CHAINSAW GUIDE 158SLGK041 OO-ACCV158SLGK041
- Professional chain saw guide bar 15" 158SLGK041 (.325", 1.5 mm) with tip on 12-tooth sprocket. Ideal for garden and forestry work, provides precise, fast and safe cutting. EAN 5903383009781.
Chainsaw bar 158SLGK041 OO-ACCV158SLGK041 is a high-quality work piece designed for intensive woodworking operations. With an optimized length of 15 inches, pitch .325" and a groove width of 1.5 mm, the guide enables precise, fast and safe cutting in all conditions - from the home garden to professional forestry applications.
What is the guide for the 158SLGK041 OO-ACCV158SLGK041 chainsaw?
This is the metal structural component of the chainsaw on which the cutting chain travels. Responsible for stable chain guidance, maintaining proper chain tension, and transferring power from the saw drive to the wood. The right choice of guide bar determines the efficiency of the work, the comfort of the user and the life of the whole saw.
Where the 158SLGK041 guide is mounted OO-ACCV158SLGK041?
The guide bar is mounted directly to the body of the chainsaw - in place of the clutch and chain drive output. It is attached using the factory bolts and nuts found on the saw, and then a matching pitch cutting chain is fitted .325" and 1.5 mm wide. The end of the bar is equipped with a sprocket with 12 teeth set on four rivets, which ensures smooth running of the chain and less cutting resistance.
Application of guide bar for chainsaws 158SLGK041 OO-ACCV158SLGK041
The guide bar is designed for standard chainsaws working with pitch chains .325". It will be ideal for both light garden work and more demanding tasks:
- pruning branches and tree branches,
- preparing firewood (cutting blocks, logs),
- cleanup work after storms and windstorms,
- light and medium forestry and orchard work,
- cutting planks, beams and structural elements made of wood.
Professional chain saw bar 158SLGK041 OO-ACCV158SLGK041 - length 15", pitch .325", 1.5 mm groove
The 158SLGK041 OO-ACCV158SLGK041 guide is designed to achieve the best possible cutting performance while maintaining high durability. Length 15" (approx. 38 cm) is a universal size that provides comfortable work and full control of the tool for both amateur users and professionals.
Three key features of this guide:
- Optimum length 15" - Allows you to precisely cut firewood, shorten beams and boards or care for trees in the garden. The guide bar is not too long, so the saw remains handy and the operator has better control over the cut, which translates into safety.
- Chain pitch .325" - one of the most popular scales in universal saws. Provides a good compromise between cutting aggressiveness and operating culture. This makes the saw less "jerky" and the cut is smooth - ideal for trimming branches or preparing firewood.
- Groove width 1.5 mm - Fits the most commonly used chains on medium power saws. The appropriate width of the groove guarantees stable chain guidance, prevents the chain from "floating" from side to side and increases the accuracy of the cut, which is especially important when cutting wood structural components.
Examples of daily use:
- the owner of a single-family house prepares several meters of firewood for the heating season by cutting logs into even sections,
- the gardener trims the thicker branches of ornamental and fruit trees, taking care of the aesthetics of the garden,
- dIY cut beams and scantlings for the construction of a gazebo, shed or wooden fence.
Durable tip design - 12-tooth sprocket on 4 rivets for smooth chain running
The 158SLGK041 OO-ACCV158SLGK041 bar tip is equipped with a heavy-duty sprocket with 12 teeth, fixed with four rivets. This design significantly increases the life of the component and ensures smooth operation of the chain even during prolonged loading.
The three most important advantages of the pinion tip:
- Smoother running chain - A guide sprocket at the end of the bar reduces friction and resistance to chain movement, making it easier to enter the material. As a result, the saw requires less clamping force and the user tires less, especially when working for long periods of time.
- Less wear and tear on the chain and bar - the use of a 12-tooth sprocket distributes the load over a larger number of points, reducing local wear and tear. This translates into longer life for both the chain and the bar, and therefore lower operating costs in the long run.
- Stable mounting on 4 rivets - Solid connection of the tip to the bar body reduces the risk of backlash and deformation during intensive work. This is especially important when cutting harder wood or when using the saw frequently in forestry conditions.
Application in practice:
- when cutting thick logs and harder woods, where standard guides can wear out faster,
- in service work (such as logging and tree care companies), where the saw is used daily and requires maximum reliability,
- when preparing significant amounts of fuel - the sprocket reduces the heating of the bar tip, which reduces the risk of chain seizure.
