OM-LINE CHAIN AND GUIDE OIL 2 L OB-ACCOLEJ2.OM
- OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM - PREMIUM class multi-grade oil for all types of chainsaws. Provides excellent lubrication, protection against wear and corrosion, and extends the life of the chain and bar.
OM-LINE CHAIN AND BAR OIL 2 L OB-ACCOLEJ2.OM - PROFESSIONAL PROTECTION OF THE CUTTING SYSTEM OF CHAINSAWS
OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM is a high-quality, multi-grade PREMIUM oil designed to lubricate the cutting systems and guides of all types of chainsaws. Thanks to a carefully selected composition of pure mineral and vegetable oils and functional additives, it provides effective protection against wear and corrosion even in difficult operating conditions - at high temperatures and in contact with water. The product does not contain waste, used or reconditioned oils, which directly translates into a longer life of the chain, bar and the entire chainsaw.
What is OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM?
OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM is a specialized lubricant developed for the intensive use of petrol and electric chainsaws. Its task is to constantly lubricate the cutting chain and guide bar so as to reduce friction, heating and accelerated wear of the working elements. Unlike universal technical oils, OM-Line's formula is tailored to the specifics of a chain moving at very high speeds through a narrow guide channel.
The preparation is based on selected mineral and vegetable oils and special anti-wear and anti-corrosion additives. As a result, it is distinguished by its excellent adhesion to metal, its stable viscosity over a wide temperature range and its ability to form a long-lasting oil film that does not run off the chain as soon as the saw is started. The use of only "pure" oil bases without the addition of waste and regenerated oils guarantees reproducible quality, high operating culture and better protection of the machine in the long term.
This oil is described as multi-seasonal - this means that it retains its lubricating properties both at low temperatures (e.g. during winter work in the forest) and on hot days, when the working parts of the chainsaw heat up a lot. The versatility makes one product enough for a whole year of operation, without the need to change oil depending on the season.
Where OM-Line chain and bar oil 2 L OB-ACCOLEJ2 is used.OM?
OM-Line oil 2 L OB-ACCOLEJ2.OM is used in the lubrication systems of chainsaws - both petrol, electric and battery-powered - equipped with automatic or manual chain oil feeding system. It is poured into a special oil tank in the saw, from where it is then metered onto the guide bar and chain as the machine runs. The product is compatible with most brands of chainsaws on the market, such as models for forestry, gardening, orchard or construction work.
The oil can be used successfully:
- In professional chainsaws used for felling and limbing trees in the forest.
- In garden saws for cutting firewood, trimming branches or cleaning up around the house.
- In workshop saws used in sawmills, carpentry plants and construction companies.
For maximum efficiency, it is recommended to regularly top up the oil level and use only chain oil, not substitutes that are not designed for this type of equipment. This will ensure that the chain is properly lubricated from the first seconds of operation and minimize the risk of overheating and seizure.
Use of OM-Line 2 L chain and bar oil in daily operations
PREMIUM OM-Line 2 L multi-grade oil has been developed for a wide range of applications - from occasional household work to intensive professional use. Its formula works well for both longer cutting cycles of thick trunks and for short, frequent jobs such as pruning branches, formatting wood or preparing firewood for winter.
Examples of practical applications:
- Forestry work: logging, limbing, thinning thick logs where the chain works under heavy load and generates high temperatures.
- Garden work: firewood cutting, removal of dry branches, care of trees and shrubs in orchards and home gardens.
- Timber industry: in sawmills and carpentry plants, where saws operate for many hours every day and stable lubrication without excessive oil consumption is of crucial economic importance.
The oil, thanks to its versatility, makes it possible to reduce the number of products needed to service the machinery fleet - both in a small company and in a large enterprise. In addition, the 2-liter capacity is a compromise between storage convenience and performance - the canister lasts for many work cycles, while being handy for transport in the car or tool box.
Key features of OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM
OM-Line chain and bar oil 2 L OB-ACCOLEJ2.The OM is distinguished by a set of features that are particularly important from the point of view of the chainsaw user - both professional and demanding amateur:
- PREMIUM multi-season formula - stable lubricating properties at low and high temperatures allow year-round use without the need for "winter" or "summer" oil changes.
- Protection against wear and corrosion - anti-wear and anti-corrosion additives significantly extend the life of the chain and bar, reducing equipment operating costs.
- Pure mineral and vegetable oils - lack of waste, used and regenerated oils means higher quality and less risk of formation of carbon deposits or sludge in the lubrication system.
- Good adhesion to the chain - the oil forms a durable film that is not immediately "shed" from the chain, making oil consumption more economical and lubrication more effective.
