- Professional chain saw bar 140SPEA041 OO-ACCV140SPEA041 - 14" long, 3/8" hobby pitch, 1.3 mm groove. Ideal for petrol and electric chainsaws, for cutting firewood, branches and garden work. EAN code 5903383017830.
PROWADNICA DO PILAREK 140SPEA041 OO-ACCV140SPEA041 – profesjonalna prowadnica 14" 3/8" hobby 1,3 mm dla wymagających użytkowników
CHAINSAW GUIDE 140SPEA041 OO-ACCV140SPEA041 is a sturdy, precision-made chainsaw bar, designed for users who value reliability, safety and high equipment performance culture. With its 14" length, 3/8" hobby chain pitch and 1.3mm wide groove, it is ideal for both home orchard and professional gardening, service and woodworking applications.
The bar is compatible with popular chainsaws (petrol and electric), equipped with a 9-tooth tip mounted with 4 rivets, which guarantees stability, smooth chain guidance and long service life even under heavy use. It is the ideal choice as a replacement part or additional guide for everyday work in cutting wood, branches, boards or structural beams.
What is the chain saw guide 140SPEA041 OO-ACCV140SPEA041?
The guide bar for chainsaws is a key working component of the saw - it's on it that the cutting chain travels. Model 140SPEA041 OO-ACCV140SPEA041 is designed to provide high precision cutting, low vibration and optimum chain cooling and lubrication.
Built-in tip with 9 teeth, mounted with 4 rivets, increases the durability of the part most exposed to stress and temperature. Thanks to this, the guide maintains its parameters for a long time, which reduces the need for frequent replacements and translates into real savings for the user.
Standard length 14" (about 35 cm) makes the bar ideal for typical home and garden work, while allowing a high level of safety and convenience in operating the saw - even in dense gardens or when cutting at height.
Where the 140SPEA041 guide is mounted OO-ACCV140SPEA041?
Guide 140SPEA041 OO-ACCV140SPEA041 it is designed for installation in chain saws whose design and parameters are adapted to:
- guide lengths 14",
- 3/8" hobby chain pitches,
- chain groove width 1.3 mm.
It installs in place of the factory saw bar - using standard mounting screws and a chain tensioner. Simply dismantle the old bar and chain, clean the mounting space of swarf, residual oil and debris, then install a new bar, apply a chain with the appropriate parameters and adjust its tension.
It is a component compatible with many popular models of saws of the hobby and semi-professional segment - both gasoline and electric - that run on a lightweight chain with a thickness of 1.3 mm. Thus, the guide can be used as a replacement or a second cutting set, for example, for a different type of cutting.
Chain saw bar application 140SPEA041 OO-ACCV140SPEA041
The guide is designed for versatile use in gardening, home improvement and light carpentry work. It will work well for, among other things:
- cutting firewood - Preparing log billets with a diameter adapted to the length of the 14" guide, ideal for fireplaces, stoves and garden hearths,
- care of trees and shrubs - Shortening and removal of thick branches, crown molding, removal of diseased or dry branches,
- assembly and construction work - Cutting beams, roof battens, structural boards and elements of small garden architecture (sheds, gazebos, pergolas),
- cleanup work after windstorms - Quick removal of fallen branches and trees from driveways, paths and recreational areas,
- hobby and DIY applications - Preparation of wood material for DIY projects, garden furniture, fences, boxes, pots or tool houses.
Due to its parameters, it is an ideal guide for users looking for a compromise between handiness,security i cutting performance.
PROVIDER for saws 140SPEA041 OO-ACCV140SPEA041 - key features that increase comfort and safety at work
Model 140SPEA041 OO-ACCV140SPEA041 is distinguished by a number of features that translate directly into convenience of use of the saw and quality of cutting.
- 14" length - the perfect compromise between reach and control
The length of the guide about 35 cm allows you to freely perform most typical household work. It is sufficient for cutting branches, moderate-diameter logs or construction boards, while not putting undue strain on the chainsaw. This keeps the tool handy and reduces the risk of accidental recoil (kickback) compared to extra-long guides. - 3/8" hobby pitch - less vibration, more control
Application of pitch chain 3/8" hobby is particularly beneficial for occasional and intermediate users. Such a chain is characterized by less aggressiveness of cutting, which translates into better control of the cutting path, less strain on the engine and increased comfort, especially for longer work. Less vibration also means less hand fatigue. - Groove width of 1.3 mm - lightweight cutting set and more efficient operation
Groove width 1.3 mm it is dedicated to work with lightweight, narrow chains that require less power to drive. As a result, the saw comes into gear more quickly and the engine runs more steadily - even on models with smaller capacity and horsepower. This solution is particularly beneficial when cutting finer wood, where speed of work and saving fuel or electricity is important.

