AIR FILTER FOR MH 155 L66151960
- Air filter for Oleo-Mac MH 155 L66151960 soil planter - original filter cartridge for effective protection of the engine from dust and sand, stable power, easy starting and longer life of the machine in harsh garden conditions.
Air filter for MH 155 L66151960 is a high-quality consumable item designed for Oleo-Mac MH 155 soilers and Efco and Nibbi twin machines. It is responsible for effectively cleaning the air sucked into the engine from dust, sand and other contaminants, so that the drive unit runs stably, with full power and preserved service life. It is an original design developed specifically for heavy, dusty garden and agricultural conditions where standard filters quickly become clogged.
What is the air filter for the MH 155 L66151960 and why is it so important?
Air filter for MH 155 L66151960 is a component of the intake system of the internal combustion engine of the soil harvester. It is constructed of high-quality pleated filter media embedded in a durable plastic frame. Such a design provides a large filtration area with compact dimensions, and thus high efficiency in capturing contaminants while maintaining free air flow.
During the operation of the soil tiller, when the blades stir the soil, dust and soil particles fly intensely in the air. Without a functioning filter, fine dust would go directly into the cylinder, causing scratches, accelerated wear of piston rings, loss of compression and loss of power. The use of a dedicated air filter for MH 155 L66151960 avoids these problems, guaranteeing long-term and trouble-free operation of the engine.
This product is designed as a service part - its regular replacement is part of the basic maintenance of the soil tiller. Thanks to the appropriately selected permeability of the filter material, the engine does not "choke", maintains stable revolutions and low fuel consumption even during long-term operation in hard and dry soil.
Where does the air filter for the MH 155 L66151960 fit and what machines it fits on??
The air filter for the MH 155 L66151960 is mounted in the air filter housing located on the side or on top of the engine of the soil harvester, depending on the specific design version. Access to it is easy - usually it is enough to unscrew a few screws or swing back the latches of the housing cover, remove the used cartridge and insert the new filter, paying attention to the correct position of the seal in the frame.
This filter is designed primarily for the Oleo-Mac MH 155 K soil planter and its counterparts sold under the Efco and Nibbi brands. It is in these models that the filters work under extremely harsh conditions: the devices are used for loosening soil in home gardens, orchards, plastic tunnels and on recreational plots, where floating dust is particularly intense.
Examples of places of application of the soil conditioner, and thus the air filter MH 155 L66151960:
- Growing a home vegetable garden - Frequent work in dry, dusty soils;
- Soil preparation in foil tunnels and greenhouses - limited ventilation promotes dust concentration, so the filter must work extremely effectively;
- Loosening flower beds and flower beds - A large amount of organic debris and dust requires reliable filtration.
In each of these applications, the right air filter is crucial to maintaining optimal engine power and getting the job done quickly.
Air filter for MH 155 Oleo-Mac L66151960 - application, benefits and daily use
Air filter for MH 155 Oleo-Mac L66151960 is designed for intensive, seasonal use of garden machinery. It is perfect for both private users and small gardening companies that regularly prepare soil at customers' sites.
The most important benefits of using this filter in daily work:
- Effective engine protection - the dense structure of the paper filter medium retains dust, sand and organic residues, reducing the risk of scratching the cylinder and premature wear of piston and crank components.
- Stable power and easy start-up - clean air enables proper formation of the fuel-air mixture, which translates into reliable starting and even engine operation even in demanding conditions.
- Fuel savings - proper air flow helps reduce combustion and smoke, making the operation of the soil tiller more economical and environmentally friendly.
Examples of daily use of the MH 155 L66151960 filter:
- Changing the filter before the start of spring cultivation work to prepare the garden for sowing vegetables;
- Checking the condition of the filter after several days of intensive work on loosening compacted, dried soil - if heavily soiled, immediate replacement is recommended;
- Regular replacement in a small gardening company after the end of the season - preparing the machine for another year of work.
