CHAINSAW GUIDE 150MLBK041 OO-ACCV150MLBK041
- GUIDE for saws 150MLBK041 OO-ACCV150MLBK041 - professional guide bar 15" .325" 1.3 mm with a narrow notch gap. Provides precise cutting, less resistance, saving saw power and high durability. Ideal for garden, forestry and construction work
SPRINKLER BAR 150MLBK041 OO-ACCV150MLBK041 - professional 15" guide bar for chain saws with narrow cut gap
CHAINSAW GUIDE 150MLBK041 OO-ACCV150MLBK041 is a high-end chain saw guide bar designed for users who value precision cutting, durability and reliability during intensive work. With a length of 15 inches, a narrow notch gap, and a precision-made tip with 11 teeth attached by 4 rivets, it is ideal for both home gardening and professional service or forestry applications.
Chain saw guide bar:
- Length 15"
- Pitch .325" narrow gap
- Chain groove width 1.3 mm
- Tip with 11 teeth fixed with 4 rivets
Guide bar suitable for use with chains with narrow notch gap
What it is 150MLBK041 CHAINSAW GUIDE OO-ACCV150MLBK041? This is the working element of the chainsaw that guides the cutting chain and is responsible for stability, precision and safety during cutting. Properly selected guide ensures even load distribution, smooth operation and longer life of the entire device.
Where the 150MLBK041 guide is mounted OO-ACCV150MLBK041? The guide bar is mounted in the front of the chainsaw body, where the factory bar is attached. After putting the right chain on it (with the right pitch .325" and a width of 1.3 mm) and correct tension, forms a complete cutting system ready to work in wood.
Application: The guide is designed for precision wood cutting - from pruning branches and boughs, to preparing firewood, to light to medium-duty forestry or construction work. Thanks to its narrow notch gap, it will prove itself wherever high productivity is important while reducing material loss and lowering the power requirements of the saw.
Guide bar for Victus 150MLBK041 chainsaws - precision cutting, narrow gap and saving the power of the chainsaw
One of the key features of the 150MLBK041 chainsaw guide bar is the use of scale .325" with narrow slot. This means that the bar works with modern chains with a smaller notch width, which brings specific benefits to the user:
- Greater cutting efficiency - A narrower slot means less resistance during operation, so the saw cuts faster and lighter, and the operator gets less tired on longer sessions.
- Lower fuel and energy consumption - Reduced drag translates into less strain on the engine, which helps reduce combustion in petrol saws and energy consumption in electric and cordless saws.
- More precise cuts - narrow slot makes it easy to make accurate cuts, useful for preparing construction wood, cutting boards, pallets or garden landscaping elements.
In practice, this means that the guide works perfectly when preparing firewood,pruning branches and tree branches, or cutting scantlings and beams for the construction of shelters, fences or gazebos. Lower cutting resistance will be felt especially by users of medium-powered saws who want to maximize the potential of their machine.
15" length and 1.3 mm groove - the perfect combination of mobility and performance
Guide length 15" (approx. 38 cm) is a universal compromise between cutting range and ease of use. This size is excellent for everyday work around the house, in the orchard or on the farm:
- Easy maneuvering of the saw - shorter guide bar allows better control of the tool, which is especially important when precisely cutting branches overhead, in dense bushes or near obstacles.
- Optimum length for most trunks - 15" allows you to comfortably cut through medium-thick trunks and logs typical of home gardening work.
- Groove 1.3 mm - Closely matched to chains of the appropriate width, provides stable guidance of the links, reduces the risk of chain "floating" and minimizes vibrations transmitted to the operator's hands.
In everyday use, this configuration guarantees high portability chainsaws, yet sufficient length for cutting firewood, preparing material for wooden structures or removing the effects of windstorms in the garden (broken branches, fallen smaller trees).
Bit with 11 teeth fixed with 4 rivets - durability, smooth running of the chain and safe operation
Used in the guide tip with 11 teeth fixed with 4 rivets is a solution typical of higher-end chainsaw accessories. This design brings tangible benefits to the user:
- Smooth movement of the chain along the bar nose - A higher number of roller teeth improves pressure distribution, resulting in less chain link wear and more stable operation when entering the material.
- High durability of the tip - 4-rivet fastening ensures solid bonding of elements, reduces the risk of loosening during intensive use, and increases resistance to vibration and impact.
- Enhanced user safety - Smooth chain guidance and reduced risk of chain jamming in the nose reduce the likelihood of sudden jerks that can result in loss of control of the saw.
In practice, this solution will be appreciated by users who often work in demanding conditions - such as. when limbing trees after felling,cutting hardwoods whether preparing thicker construction material. The guide maintains stability and smoothness of operation even with longer, continuous cuts.
