WEIGHT FOR OLEO-MAC/NIBBI MH450/KAM13S 69209125PL
- Professional weight for Oleo-Mac/Nibbi MH450/KAM13S 69209125PL - ok. 70 kg of dedicated counterweight for MWX separation soil planter. Ensures perfect balance, better wheel grip, greater safety and comfort on heavy soils. Ideal
BALANCER FOR OLEO-MAC/NIBBI MH450/KAM13S 69209125PL - professional counterweight for MWX separation soil planter
LOAD FOR OLEO-MAC/NIBBI MH450/KAM13S 69209125PL is a massive, approximately 70-kilogram counterweight mounted on the front of the drive unit that works with the MWX separation tiller. Its main task is to add weight to the front of the single-axle tractor so as to balance the weight of the tiller and ensure safe, stable and maximally efficient operation in all conditions - from light garden soils to heavy clay soils in commercial areas.
What is the weight for Oleo-Mac/Nibbi MH450/KAM13S 69209125PL?
Weight for Oleo-Mac/Nibbi MH450/KAM13S 69209125PL is a specially designed add-on component (accessory) designed for professional single-axle tractors and drive units that work with the MWX separating tiller. Made of high-quality materials, it is a concentrated mass mounted on the front of the machine, which compensates for the significant weight of the working unit located at the rear (separation tiller). As a result, the operator gains excellent balance of the entire set, less strain on the hands and more confident guidance of the machine over varied terrain.
The loader is especially recommended for intensive use in farms, service companies, horticultural companies and professional maintenance of green areas. It's an accessory that significantly improves working comfort and extends the life of key machine components by reducing excessive stress on the running gear and transmission system.
Where does the weight for Oleo-Mac/Nibbi MH450/KAM13S 69209125PL mount??
The Oleo-Mac/Nibbi MH450/KAM13S 69209125PL weight is mounted on a specially prepared plate or frame at the front of the drive unit, just in front of the engine and drive wheels. The design provides for stable hitch points that make installation fast, safe and repeatable, and the weight itself remains securely seated even when working in very demanding field conditions.
This method of installation has several important advantages:
- Perfect balance of the machine - The weight of the loader acts on the front axle, balancing the weight of the rear-mounted MWX separating cultivator.
- Improved traction of the drive wheels - Front downforce increases traction, allowing the single-axle tractor to move more confidently on slopes, uneven ground and moist soil.
- Enhanced operator safety - Reduced risk of lifting the front of the machine when plunging the soil tiller into hard ground, reducing the possibility of losing control of the unit.
In practice, this means that once the weight is properly installed, the operator feels noticeably less drag on the handles, and the handling of the machine becomes smoother and more predictable, even in deep cultivation or working on sloping terrain.
Application of the weight to the drive unit with the MWX separation tiller
The weight for Oleo-Mac/Nibbi MH450/KAM13S 69209125PL is especially recommended for the drive unit's operation with the MWX separating cultivator. Due to the weight of the tractor and tiller, the weight gives adequate counterbalance allowing optimal operation. It works well wherever high stability of the working set and uniform maintenance of the set cultivation depth is required.
Typical application examples:
- Soil preparation for lawns and recreational areas - The weight stabilizes the machine during deep loosening and separation of stones, clods and dirt by the MWX tiller.
- Soil cultivation on farms - especially on heavy, compacted and rocky soils, where without proper weighting the front of the machine could float.
- Professional gardening and municipal services - Long, multi-hour work cycles require the equipment to be as stable as possible; the weight reduces operator fatigue and improves the quality of the service performed.
With the use of the weights, you gain a more even soil structure, precise maintenance of the working depth, and a stable trajectory of the machine, which directly translates into the quality of the prepared ground and fewer corrections.
Weights for Oleo-Mac/Nibbi MH450/KAM13S - quality, durability and reliability for professionals
Oleo-Mac/Nibbi MH450/KAM13S loader 69209125PL is designed for intensive, multi-year use. Robust, solid construction and careful anti-corrosion protection allow it to be used in open spaces, in humid environments and in changing weather conditions without fear of losing its performance.
Benefits from the user's point of view:
- High durability - No fragile parts or parts susceptible to mechanical damage; design optimized for impact loads and vibrations occurring during the operation of the tiller.
