METAL WHEELS FOR NIBBI 118/118D 69209122
- Metal wheels for Nibbi 118/118D soil planter 69209122 - professional set of working wheels made of steel. Guarantee maximum traction, stability on inclines and better use of engine power in heavy soils. Ideal for plowing, cultivating and sowing
Metal wheels designed for use with the Nibbi 118 and 118D soil tiller
METAL WHEELS FOR NIBBI 118/118D 69209122 is a rugged, specialized work accessory designed for Nibbi 118 and 118D series soilers. Made of durable, thick-walled steel, the wheels replace standard rubber wheels wherever extremely strong grip and wear resistance are required. Thanks to their aggressive tread and properly sized, they significantly improve the traction of the machine, making it easier to work in the toughest soil conditions.
What are the METAL Wheels for NIBBI 118/118D 69209122 and why you should have them?
METAL WHEELS FOR NIBBI 118/118D 69209122 is a set of two metal working wheels designed specifically for use with Nibbi 118 and Nibbi 118D soilers. They replace the rubberized transport wheels, turning the soil tiller into an extremely effective tool for cultivation, filling and working on inclines. The design of the wheels is based on a welded steel ring with welded blades (teeth) that bite into the soil and prevent slippage, even when the ground is heavy, clayey or wet.
In practice, this means that the operator gains full control of the machine, can work deeper, slower and more precisely, without wasting energy on wheel slippage. It's an accessory especially appreciated by gardeners, farmers and professional users who expect a soil tiller to deliver performance comparable to a small single-axle tractor.
Where Nibbi 118/118D metal wheels are mounted and what the installation looks like?
METAL WHEELS FOR NIBBI 118/118D 69209122 mounts directly on the axle of the tiller in place of standard transport wheels. A matching hub mount with mounting holes allows wheels to be quickly attached to Nibbi 118 and Nibbi 118D factory mounts. Such a method of installation means that the replacement from rubber wheels to metal wheels takes only a few minutes and does not require specialized tools - basic wrenches, which the user usually has in his workshop, are enough.
With the installation of metal wheels, the center of gravity of the tiller is favorably lowered, which increases the stability of the machine when working in ridges, on inclines or in deep soil cultivation. Wheels can be used on their own or in combination with other accessories - for example, a plow, a seed drill or a cultivator - attached to the back of the soil tiller.
Example of assembly application:
- Replacement of rubber wheels with metal wheels before spring deep tillage of frozen or compacted soil.
- Installation of metal wheels for working with a single-plow when plowing in a small orchard.
- Putting wheels in place before sprinkling potatoes with an adjustable seed drill on a slight incline.
METAL WHEELS FOR NIBBI 118/118D Soil Compactor - key advantages and benefits for the user
Metal wheels for Nibbi 118/118D are designed to maximize field and garden work. Their use brings a number of benefits that you will feel the first time you drive the soil tiller:
- Exceptional grip - aggressive steel blades bite into the soil and prevent slippage. As a result, the machine does not "dance" on the surface, but confidently moves forward, evenly driving the working knives.
- Better use of engine power - No slippage means that full engine power is transferred to work the soil, rather than the wheels slipping. This translates into shorter working hours and lower fuel consumption.
- Stability on inclines - metal wheels improve traction on slopes and in ridges where rubber wheels tend to sink or slip. With them you can work more safely on hilly plots and slopes.
The wheels will work well both in small home gardens and on larger acreage on farms, where repeatable results and reliability of equipment during the season are important.
Durable, reinforced steel construction - reliability for many seasons
METAL WHEELS FOR NIBBI 118/118D 69209122 are made of high quality steel, resistant to deformation and mechanical damage. The welded design of the ring and blades ensures adequate rigidity while reducing the risk of breakage when working in rocky soil or on heterogeneous ground.
The surface of the wheels is covered with a durable lacquer coating that protects the steel from corrosion and makes it easy to clean after use. Mud, clay or plant debris can be quickly removed with a jet of water, keeping the wheels in very good working condition for many seasons.
