GRASS AND LOPPER WITH EXTENSION ARM IGBS 1210F OB-IKRIGBS1210F
- Cordless grass and lopper with extension arm IGBS 1210F OB-IKRIGBS1210F - lightweight 2-in-1 tool with 10/20 cm blades, metal gearbox and 12-volt battery for up to 200 minutes of operation.
Grass and branch pruners with the IGBS 1210F OB-IKRIGBS1210F - a professional, cordless tool for precision garden care
Grass and lopper with extension arm IGBS 1210F OB-IKRIGBS1210F is a multifunctional 2-in-1 cordless garden tool designed for convenient, safe and fast trimming of grass, lawn edges, low shrubs and thin branches. Thanks to the long extension arm with a caster, it allows you to work in an upright position - without bending down and without putting too much strain on your back. The set includes two interchangeable blades: one for grass, the other for branches, and they can be replaced in no time and without tools.
Model IGBS 1210F is equipped with a powerful 12.0 V / 2.5 Ah battery that provides up to 200 minutes of operation on a single charge. Counter-rotating laser-cut and precision-ground blades guarantee a clean, even cut, while a metal gearbox ensures the durability and reliability of the entire mechanism. It is the ideal choice for demanding users who value convenience, precision and hassle-free operation of gardening equipment.
Grass and lopper IGBS 1210F - what it is and how it works?
Grass and lopper with extension arm IGBS 1210F OB-IKRIGBS1210F is a compact, lightweight (weighing approx. 1.0 kg) cordless tool for precision cutting of plants in the home garden. The device combines functions:
- grass trimmers - Cutting width of 10 cm, ideal for shaping lawn edges, cutting grass near walls, borders, paths or around trees;
- loppers and shrub shears - blade with a working length of 20 cm, allowing you to cut thin twigs with a maximum diameter of up to 8 mm.
The tool is powered by a 12.0 V / 2.5 Ah battery, which powers the motor that drives the counter-rotating blades. Such a solution ensures efficient, even cutting and minimizes vibration. The blades have been laser cut and ground, which affects their sharpness and durability. Thanks to the metal gearbox, the drive is transferred stably and without power loss, which significantly extends the life of the tool.
The whole is complemented by soft, ergonomic handle, providing a secure grip and comfort even during prolonged work. The special design also allows handle angle adjustment in 7 positions, which allows the tool to adapt to the user's current task and body position.
Use of grass and loppers with boom IGBS 1210F OB-IKRIGBS1210F in daily garden maintenance
Shears IGBS 1210F have been designed as a versatile tool for finishing garden maintenance work. Their wide range of applications makes them perfect for both small home plots and larger gardens, where precision and aesthetics matter.
Example applications:
- Precise lawn edge trimming - Wherever the lawnmower does not have access: at the edges, walls, pots, elements of small garden architecture.
- Formation of low shrubs and perennials - correcting the shape of small hedges, pruning lavender, boxwood, roses or other ornamental plants with thin stems.
- Pruning thin branches - Removal of young growths of fruit trees, root suckers, small dry twigs up to 8 mm in diameter.
- Care of flowerbeds and rockeries - Quickly cut grass and plants between stones or around decorations where maneuvering large equipment is difficult.
- Finishing work after mowing - corrections on hard-to-reach parts of the garden to make the whole look perfectly even.
Thanks to the use of jib with a travel roller shears can be guided comfortably even on a larger lawn area, maintaining a constant cutting height. This greatly speeds up work and reduces fatigue - especially during longer grooming sessions.
Where to mount and how to use the boom on the IGBS 1210F shears?
Model IGBS 1210F is supplied with a telescopic boom equipped with a travel roller. The boom mounts directly to the shear body in place of the hand grip. Installation is intuitive - just slide and lock the component into the dedicated slot, according to the instructions included with the device.
Such a solution allows to work in two modes:
- Manual mode - when the boom is detached, the shears serve as a compact tool for close-up work, ideal m.in. for forming shrubs or details at ponds and rockeries.
- Boom mode - when the boom is connected, you can conveniently cut grass and edges standing up, without straining your back and knees.
The travel roller located at the end of the boom allows the shears to be guided at an even distance from the ground. In practice, this means an even grass height along the entire length of the lead, which will be appreciated by users who care about a perfectly aesthetic lawn.
Examples of practical use of the boom:
- trimming along a long fence without having to constantly bend over,
- lawn care around a playground, gazebo or large flower beds,
- work on gravel paths and paving stones where you need to maintain a precise cutting line.
IGBS 1210F - convenience of use, safety and ergonomics of work
Grass and lopper shears IGBS 1210F OB-IKRIGBS1210F are designed for maximum user comfort. The small weight of the device - about 1.0 kg - makes the tool usable by both younger and older people without excessive effort.
Key features affecting convenience and safety:
- Soft, ergonomic handle - covered with soft grip material, provides a secure grip even with sweaty hands. Reduces the feeling of fatigue during prolonged work.
- Handle angle adjustment - 7 positions - allows optimal positioning of the handle in relation to the blade, which facilitates cutting both horizontally (grass) and vertically or at an oblique angle (shrubs, small hedges).
- Easy replacement of blades without tools - quick change of working mode: from cutting grass to cutting branches and vice versa. In practice, it takes only a few tens of seconds.