- Reliability in difficult conditions - The weight maintains its properties regardless of the type of soil, and its weight remains a stable reference for the entire machine.
- Maintenance-free - requires no additional maintenance other than possible cleaning from mud or plant debris after work is completed.
For service companies and professional users, this means lower operating costs, less service downtime, and the confidence that equipment will be ready to go whenever it is needed.
Technical specifications of the Oleo-Mac/Nibbi MH450/KAM13S 69209125PL weights
The following is a summary of the most important technical information about the weight and the related work unit:
Weights
- Purpose: oleo-Mac/Nibbi MH450/KAM13S drive unit working in conjunction with the MWX separation tiller
- Recommended use: working with the MWX separation soil tiller, especially on heavy soils and in deep cultivation
- Total weight: approximately 70 kg - providing optimum weight and counterweight for the work unit
Selected parameters of the related work unit*
*These parameters apply to the working set with which the weight is particularly recommended to work:
| Body | PP |
| Engine power | 1800 W |
| Working width | 38 cm |
| Wheels | 20 and 15 cm |
| Garbage can | 45 l |
| Cutting depth adjustment | central, 5 positions, from -12 to 6 mm |
| Working elements | 16 steel blades and 20 spring blades |
The loader, working together with a unit with the above parameters, allows you to take full advantage of the machine's potential - from the working width, to the depth adjustment capabilities, to the precision of working elements.
The benefits of using the Oleo-Mac/Nibbi MH450/KAM13S 69209125PL weights in your daily work
When you invest in a dedicated weight for the Oleo-Mac/Nibbi MH450/KAM13S 69209125PL, you not only gain an additional piece of equipment, but more importantly, you gain real benefits that are felt every hour you work in the field. It's an accessory that quickly translates into productivity and safety.
- Better crop quality - Uniform penetration of tools into the soil, stable pressure and less "bouncing" of the machine, which visibly improves the structure of the processed layer.
- Less operator fatigue - better balance of the set means that less force is required to maintain the track and direction of work, which is of great importance during long, multi-hour jobs.
- Working more safely in difficult terrain - weight reduces the risk of uncontrolled lifting of the front, "pulling" the machine sideways, and loss of grip on wet, sloping or rocky pavement.
In everyday practice, this means fewer revisions, shorter turnaround times, and greater satisfaction for customers, for whom what matters is not only the speed of execution, but above all the perfect end result.
FAQ - Frequently asked questions about Oleo-Mac/Nibbi MH450/KAM13S loader 69209125PL
1. To which machines the Oleo-Mac/Nibbi MH450/KAM13S 69209125PL weight fits?
The loader was designed primarily for the Oleo-Mac/Nibbi MH450/KAM13S drive unit that works with the MWX separating cultivator. Thanks to the dedicated mounting points, it fits perfectly into the design of the machine, ensuring that the entire set is properly balanced.
2. Can I do the weight assembly myself?
Yes, the installation of the weight is relatively simple, however, due to the weight of approx. 70 kg it is recommended to perform it by two people or with the use of appropriate supports. The weight is installed on the factory-prepared mounting points at the front of the drive unit.
3. Does the weight need to be disassembled after the job is done?
It is not necessary - the weight can remain mounted on the machine. In practice, many users leave it on permanently, especially if they often work with the MWX separation soil tiller. However, disassembly may be advisable if the machine will be moved or transported over longer distances.
4. In which the weight improves work safety?
Extra weight on the front prevents the machine from floating, improves the traction of the drive wheels and stabilizes the set when plunging tools into hard soil. As a result, the operator has better control over the direction of travel, and the risk of sudden, uncontrolled movements of the machine is significantly reduced.
5. Whether the weight requires special maintenance?
The weight is a virtually maintenance-free component. When you're done, it's a good idea to remove dirt from it, such as mud or plant residue, and for long-term storage, make sure the storage area is dry. Regular cleaning keeps the protective coating in good condition for many seasons.
6. Will the weight increase the productivity of the MWX separation soil planter?
Yes, better balance of the machine translates into more stable operation of the working tools and the ability to maintain the set depth of cultivation over the entire area. This means faster execution of the work, fewer necessary corrective trips, and a more homogeneous soil structure, ready for lawn seeding or other plantings.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.