Comfort, safety and precision - the practical benefits of using the 158SLGK041 OO-ACCV158SLGK041 guide
Chainsaw bar 158SLGK041 OO-ACCV158SLGK041 is designed to enhance user comfort and safety while ensuring high cutting accuracy. The right geometry, fit with popular chains, and careful workmanship make it an excellent choice for both seasonal and regular work.
Three key user benefits:
- More control over the tool - well-chosen length and profile of the guide bar make it easier to guide the saw in the cutting line. This is important when cutting structural components or cutting wood into even sections, where accuracy counts.
- Higher level of security - stable chain guidance and less vibration reduce the risk of kickback and accidental "jamming" of the bar in the material. The user can work more confidently and calmly, even with more demanding tasks.
- Comfort for longer work - Smooth running chain and less cutting resistance means less hand and shoulder fatigue. This is important when preparing firewood for hours or doing intensive gardening work.
Daily applications where you will feel the difference:
- regular cleaning of the orchard or plot - cutting back volunteer trees, pruning dry branches, shaping tree crowns,
- construction and renovation - cutting rafters, beams and other wooden elements to size,
- work around the farm - preparing firewood, cutting piles and elements for fences, sheds or gazebos.
Technical specifications of chain saw guide bar 158SLGK041 OO-ACCV158SLGK041
Below is a set of available technical parameters of the product:
- Product type: chainsaw guide bar
- Guide length: 15" (approx. 38 cm)
- Chain pitch: .325"
- Chain groove width: 1.5 mm
- Guide tip: 12-tooth sprocket
- Tip attachment: 4 rivets
- Purpose: chain saws that work with chains .325" with a width of 1.5 mm
- Product code: 158SLGK041
- External system code: OO-ACCV158SLGK041
- EAN code: 5903383009781
Thanks to such selected parameters, the guide is compatible with a wide range of saws available on the market. Before you buy, however, it's a good idea to check your saw's manual for the recommended bar parameters (length, pitch, groove width) and mounting type.
Manufacturer's description - chain saw bar 158SLGK041 OO-ACCV158SLGK041
Chain saw guide bar:
- Length 15"
- Pitch .325"
- Chain groove width 1.5 mm
- Tip with 12 teeth fixed with 4 rivets
FAQ - Frequently asked questions about the 158SLGK041 OO-ACCV158SLGK041 guide
1. To which saws the 158SLGK041 guide bar fits OO-ACCV158SLGK041?
Bar fits chainsaws designed to use 15" long bars and pitch chains .325" and 1.5 mm wide. Before buying, it's a good idea to check your chainsaw's manual to see what bar lengths and chain specifications the manufacturer recommends, and whether the bar mounting method is compatible.
2. What chain should I use with this guide?
With the 158SLGK041 OO-ACCV158SLGK041 guide bar, use a cutting chain with a pitch of .325" and a guide link width of 1.5 mm. An improperly selected chain can cause excessive wear on the bar, a decrease in cutting performance and an increased risk of accidents.
3. Is 15" length enough for forestry work?
The 15" length is fully sufficient for most light to medium forestry work, such as limbing, cutting medium-thick logs and preparing firewood. For very thick trunks, longer guides are usually used, but the 15" remains a versatile choice that combines mobility, precision and convenience.
4. How to take care of the slide to serve as long as possible?
Regularly clean the guide groove and lubrication holes, check the condition of the sprocket on the tip, and periodically rotate the guide (up and down) so that wear is uniform. It is also important to maintain proper chain tension and use the right oil to lubricate the cutting system.
5. Can I replace the guide bar on my chainsaw myself?
Yes, replacing the guide bar is a service activity that most users can do themselves, following the instructions of the chainsaw manufacturer. Take care to properly disconnect the power supply (on electric models) or turn off the engine and lock the ignition (on petrol saws), then unscrew the mount, remove the chain and bar, install a new one and put the chain back on, setting the correct tension.
6. Is this guide suitable for professional applications?
Parameters of guide 158SLGK041 OO-ACCV158SLGK041 (length 15", pitch .325", 12-tooth sprocket on 4 rivets) make it ideal for both intensive home use and semi-professional and service applications, such as small gardening companies and tree care crews.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.