounting pins in the body of the saw, adjacent to the clutch and chain tensioner. Thanks to the standard hole layout and precise design, replacement is simple and requires no special tools - just a wrench for the clutch drum cover bolts and a standard tensioner adjustment.
The narrow 1.3 mm groove guarantees secure chain guidance, which is especially important for precision cutting, such as cutting squared timber, boards or preparing firewood of uniform lengths. Correct installation of the bar ensures that the chain remains aligned and minimizes the risk of chain dropping, which translates into user safety.
Practical examples of the use of a well-chosen and correctly installed 160MLBK041 OO-ACCV160MLBK041 guide:
- Seasonal preparation of firewood - stable chain guidance allows you to evenly cut logs and trunks into sections of the required length.
- Maintenance work in the orchard or garden - precise shortening of tree branches, cutting dry branches and shaping tree crowns.
- Light construction and carpentry work - cutting beams, columns or structural planks, where a clean, even cut is important.
APPLICATION OF PROVIDER FOR 160MLBK041 saws OO-ACCV160MLBK041 - efficient cutting at home, in the garden and at work
The 160MLBK041 OO-ACCV160MLBK041 guide bar is optimized for use with chains with a narrow notch gap. In practice, this means that with the same effort of the operator and the same power of the saw, a faster cutting speed and less fuel or electricity consumption can be achieved. The narrower width of the cut reduces the amount of chips, which is advantageous in daily use, especially for frequent and long-lasting cuts.
Applications of the guide bar PROVIDER for saws 160MLBK041 OO-ACCV160MLBK041 include a wide range of work:
- Backyard work - Cutting firewood, pruning trees and shrubs, cleaning up the plot after windstorms, removing fallen branches.
- Orchard and gardening work - Crown formation of fruit trees, removal of diseased and dry branches, preparation of woodchips.
- Joinery and carpentry workshops - precise cutting of structural elements, preparation of wood for roof trusses, gazebos, terraces and sheds.
- Light forestry work - limbing of logs, thinning of medium thickness timber, preparation of logs for skidding.
With a suitable length of 16" and a narrow cutting gap, the guide allows the saw to be maneuvered efficiently even in densely wooded terrain or in confined spaces - such as around buildings or in tight attics during carpentry work. This translates into more comfortable working conditions and less operator fatigue.
Sturdy tip with 11 teeth - durability and safety for working with the 160MLBK041 guide
The essential element of the 160MLBK041 saw blade guide OO-ACCV160MLBK041 is a durable tip with 11 teeth, fastened with as many as 4 rivets. Such a design solution increases the resistance to overloading and ensures long-term, trouble-free operation even under intensive use. The higher number of rivets stabilizes the tip, minimizes the risk of tip pitching and reduces backlash that could lead to uneven chain operation.
The 11-tooth tip provides smooth chain guidance on the curve, which is especially important for angled cuts, limbing branches or cutting through logs in hard-to-reach areas. Higher operating culture reduces the tendency of the saw to so-called "kicks" (sudden jerks), giving the operator more control over the machine.
Examples of situations where a solid guide tip is critical:
- Limbing branches overhead - stable chain path reduces the risk of uncontrolled bounce.
- Cutting structural beams at an angle - smooth entry and exit of the chain from the material promotes cutting precision.
- Working in hard wood (e.g. oak, beech) - the durable tip can withstand higher loads without deformation.
Guide bar for VICTUS 160MLBK041 chainsaws OO-ACCV160MLBK041 - quality, precision and comfort at work
Chain saw guide bar VICTUS 160MLBK041 OO-ACCV160MLBK041 (16", pitch .325", 1.3 mm groove) is designed for maximum user comfort. Carefully selected bar body material provides adequate rigidity, resistance to thermal deformation and good heat dissipation, which has a direct impact on the life of both the bar and chain. The use of a narrow cutting gap combined with refined tip geometry translates into low drag and smooth chain travel.
From the user's point of view, the key points are primarily:
- Cutting quality - even, clean rows make it easier to further process the wood, stack it or fit structural elements.
- Comfort and ergonomics - lightweight but rigid guides reduce hand and shoulder fatigue during prolonged work.
- Security - Stable chain guidance, secure cutting path and reduced vibration reduce the risk of accidents.
This works well for daily tasks such as:
- Regular firewood cutting for a single-family home.
- Maintaining greenery in a farm, horticultural or municipal company.
- Construction or repair of wooden structures (sheds, garages, gazebos, pergolas).
Technical data of the guide bar for saws 160MLBK041 OO-ACCV160MLBK041
| Model | 160MLBK041 / OO-ACCV160MLBK041 |
| Destination | Chainsaw guide bar |
| Guide length | 16" (approx. 40 cm) |
| Chain pitch | .325" (narrow gap) |
| Groove width | 1.3 mm |
| Guide end | 11 teeth, fixed with 4 rivets |
| Chain type | Chains with narrow slot, pitch .325" / 1.3 mm |
| Application | Household work, gardening, orchard work, light forestry work, carpentry and joinery |
| EAN code | 5903383018684 |
FAQ - frequently asked questions about the 160MLBK041 guide OO-ACCV160MLBK041
1. To which saws the 160MLBK041 guide bar fits OO-ACCV160MLBK041?
The bar is designed for chainsaws that work with pitch chains .325" and a guide link width of 1.3 mm. Before buying, it's a good idea to check the saw's manual or nameplate to see if the manufacturer allows the use of a 16" bar with these specifications.
2. Can I use this guide with a chain width other than 1.3 mm?
No, the guide bar is designed to work with chains with a guide link width of 1.3 mm. Using a wider or narrower chain can lead to improper operation, excessive bar wear or even dangerous cutting situations.
3. How often should you replace the guide bar on your chainsaw?
The frequency of replacement depends on the intensity of use, the type of material being cut and the quality of chain lubrication. Symptoms of guide wear are m.in. uneven cut, tendency of the chain to "pull" to one side, visible grooves in the groove or deformation of the tip. In case of intensive use, it is recommended to regularly inspect and, if necessary, replace the guide with a new one, such as 160MLBK041 OO-ACCV160MLBK041.
4. Do you need special tools to install this guide?
No, the installation of the guide is done with standard tools - usually a wrench to loosen the nuts of the clutch cover / drum and a screwdriver or wrench to adjust the chain tensioner. It is always a good idea to follow the instruction manual of the chainsaw and work with the engine turned off and with the spark plug disconnected (in petrol chainsaws).
5. How to take care of the 160MLBK041 OO-ACCV160MLBK041 guide to serve as long as possible?
The basics are proper chain lubrication, regular cleaning of the bar groove from chips and dirt, and periodic inversion of the bar (swapping the top with the bottom) to ensure even wear. It is also important to take care of proper chain tension and use chains designed for a narrow cutting gap (.325" / 1.3 mm).
6. Will 16" length be suitable for cutting thick logs?
The 16" length will comfortably cut wood with diameters typically used for backyard, orchard and light forestry work. For very thick logs, cuts can be made on two sides, but for intensive cutting of very thick logs, longer guides are more often used. For most home users, the 16" length is the optimal compromise between performance and handiness of the saw.
7. Is the 160MLBK041 OO-ACCV160MLBK041 guide suitable for hardwood work?
Yes, the sturdy 11-tooth tip attached with 4 rivets and the narrow cutting gap make the guide also work well with harder woods. However, it is crucial to use a proper, well-sharpened chain and to properly lubricate the cutting unit.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.