- 12.0 V battery power supply - no power cord eliminates the risk of cutting the cord and increases freedom of movement in the garden.
These solutions make the IGBS 1210F shears not only functional, but above all safe and comfortable, even with intensive use.
Durability and reliability - metal gearbox and precision blades in IGBS 1210F shears
Durability of gardening equipment is one of the most important parameters for demanding users. In the model IGBS 1210F solutions have been applied that make a real difference in the life and reliability of the tool.
The most important structural elements responsible for durability:
- Metal gearbox - In contrast to cheaper plastic solutions, the metal gearbox transmits loads better, is resistant to wear and tear, and ensures smooth operation of blades for a long time.
- Counter-rotating blades laser-cut and ground - high quality workmanship guarantees a precise, clean cut, which is important both for the aesthetics of the lawn and the health of the plants being pruned.
- Robust housing - resistant to typical mechanical injuries that occur when working in the garden (impacts on stones, branches, landscaping elements).
In practice, this means that the tool retains its high cutting performance even after many seasons of use, and the user can count on reproducible, professional work results.
Powerful 12.0 V / 2.5 Ah battery - up to 200 minutes of operation
One of the biggest advantages of shears IGBS 1210F OB-IKRIGBS1210F is a very efficient battery power system. The set includes a battery with parameters 12.0 V / 2.5 Ah and a dedicated charger.
Key benefits of the battery:
- Operating time up to 200 minutes - For typical maintenance work, it allows you to handle the entire garden on a single charge, without having to stop working.
- No power cord - full freedom of movement, the ability to access any corner of the garden, recreational plot or around the buildings.
- Easy assembly and disassembly - The battery can be removed in seconds to recharge or stored separately.
This makes the IGBS 1210F shears a great choice for those who want to avoid the tedious unwinding and coiling of extension cords and the worry of accidentally cutting the cable during operation.
Technical specifications of the IGBS 1210F grass trimmer and lopper with boom OB-IKRIGBS1210F
Technical parameters:
- Working width: grass 10 cm, branches 20 cm
- Cutting width/length: grass 10 cm, branches 20 cm
- Maximum diameter of cut branches: 8 mm
- Battery voltage: 12,0 V
- Battery capacity: 2.5 Ah
- Operating time: up to 200 minutes
- Type of blades: counter-rotating, laser-cut, ground
- Gearbox: metal
- Handle angle adjustment: 7 items
- Boom: with rolling castor, possibility to work in standing position
- Weight: about. 1.0 kg
- Equipment included: cordless shears, rechargeable battery, charger, boom with travel roller, set of blades for grass and branches
- Product code: OB-IKRIGBS1210F
- EAN: 4010951502207
What you get when you choose the IGBS 1210F grass and lopper?
By selecting GRASS AND LOPPER WITH EXTENSION ARM IGBS 1210F OB-IKRIGBS1210F, you are investing in a complete, modern gardening tool that will significantly facilitate your daily care of greenery. You get:
- Professional cutting quality - thanks to precision ground blades and metal gearing.
- Comfort and ergonomics - Adjustable handle, light weight, ability to work with boom.
- Flexibility of applications - easy change of blades allows you to switch from cutting grass to trimming branches in a few moments.
- Mobility - 12 V / 2.5 Ah battery provides up to 200 minutes of cable-free operation.
- Complete set - Everything you need to start working right after purchase: battery, charger, boom, grass and branch blades.
It is the ideal solution for people who want their garden to always look impeccable, and the care of greenery is convenient, fast and pleasant.
FAQ - Frequently asked questions about the IGBS 1210F grass and lopper with boom OB-IKRIGBS1210F
Question 1: Is the IGBS 1210F shear suitable for trimming thick branches?
Not. The maximum diameter of cut branches for this model is 8 mm. The tool is designed for thin twigs, young shoots and delicate shrubs. For thicker branches, secateurs or garden saws are recommended.
Question 2: How long can I run on a single battery charge?
Powerful 12.0 V / 2.5 Ah battery provides up to 200 minutes of operation depending on the load and type of work to be performed. For a typical home garden, this is usually enough time to fully care for the lawn and shrubs.
Question 3: Does blade replacement require additional tools?
Not. Blades are replaced without tools. Quick-change system allows you to easily switch from grass trimmer mode to lopper mode.
Question 4: Can I use the shears without the boom?
Yes. The shears can operate in manual mode - when the boom is detached, they become a compact, lightweight tool ideal for precise close-up work, such as shaping shrubs or pruning plants in flower beds.
Question 5: What is the handle angle adjustment for??
Handle adjustment in 7 positions allows you to adjust the position of the handle to suit the type of work being done. This makes it more convenient to trim both horizontal surfaces (lawns) and vertical and sloping surfaces (shrubs, bed edges), without excessive twisting of the wrist.
Question 6: Does the kit include a charger and battery pack?
Yes. Shears IGBS 1210F are supplied as complete set including battery, charger and boom with travel roller. After unpacking, the device is ready to use after charging the battery.
Question 7: Are scissors suitable for the elderly?
Yes. Thanks to its light weight (approx. 1.0 kg), an ergonomic handle, and an extension arm with a travel roller, the shears IGBS 1210F are also convenient for the elderly. Work is done in an upright position, which relieves pressure on the spine and knee joints.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.