Durability and reliability of the 140SPEA041 OO-ACCV140SPEA041 guide in daily operation
The reliability of the guide bar is crucial to the safety and operating costs of the chainsaw. Model 140SPEA041 OO-ACCV140SPEA041 has been designed to withstand intensive work in changing conditions.
- Tip with 9 teeth fixed with 4 rivets
The end of the guide is the place most exposed to mechanical stress and heating. Application of the tip with 9 teeth, firmly fixed on 4 rivets, minimizes the risk of deformation, excessive wear and tear, and damage from overloading. This is especially important when cutting harder woods or working under heavier pressure. - Stable chain guidance
Precision-machined groove with a width of 1.3 mm provides optimal chain guidance, which protects the chain from popping and uneven wear. The result is a cleaner, straighter cut, less risk of jamming, and longer life for the entire cutting set. - Adaptable for intensive household work
The guide will work well both in the hands of a hobbyist and a more demanding user - such as a farmer, fruit grower, forest owner or gardening company. It can be used for regular firewood preparation, seasonal tree care, as well as ad hoc repairs to wooden structures.
Technical parameters of the guide bar for saws 140SPEA041 OO-ACCV140SPEA041
Below is a set of key technical data relevant to the selection of a guide bar for a specific saw:
- Purpose: chainsaw guide bar
- Guide length: 14" (approx. 35 cm)
- Chain pitch: 3/8" hobby
- Chain groove width: 1.3 mm
- Guide tip: with 9 teeth
- Tip attachment: 4 rivets
- Product code/model: 140SPEA041
- External system code: OO-ACCV140SPEA041
- EAN code: 5903383017830
Before you buy, it's a good idea to compare the above parameters with the data found in the saw's manual or on the nameplate to ensure full compatibility - especially in terms of bar length, chain pitch and groove width.
Benefits of choosing 140SPEA041 OO-ACCV140SPEA041 guide for the user
By investing in CHAINSAW GUIDE 140SPEA041 OO-ACCV140SPEA041, you gain not only a spare part, but above all certainty of safe and comfortable work. Key benefits include:
- Higher cutting precision - appropriately selected parameters and rigid construction of the guide translate into simpler and cleaner cuts, which is important for both fuel preparation and construction work.
- Reduced operator fatigue - lightweight cutting set on 3/8" hobby pitch and 1.3 mm groove reduces vibration and strain on the saw, making work less tiring, even during longer sessions.
- Extended life of the chainsaw - a properly selected guide reduces the load on the motor and drive mechanism, which in the long run translates into a lower risk of failure and lower service costs.
- Versatile application - From a home garden to a small farm, from preparing wood for the fireplace to building gazebos, sheds and other small wooden architecture.
FAQ - Frequently asked questions about the 140SPEA041 OO-ACCV140SPEA041 chainsaw guide
1. For which saws the 140SPEA041 OO-ACCV140SPEA041 guide bar fits?
Bar fits chainsaws designed to work with 14" long bar, 3/8" pitch hobby chain and 1.3mm groove width. Before you buy, check the chainsaw manufacturer's recommendations in the instruction manual.
2. Can I use a chain other than 3/8" hobby chain?
A chain with a pitch other than 3/8" hobby is not recommended. Using the wrong chain can lead to faster bar wear, increased vibration, and even dangerous situations such as the chain falling off the bar.
3. How to properly care for the slide to serve as long as possible?
Regularly clean the bar of sawdust and debris, make sure the chain is properly lubricated, and periodically rotate the bar (up/down) to ensure even wear. It is also important to use a properly sharpened chain with the correct tension.
4. Is 14" length sufficient for cutting thick logs?
The 14" length is optimal for typical backyard applications - cutting logs, branches and boards of moderate diameter. For very thick logs and professional tree felling, longer guides are usually used, but for most home users 14" will be fully sufficient.
5. Is the guide suitable for electric saws?
Yes, as long as the electric saw is rated for a 14" long bar, 3/8" hobby chain pitch and 1.3 mm groove width. It is essential to confirm these parameters in the technical documentation of the specific saw model.
6. How to recognize that the guide needs to be replaced?
The need for replacement may be indicated by: uneven groove wear, visible cracks, excessive bumping of the tip with the teeth, difficulty in maintaining a straight cut, or frequent chain drop. In such cases, it is recommended to install a new guide for full operational safety.
7. Is the 140SPEA041 OO-ACCV140SPEA041 guide a good choice for novice users?
Yes, it's a very good choice for those starting out with a chainsaw. Parameters of 14", 3/8" hobby and 1.3 mm provide good tool control, relatively low vibration and safety, while maintaining high cutting efficiency.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.






