ADJUSTABLE NOZZLE 68500068
- Original adjustable nozzle 68500068 for Oleo-Mac PW125C washer. Infinitely adjustable spray pattern - from a gentle fan to a powerful spot spray. Ideal for car, patio, pavement and garden.
REGULATED AIRWASHER 68500068 for Oleo-Mac PW125C pressure washer - maximum cleaning efficiency at your fingertips
ADJUSTABLE NOZZLE 68500068 is an original, adjustable (rotating) working tip for Oleo-Mac high-pressure washers, which is a standard equipment of the washer PW125C. Allows you to precisely adjust the water jet to the type of surface to be cleaned - from a gentle rinse to a highly concentrated jet for special tasks. It is perfect for both domestic applications and more demanding work around the house, in the garden or a small workshop.
Adjustable/rotating nozzle. It comes standard with the PW125C washer;
Fits the following Oleo-Mac washers: PW125C;
Review photo
Oleo-Mac adjustable nozzle 68500068 - what it is and why you should have it?
Adjustable nozzle 68500068 is a specialized tip mounted on the lance of a pressure washer. Its task is to form and control the high-pressure water jet so as to achieve the highest possible cleaning efficiency with the lowest possible consumption of time and water. With the built-in adjustment system, the user can smoothly change the shape and width of the jet by simply rotating the nozzle head.
The body of the nozzle is made of high-quality technical plastic resistant to the working pressure and accidental impacts that may occur during operation. Its compact size makes it easy to maneuver the lance even in tight and hard-to-reach spaces, such as rim corners, spaces between fence elements or sections of the facade behind drain pipes.
Thanks to the precise internal design and properly profiled flow channels, the nozzle provides a stable, even water stream. This allows you to achieve professional cleaning results even with a standard household washer - dirt from paving stones, mud from car bodies or dried deposits from garden tools are removed faster and more thoroughly.
Mounting the adjustable nozzle 68500068 on the PW125C washer - fast, secure and without tools
Nozzle 68500068 was designed specifically for the washer Oleo-Mac PW125C. It is equipped with a quick coupling adapted to the mounting system used in this series of devices. Installation is done without tools - just slide the nozzle into the socket at the end of the lance, press down to snap into place and make sure the connector is firmly seated.
This design minimizes the risk of leaks and accidental release during full-pressure operation. The intuitive attachment system is particularly convenient for users who frequently change accessories - for example, switching between adjustable and rotary nozzles or foamers.
Examples of applications of correct assembly:
- Daily car wash - a quick plug in the nozzle before the weekend exterior cleaning.
- Tidying up the garden - changing the accessory from a rotary nozzle to an adjustable one when rinsing garden furniture.
- Washing of facades or external blinds - secure attachment guarantees stable stream and safety of work at height.
Use of Oleo-Mac adjustable nozzle 68500068 - one accessory, many tasks
The adjustable nozzle 68500068 is ideal wherever flexibility and the ability to quickly adjust the strength of the jet to the type of dirt and the sensitivity of the surface is important. Its rotating mechanism allows you to smoothly switch from a wide fan to a narrow, more aggressive spot stream.
This solution is particularly useful for users who use the pressure washer for a wide variety of work:
- Vehicle washing - Cars, motorcycles, bicycles; wide, softer spray for paint, stronger for wheel arches and rims.
- Tidying up the driveway and terrace - Removal of mud, moss and deposits from paving stones, patio slabs and concrete stairs.
- Fence and facade cleaning - adjusting the jet to more delicate surfaces, such as wood, plaster or plastic cladding.
- Washing of tools and machines - Quickly remove grease and soil from lawnmowers, tillers, wheelbarrows or other gardening equipment.
- Work around the house - Rinsing after renovations, washing waste containers, landscaping elements or garden toys.
With such a wide application, one nozzle is able to replace several separate tips, simplifying equipment and reducing the cost of operating the washer.
Quality, durability and reliability - original adjustable nozzle 68500068 for Oleo-Mac PW125C
By choosing original Oleo-Mac nozzle 68500068, you get an accessory designed and tested specifically for use with the washer PW125C. This is a guarantee of full compatibility, proper water flow and safe operation at the pressure recommended by the manufacturer.
The body plastic was selected to be resistant to:
- continuous operation of high water pressure,
- temperature changes and standard cleaners used with washers,
- accidental bumps and falls during field work.
Thanks to this, the nozzle retains its properties for a long time, which translates into real savings - there is no need for frequent replacement of accessories, and the washer retains full cleaning efficiency. Stable operation and repeatable stream also minimize the risk of damage to delicate surfaces resulting from the unpredictable operation of cheap, non-original replacements.
Parameters and compatibility of adjustable nozzle 68500068
The most important technical and operational information relevant to the user is summarized below:
- Product type: adjustable / rotary nozzle for high-pressure cleaner.
- Purpose: standard equipment of Oleo-Mac washer PW125C.
- Compatibility: oleo-Mac high-pressure washers - model PW125C.
- Product/Part Code: 68500068.
- EAN code: 8026619065577.
- Type of stream: infinitely adjustable - from a wide fan to a more concentrated stream.
- Adjustment method: rotation (rotation) of the nozzle head.
- Assembly: quick release fitting for PW125C washer lance - tool-free installation.
- Body material: durable technical material resistant to working pressure.
- Application: cleaning work around the house, in the garden, on vehicles and light workshop applications.
Such parameters make the nozzle 68500068 a practical and indispensable piece of equipment for every user of Oleo-Mac PW125C washer. Simplifies daily work, increases cleaning efficiency and allows you to get the most out of your device.
FAQ - frequently asked questions about adjustable nozzle 68500068
Question 1: For which washer does the adjustable nozzle fit 68500068?
Adjustable nozzle 68500068 is designed for high-pressure washer Oleo-Mac PW125C and is its standard equipment. Thanks to the specially adapted quick-release coupling, it provides full compatibility with this model.
Question 2: How to adjust the water flow in this nozzle?
You adjust the water flow by rotating the nozzle head. By turning it to one side, you get a wider and softer fan stream, and to the other, a narrower and more concentrated stream, ideal for removing tough dirt.
Question 3: Are additional tools needed to install the nozzle?
Not. The 68500068 nozzle has a quick-connect coupling, which enables quick assembly and disassembly without tools. Simply slide it into the appropriate slot on the lance and press down until it snaps into place.
Question 4: For which jobs is it best to use this nozzle?
Adjustable nozzle is very versatile. It will be great for car washing,cleaning of cobblestones,terraces, fences, facades, as well as when rinsing gardening tools and machinery. Adjustable jet allows you to match it to both delicate and more demanding surfaces.
Question 5: Is the nozzle resistant to chemicals?
The nozzle was made of technical plastic adapted to work with typical cleaning agents used in high-pressure cleaners. However, it is recommended to use preparations recommended by the manufacturer of the washer and always following their dosages and label recommendations.
Question 6: Is this an original Oleo-Mac part?
Yes, the nozzle 68500068 is an original Oleo-Mac accessory, designed as a standard piece of equipment for the PW125C washer. Ensures full performance compliance and high durability and reliability.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.