- Resistance to water and elevated temperatures - even when working in the rain, humid environment or when the bar is strongly heated, the oil retains its protective properties.
- Capacious and convenient 2 l packaging - The ergonomic canister with handle makes it easy to pour and store, and the 2-liter quantity is optimal for individual and small business users.
Thanks to the above features, OM-Line 2 L oil will work well in the hands of both a professional chainsaw operator making dozens of cuts a day and a home user who prepares firewood a few times a month. In either scenario, it's crucial that the cutting chain runs smoothly, doesn't overheat, and doesn't dull too quickly - and that's what a properly selected oil provides.
OM-Line chain and bar oil 2 L - quality, durability and reliability in practice
Choosing OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM, you are investing in the long-term protection of your equipment. Proper lubrication is not only about comfort - less noise, less vibration, smoother cutting - but, above all, real savings from less frequent chain and bar replacement and lower risk of serious chainsaw breakdowns.
Regular use of high quality oil:
- Reduces wear and tear on chain links and cutting teeth, allowing you to maintain high cutting performance longer.
- Protects the bar groove from excessive abrasion, which prevents the chain from "smashing" and increases operating safety.
- Reduces the risk of seizure of moving parts, especially under conditions of intense load and increased heating.
In practice, this means that a saw lubricated with OM-Line oil runs lighter, more efficiently and longer without the need for costly repairs. For the service company, this translates into lower operating costs and greater fleet reliability, and for the individual user - the confidence that the saw will work smoothly when needed.
Manufacturer's description available - OM-Line chain and bar oil 2 l
OM-line chain and guide oil 2 l
PREMIUM multi-grade oil for lubrication of cutting systems and guides of all types of chainsaws used in logging and gardening work. The composition of additives contained in the oil provides protection against wear and corrosion, increasing the life of the cutting system even at elevated temperatures and water ingress. It is composed of pure mineral and vegetable oils with functional additives without the participation of waste oils , used and regenerated oils. 2l package.
Technical specifications of OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM
- Purpose: lubrication of cutting chains and chainsaw guides.
- Product type: pREMIUM class lubricating oil.
- Characteristics: multi-season oil, resistant to elevated temperatures and water action.
- Oil base: pure mineral and vegetable oils with functional additives.
- Security of composition: no waste, used and regenerated oils.
- Package Capacity: 2 liters.
- Application: all types of chainsaws used in logging, gardening and household work.
- Product code: OB-ACCOLEJ2.OM.
- EAN code: 5903383018998.
FAQ - Frequently asked questions about OM-Line chain and bar oil 2 L OB-ACCOLEJ2.OM
Is OM-Line 2 L oil suitable for all brands of chainsaws?
Yes, OM-Line 2 L oil is a universal product and can be used in most chainsaws on the market - both petrol, electric and cordless, unless the manufacturer of the device recommends only oil with specific parameters. It is usually fully compatible with popular chainsaw models used in the forest, garden and workshop.
Can OM-Line oil be mixed with other chain oils?
Technically, small admixtures of other oils should not hurt, but for full protective properties and predictable operation of the lubrication system, it is recommended to use one selected type of oil. Mixing different products can reduce the effectiveness of additives and change the viscosity of the mixture.
How often should you top up the oil in your chainsaw?
On most chainsaws, the chain oil tank empties at about the same rate as the fuel tank. A practical rule of thumb is to check the oil level every time you refuel your chainsaw and refill it to the recommended level. Lack of oil or insufficient oil level risks rapid overheating and seizing of the chain and bar.
Can OM-Line 2 L oil be used in winter?
Yes, it is a multi-grade oil, designed to operate over a wide temperature range. It retains the right viscosity even in conditions of reduced ambient temperature, which makes it possible to reliably lubricate the chain for winter work in the forest or for cutting wood in cold weather.
How to store OM-Line chain and bar oil 2 L?
Store the oil in the original sealed packaging, in a dry and shaded place, away from heat sources and direct sunlight. Avoid contaminating the inside of the canister - that's why it's a good idea to pour oil into the chainsaw with a clean funnel or directly from the convenient profiled outlet of the container.
Does OM-Line 2 L oil affect operational safety?
Yes. A well-lubricated chain runs smoother, heats up less and does not jam in the bar, reducing the risk of sudden jerks or jams when cutting. Stable lubrication helps maintain control of the saw, thereby increasing user safety. Of course, this does not replace the need for proper protective clothing and compliance with health and safety rules, but it is an important part of the safe operation of equipment.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.