Use of guide 150MLBK041 OO-ACCV150MLBK041 in daily work - from garden to professional services
Versatility of the guide 150MLBK041 OO-ACCV150MLBK041 makes it applicable in many situations - both in the hands of a hobbyist user and a professional. Its design, narrow slot and 15" length make it an excellent choice for:
- Garden and household work - pruning of branches, crown molding, removal of dry branches, cutting of shrubs and smaller trunks.
- Preparation of firewood - Quickly cut logs to the right length, split thick branches, prepare wood supplies for the heating season.
- Repair and construction works - trimming beams, scantlings, fence posts, structural elements of gazebos, sheds or wooden terraces.
Thanks to its adaptation to chains with a narrow notch gap the guide will be particularly useful for those looking for a combination of lightweight operation, fuel economy and precise cutting results. It's a great choice for homeowners, allotment owners, farmers and landscaping service providers.
The most important technical data of the 150MLBK041 OO-ACCV150MLBK041 chainsaw guide
| Model | 150MLBK041 OO-ACCV150MLBK041 |
| Product type | Chainsaw guide bar |
| Guide length | 15" (approx. 38 cm) |
| Chain pitch | .325" (narrow gap) |
| Groove width | 1.3 mm |
| Guide end | 11 teeth, 4 rivet mount |
| Chain type | Chains with narrow notch gap, matched to pitch .325" and 1.3 mm wide |
| EAN code | 5903383018301 |
| Manufacturer/system code | OO-ACCV150MLBK041 |
When selecting a guide for your chainsaw, always pay attention to the compatibility of the pitch, groove width and mounting system. The 150MLBK041 guide bar is designed for chainsaws that work with chains .325" / 1.3 mm with a narrow notch gap - so you get maximum productivity and safety on the job.
Why choose the 150MLBK041 OO-ACCV150MLBK041 guide bar for your chainsaw?
Choosing the right guide bar has a direct impact on convenience, speed and safety of saw operation. Model 150MLBK041 OO-ACCV150MLBK041 is a product that combines a number of advantages relevant to the discerning user:
- High durability and solid workmanship - precisely made tip with 11 teeth, reinforced with 4 rivets, is a guarantee of long and trouble-free operation.
- Work comfort - The 15" length and narrow notch gap reduce stress on the engine and operator, which is especially important for frequent, repetitive cuts.
- Universal application - the guide will prove useful in the garden, on the allotment, in the forest, on the farm and in service work related to the care of trees and greenery.
With the combination of these features, 150MLBK041 CHAINSAW GUIDE OO-ACCV150MLBK041 is an excellent choice for those looking for a reliable, durable and effective accessory for their chainsaw, and at the same time want to maintain the high precision and culture of the machine.
FAQ - Frequently Asked Questions about the 150MLBK041 saw guide OO-ACCV150MLBK041
1. To which saws the 150MLBK041 guide bar fits OO-ACCV150MLBK041?
The bar fits chainsaws designed to work with pitch chains .325" and width 1.3 mm and with a suitable mounting system. Before buying, it's a good idea to check in the manual of the saw or on the old guide bar what parameters and type of attachment are required by the manufacturer of the device.
2. Can I use a chain other than .325" / 1.3 mm?
Not. For safety and proper operation of the chainsaw, use a chain with pitch .325" and 1.3 mm wide, fitted to the guide groove. Using a different type of chain can lead to faster wear of components, deterioration of cutting quality and even dangerous situations during operation.
3. How to take care of the 150MLBK041 guide to serve as long as possible?
It is recommended to regularly to check the chain tension, maintaining adequate lubrication (efficient saw oil system), periodic cleaning the guide groove from sawdust and debris and turning the guide (swapping top with bottom) every so often to evenly distribute wear and tear. This will significantly extend its service life.
4. Is 15" length enough for forestry work?
Length 15" is fully sufficient for debarking, limbing and cutting medium-thick logs. For very thick trees, professional lumberjacks often choose longer guides, but for most standard forestry and backyard work, the 15" size is the optimal and universal solution.
5. Does the guide work with chains with a narrow notch gap?
Yes. Guide 150MLBK041 OO-ACCV150MLBK041 has been expressly adapted to work with chains with a narrow notch gap, which provides less drag, higher efficiency, and fuel or energy savings while maintaining high cut quality.
6. Is the installation of the guide complicated?
Installation of the bar is simple and follows the same process as for standard models: remove the side cover of the saw, remove the old bar and chain, install the new 150MLBK041 bar, apply the appropriate chain, then adjust its tension and install the cover. You will find detailed installation instructions in the documentation of your chainsaw.
7. Is the guide suitable for cordless saws?
If your cordless saw is factory-adapted for chain .325" / 1.3 mm and has a compatible mounting system, the 150MLBK041 guide will be a very good choice. The narrow notch gap is particularly beneficial for the operating time on a single battery charge, because it reduces cutting resistance.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.