PIPE CLEANING PROBE 10 M 68500066
- Pipe cleaning probe 10 m 68500066 Oleo-Mac - professional unclogging of pipes, drains and sewers with pressure washer PW115C, PW125C. Effectively removes blockages without chemicals.
PIPE CLEANING PROBE 10 M 68500066 - PROFESSIONAL INSTALLATION UNCLOGGING WITH OLEO-MAC PRESSURE WASHER
10m pipe cleaning probe 68500066 is a practical 10m high-pressure hose designed for mechanical-hydraulic cleaning and unclogging of pipes using a pressure washer. Thanks to the special nozzle design and flexible hose, the probe effectively removes blockages from sewer systems, drains and drain pipes, saving time and the cost of calling a professional.
Pipe cleaning probe. Eliminates obstacles blocking pipe capacity.
Fits the following Oleo-Mac washers: PW115C; PW125C;
Review photo
What is a 10m pipe cleaning probe 68500066 and how it works?
The 10 m pipe cleaning probe 68500066 is a specialized high-pressure hose ending in a working nozzle that is inserted into the pipe. When connected to an Oleo-Mac pressure washer (model PW115C or PW125C), high-pressure water is directed through a nozzle whose jets are directed diagonally backward. This causes the probe to automatically "pull" deep into the pipe and simultaneously break up and flush out blockages.
As a result, the user does not need to use chemicals or mechanical spirals - the probe bases its action solely on the power of the water jet. It is safer for the installation and at the same time very effective against grease, soap deposits, organic residues or sand that accumulates in the pipes.
Installation of 10 m pipe cleaning probe 68500066 in Oleo-Mac PW115C and PW125C pipe washers
The probe is designed for quick and easy installation on Oleo-Mac high-pressure washers. It is equipped with the appropriate connectors that allow you to seamlessly connect it in place of a standard hose or as a dedicated accessory to the washer gun.
The assembly process consists of:
- disconnect the standard cable or lance from the washer gun,
- connecting a 10 m pipe cleaning probe 68500066 with a quick-connector or thread dedicated to PW115C and PW125C models,
- gradual insertion of the probe tip into the pipe to be cleaned and starting the washer with appropriately selected pressure.
Examples of installation applications:
- connecting the probe to the washer in the garage and throttling the sewer leading to the municipal sewer system,
- installation of the probe during cleanup work on the plot - cleaning long drainage pipes from the gazebo or summer house,
- periodic flushing of the rainwater system from the roof, after connecting the probe on the terrace or balcony.
Oleo-Mac 10 m pipe cleaner probe 68500066 - home and garden applications
The 10 m pipe cleaning probe 68500066 is designed for a wide range of applications in both households and small service companies. Its length of 10 meters allows it to reach deep into the installation, which significantly increases the effectiveness of cleaning.
Typical application areas:
- Draining kitchen sinks - Effective removal of grease and food residues accumulated in drain pipes.
- Bathroom drains - Removal of blockages from hair, soaps and detergents in floor traps and pipes.
- Drainage systems and rain gutters - flushing out leaves, sand and silt deposited in drain pipes and drains around the building.
- Sewer connections - Periodic cleaning of short sections of drains, which reduces the risk of sewage backflows.
Thanks to the use of Oleo-Mac's own pressure washer, the user gains the ability to quickly respond to emerging blockages, without the need to use aggressive decongestant chemicals or call a sewer emergency service.
Durability, build quality and comfort with 10 m probe 68500066
The 10 m pipe cleaning probe 68500066 is made of flexible, pressure- and abrasion-resistant cable that stands up well to the harsh conditions inside pipes. Robust brass connectors and working tip ensure long product life even with frequent use.
Key user benefits:
- Abrasion resistance - the pipe is protected from mechanical damage that may occur inside the pipes (roughness, fittings, deposits).
- Flexibility - adequate flexibility makes it easier to guide the probe through elbows and bends, which is important for long installation sections.
- Safety for the installation - no metal spirals or sharp tools minimize the risk of damage to PVC, PP or traditional cast iron pipes.
In everyday use, this means that pipes can be cleaned quickly and effectively, even in older installations, without worrying about unsealing or rupture. For the user, this translates into real savings - one purchase of a probe can replace multiple visits by a professional.
Save time and money - why choose the Oleo-Mac 10 m pipe probe 68500066?
Buying a 10m pipe cleaning probe 68500066 is an investment that pays off quickly. Instead of waiting for a plumber's appointment, you can remove the blockage as soon as it is detected. Combined with an Oleo-Mac washer, you create your own reliable plumbing service kit for your home, business or lot.
Examples of situations in which the probe will work perfectly:
- backed-up water in the kitchen sink before the holidays - quickly unclog the pipes without any downtime in preparations,
- flooding after heavy rainfall - unblocking drains and rain drains so that water does not pour into the garage,
- regular cleaning of pipes in guesthouses, hotels or catering establishments - preventing downtime and unpleasant odors.
With this probe you can carry out preventive measures - periodic flushing of the installation significantly reduces the risk of serious blockages. A simple way to keep your pipes unobstructed all year round.
Key features and benefits of the 10 m pipe cleaner probe 68500066
- cable length: 10 m - makes it possible to reach deeper blockages,
- purpose: cleaning and unclogging of pipes, drains, sewer connections, drain pipes,
- compatibility: Oleo-Mac PW115C, PW125C high-pressure washers,
- principle of operation: a high-pressure water jet breaks up and flushes out obstacles blocking the capacity of pipes,
- savings: eliminates or significantly reduces the need to call a plumber and use expensive chemicals,
- convenience: quick installation to the washer, easy guidance in the pipe, one person can work alone,
- safety: no sharp parts, no aggressive chemicals, friendly to domestic installations and the environment.
FAQ - Frequently asked questions about the 10 m pipe cleaner probe 68500066
1. Which pipe cleaners the 10m pipe cleaning probe fits into 68500066?
The probe is designed to work with Oleo-Mac high-pressure washers, especially the PW115C and PW125C models. It is equipped with the proper connectors to ensure proper fit with these devices.
2. Can I use the probe in plastic (PVC, PP) installations?
Yes, the probe is suitable for use in typical sewer systems made of PVC or PP. The water jet effectively removes debris, and the lack of sharp elements minimizes the risk of damage to pipes. However, it is recommended to adjust the pressure of the washer according to the recommendations of the plant manufacturer.
3. How deep can I insert the probe into the pipe?
The working length of the cable is 10 meters. This means that - depending on the layout of the installation - you can reach up to several elbows and branches, which is usually enough to unclog most household drains and connections.
4. Do I need chemicals to work with the probe to unclog pipes?
No, the operation of the probe is based solely on the power of the high-pressure water jet. In most cases, there is no need for additional chemistry - it's a greener and safer solution for the pipes.
5. Can I use the probe outdoors, such as for cleaning rain pipes?
Yes, the probe is perfect for cleaning drain pipes, linear drains or drains around the building. Allows you to remove leaves, sand and sediment that restrict the flow of water, reducing the risk of flooding and flooding of the basement or garage.
6. How often should I use the probe in the installation?
The frequency depends on the intensity of use of the installation. In a typical household, it is a good idea to prophylactically flush the most stressed sections (e.g., kitchen sink, main bathroom drains) every few months or whenever you notice slower water drainage.
7. Does operating the probe require special skills?
No, the installation and operation of the probe are intuitive. Just connect it to the washer, gradually insert it into the pipe and control the feed during operation. It is recommended that you familiarize yourself with the instructions of the washer and follow the basic safety rules for working with high-pressure equipment.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.