Durability, quality and reliability - the most important features of the Oleo-Mac MH 155 L66151960 air filter
Oleo-Mac MH 155 air filter L66151960 is designed according to the strict requirements of the manufacturer of garden equipment. As a result, the user receives a product that is distinguished by durability, precision manufacturing and repeatable filtration parameters.
Key features from the customer's point of view:
- High quality filter material - specially selected pleated filter paper provides a large active surface, which translates into a long filter life and effective retention of even fine dust particles.
- Sturdy plastic frame - The sturdy perimeter maintains the shape of the filter, ensuring a tight fit in the housing slot and no "blowing" of unfiltered air.
- Easy installation and replacement - the filter has exactly the right dimensions, so its installation is quick and does not require specialized tools. This saves time for both the individual user and the service provider.
In practice, this means that during, for example, an all-day scarification of a garden of several hundred square meters, the engine maintains even operation, and the filter does not quickly become clogged. The owner of the machine can calmly concentrate on work instead of worrying about the condition of the drive unit.
How to take care of the MH 155 L66151960 air filter so that the soil tiller works long and trouble-free?
Proper operation of the air filter is critical to the life of the engine. Even the best filter, if used for too long, will cease to serve its purpose, causing a decrease in power and an increase in fuel consumption.
Practical tips for the user:
- Regular inspection - before the start of the season and after a few intense days of operation, it is a good idea to remove the housing cover and assess the degree of dirtiness of the filter.
- Replacement according to the manufacturer's recommendations - in conditions of heavy dust, it is worth changing the filter more often than the minimum recommendations. The cost of the filter is disproportionately low compared to the eventual repair of the engine.
- Avoiding washing in water - paper filter is not washable. Attempts to wash it may damage the structure of the filter medium and reduce filtration efficiency.
By following the above rules, the MH 155 tiller retains its power for a long time, and you can be sure that the engine is properly protected.
The most important advantages of the air filter for MH 155 L66151960 at a glance
- Dedicated to Oleo-Mac MH 155 soilers (and Efco and Nibbi equivalents);
- Effective protection of the engine from solid contaminants;
- Increased filtration area due to pleated medium;
- Stable engine operation and easy starting even after a long stop;
- Simple installation - replacement possible by yourself in a few minutes;
- Durable, warp-resistant plastic frame;
- High cost-effectiveness - low cost relative to the protection of an expensive drive unit.
FAQ - Frequently asked questions about air filter for MH 155 L66151960
How often should you change the air filter on the MH 155 soil planter??
Frequency of replacement depends on the intensity and conditions of operation. For typical amateur garden use, at least one replacement per season is recommended. In very dusty conditions (dry, sandy soil, long working cycles), it is worth inspecting the filter after a few days and replacing it earlier if it is visibly dirty.
Can the MH 155 L66151960 filter be cleaned with compressed air?
Gentle blowing from the outside to the inside can temporarily improve the flow, but it is considered only an ad hoc solution. For safety reasons for the engine, it is recommended to change the filter regularly and fully, rather than repeatedly blowing it out.
Is it complicated to install the filter yourself?
Not. In most cases, it is enough to unscrew or unfasten the cover of the air filter housing, remove the old cartridge, clean the inside of the housing of loose debris and insert the new filter, paying attention to the proper alignment of the. The whole operation takes a few minutes and does not require specialized tools.
Does the use of a non-original filter make a difference?
An ill-fitting filter or one made of inferior materials can allow more contaminants to pass through or restrict airflow, negatively affecting engine life and power. Choosing a filter designed specifically for the MH 155, such as the L66151960, ensures proper protection and performance.
How to recognize that the air filter needs immediate replacement?
Replacement of the filter is evidenced by: pronounced dirtiness of the paper surface (dark stains, dust, soil), visible decrease in engine power, "throttling" of the unit under load and increased fuel consumption. In such situations, it is not worth delaying - a quick replacement of the filter is the easiest way to restore full efficiency of the machine.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.