Examples of situations in which you will appreciate the durability of wheels:
- Cultivation of heavy, clay soils where traditional tires wear out or deteriorate quickly.
- Working in fields with rocks, roots and other obstacles that can damage the tire.
- Intense, daily use of the soil tiller during the season - in a small vegetable farm or plant nursery.
Use of Nibbi 118/118D metal wheels in daily operations
METAL WHEELS FOR NIBBI 118/118D 69209122 significantly expand the capabilities of your tiller. Once they are installed, the machine becomes a versatile tool for a range of field and garden work:
- Deep soil cultivation - The wheels allow the blades to maintain a stable depth in difficult conditions, such as after a prolonged drought or on long-untilled soil.
- Ploughing and ploughing - In combination with the plow, the metal wheels provide the necessary traction to turn the furrow and mix the crop residue.
- Covering and forming ridges - stable guidance of the soil tiller allows precise ridging of potatoes, carrots, leeks or strawberries.
- Working on inclines - improved traction allows safer operation on slopes, embankments and drainage ditches.
As a result, one set of metal wheels can handle a wide range of tasks: from spring soil preparation, to summer maintenance work, to autumn cleanup and green manure plowing.
Compatibility, convenience of use and economy of purchase
METAL WHEELS FOR NIBBI 118/118D 69209122 are dedicated to specific models of Nibbi soilers - 118 and 118D series. This ensures that you have a proper fit and a stable, secure attachment. You don't have to worry about making adapters or modifications that could weaken the design of the wheels or affect operational safety.
Investing in metal wheels also means real savings:
- you limit the wear and tear on your tire wheels, which you can keep for purely transportation tasks,
- reducing work time due to better traction, you use less fuel,
- you increase the life of the engine and gearboxes, which are not overloaded by constant slipping and jerking.
This solution is particularly attractive for professional users who perform contract cultivation services - the reliability of the machine directly translates into customer satisfaction and timely completion of work.
Technical data (if applicable to Nibbi 118/118D model)
The following parameters are indicative and may vary depending on the production batch. It's always a good idea to compare them with the documentation of the manufacturer of the soil conditioner before you buy it.
- Purpose: Nibbi 118 / Nibbi 118D soil planter
- Product type: set of metal working wheels
- Material: welded structural steel
- Finish: corrosion protection paint coating (black color)
- Tread profile: steel blades / teeth with high grip
- Product code / external system code: 69209122
FAQ - Frequently Asked Questions about METAL WHEELS FOR NIBBI 118/118D 69209122
Do the metal wheels fit other models of soilers than the Nibbi 118 and 118D?
The wheels were designed specifically for the Nibbi 118 and 118D models, so full compatibility and safety of operation is guaranteed by their installation on these very machines. Use on other models is possible only after prior professional verification of the compatibility of mounts and axles.
Does the installation of metal wheels require a service visit?
In most cases, you can do the installation yourself, using basic tools. The wheels are put on the axle in place of standard wheels and secured with the appropriate fasteners. If you don't feel confident, however, it's worth getting help from an authorized service center.
Can metal wheels be driven on paving stones or asphalt?
Metal wheels are mainly designed for soil work. Driving on hard surfaces such as pavement or asphalt can cause them to wear out faster and damage the substrate. For typical transportation on paved roads, it is better to use rubber wheels.
How to take care of metal wheels after work is done?
After each use of metal wheels, it is recommended to remove soil and plant debris from them and then rinse with water. After drying, it is worth checking the condition of the paint coating - any scratches can be locally protected with anti-corrosion paint. Store wheels in a dry place, protecting them from prolonged contact with moisture.
Are metal wheels heavier than rubber wheels, and does this affect the handling of the soil compactor?
Yes, metal wheels are usually heavier than rubber wheels, but their weight works to the advantage of the operator - it increases ground pressure and improves traction. The soil tiller drives more steadily and requires less force to maintain direction due to better traction.
Are metal wheels suitable for working in very wet soil?
Yes, it is in wet, slippery conditions that metal wheels with aggressive blades show their advantage over rubber wheels. However, be careful - working too deep in soggy soil can lead to over-compaction of the soil.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.