FOAM NOZZLE 68500063
- Original Oleo-Mac foam nozzle 68500063 for PW115C and PW125C washers. Provides dense active foam, effective dirt removal, detergent savings and quick connect quick connect installation.
Foaming nozzle 68500063 for Oleo-Mac PW115C and PW125C washers - professional detergent foaming for maximum cleaning efficiency
Foam nozzle 68500063 is an original accessory for Oleo-Mac high-pressure washers, designed for fast and effective cleaning of various surfaces using active foam. Thanks to its specially designed nozzle, the nozzle transforms the detergent solution into a dense, well-adhered foam that dissolves dirt, deposits and greasy contaminants, making it easier to rinse them off with a stream of water.
What is the Foam Dish 68500063?
It is a factory foam detergent delivery nozzle, designed for specific models of Oleo-Mac washers. Comes standard on selected equipment, but is also great as a spare part or additional emergency nozzle when the original one wears out.
Where the foam nozzle is mounted 68500063?
The nozzle is mounted directly on the gun / lance of the high-pressure cleaner in place of the standard working tip. A special quick-release coupling allows instant replacement, without the use of tools. Once it is in place, the washer sucks the detergent out of the container (or internal tank, depending on the model) and feeds it out in the form of foam.
Basic use of foam nozzle 68500063 is any cleaning work that requires the use of a chemical agent: washing a car, motorcycle, bicycle, paving stones, building facades, fences, garden machinery and equipment, tools, as well as terrace surfaces or garden landscaping elements.
Product Description:
Foam nozzle. Comes standard with PW115C; PW125C washers.
Fits the following Oleo-Mac washers: PW115C; PW125C;
Review photo
Oleo-Mac foam nozzle 68500063 - perfect fit for PW115C and PW125C washers
1. Original manufacturer's part - assurance of compatibility
Foam nozzle 68500063 has been specially designed for washers Oleo-Mac PW115C and PW125C. Thus, you are guaranteed full compatibility with the device's hydraulics and pressure system. You don't have to look for replacements and risk leaks or performance degradation - the original component ensures stable operating parameters, and at the same time does not adversely affect the durability of the pump or other components.
2. Quick installation thanks to the "quick connect" connector
The design of the tip allows it to be installed by a simple sliding and snapping motion in the lance socket. Replacing a classic nozzle with a foam nozzle takes few seconds, which, in practice, makes it possible to move seamlessly from pressure washing to detergent application and back again. This is especially important when washing a car or facade, where different stages of work are often intertwined.
3. Everyday applications - one element, many possibilities
The user of PW115C and PW125C washers with nozzle 68500063 can comfortably perform:
- car and motorcycle washing - Application of active foam on the body, rims, wheel arches, which significantly facilitates the detachment of road dirt;
- cleaning of cobblestones and sidewalks - Foaming cleaner helps dissolve tarnish and organic dirt before the actual high-pressure cleaning;
- washing of garden furniture, terraces, fences - foam gently but effectively dissolves dirt, without requiring intensive scrubbing.
Effective detergent application - how the foam nozzle works 68500063?
1. Turning detergent into active foam
Inside the foam nozzle 68500063 there is a specially shaped flow channel that mixes pressurized water with detergent sucked from the chemical system. As a result, the outlet produces dense, homogeneous foam. This form of detergent application is much more effective than traditional spreading of the liquid, because the foam stays on the surface longer and has time to dissolve dirt.
2. Save time and cleaning products
Well aerated foam covers more surface area with the same amount of chemical. As a result reduces the use of detergent, and work becomes more economical. The user can wash a car, terrace or facade in less time because the foam "works" for him, reducing the need for manual scrubbing.
3. Practical examples of use
- At washing the car the foam applied from the nozzle 68500063 covers the body, windows and rims, after which it is enough to wait a few minutes for the dirt to soften, and then rinse with clean water under pressure.
- During cleaning the fence made of metal or PVC, the foam reaches the nooks and crannies of the profiles where it would be difficult to reach with a sponge or brush.
- During the washing the terrace or paving stones, the foaming agent helps dissolve green tarnish, mud and greasy stains, which significantly reduces the time for subsequent rinsing.
Durability, simplicity of use and safety of work with foam nozzle 68500063
1. Durable material resistant to chemicals
Foam nozzle is made of high quality plastic resistant to pressurized water, standard cleaning detergents and typical operating temperature fluctuations of household washers. As a result does not corrode, is not quickly scratched and its components do not bake or deform.
2. Easy maintenance and cleaning
After finishing work, simply rinse the nozzle with clean water to remove residual detergent from the flow channels. Regular rinsing prolongs its life and prevents chemicals from drying up. Thanks to its uncomplicated design, even a less experienced user can easily take care of its technical condition.
3. Safe use for home and semi-professional applications
Properly selected flow cross-section ensures that the nozzle does not cause excessive pressure increase in the system, and thus does not load the pump beyond the values provided by the manufacturer. This is important for the safety of the user and the durability of the entire washer. In practice, this means less risk of failure and quiet operation for years to come with proper operation of the PW115C or PW125C.
Technical data - foam nozzle 68500063
- Product type: foam nozzle for high-pressure cleaner
- Purpose: application of detergent in the form of foam
- Model/code: 68500063
- Compatibility: oleo-Mac PW115C, Oleo-Mac PW125C washers
- Connector type: quick connect (quick connect) - installation on the gun / lance of the washer
- Material: high-quality plastic resistant to water and detergents
- Color: black
- Intended use: domestic and household applications, cleaning work around the house, garage and garden
- EAN code: 8026619065515
FAQ - frequently asked questions about the foam nozzle 68500063
Question 1: Does the foam nozzle 68500063 fit other washer models than PW115C and PW125C?
Answer: The nozzle is designed for Oleo-Mac washers PW115C and PW125C. For other models or brands, compatibility is not guaranteed. If you want to use it with another washer, check the compatibility of the connector and the recommendations of the device manufacturer.
Question 2: Can I use any detergent with this nozzle?
Answer: It is recommended to use detergents designed for high-pressure cleaners and agents recommended by the manufacturer of the washer. Using overly aggressive or thick formulations can shorten nozzle life or degrade foaming quality.
Question 3: How to properly install a foam nozzle 68500063?
Answer: Turn off the washer and relieve the pressure in the system, then remove the currently used nozzle from the lance. Then insert the foam nozzle into the socket of the quick coupler and press down until it clearly engages. After starting the machine, select the detergent feeding mode according to the washer instructions.
Question 4: How to take care of the nozzle to make it last as long as possible?
Answer: Rinse the system with clean water after use by running the washer without detergent for a few tens of seconds. Periodically inspect the nozzle outlet to make sure it is not clogged with deposits. Store the item in a dry, clean place, away from strong chemicals.
Question 5: Will the foam nozzle replace all other tips for the washer?
Answer: No. The foam nozzle is mainly used for application of detergent in the form of foam. For rinsing and proper high-pressure cleaning, it is recommended to use standard jet nozzles, turbo nozzles or other tips provided by the washer manufacturer.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.